17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

Interface solution for writing-induced nano-deformation of slider body

Writing-induced nano-deformation of slider body becomes a big concern when the mechanical spacing between the head and disk is continuously reduced to achieve higher magnetic recording areal density. Reduced head–disk spacing increases the risk of head/disk contact and causes the thermal instability in head–disk interface (HDI). This paper reports authors’ efforts towards exploration of interface solutions for writing-induced instability in ultra-low head–disk spacing magnetic system. Multi-shallow step structure with optimized rail position is analyzed and a new femto slider with such structure is explored. The results of numerical simulation indicate that the multi-shallow step structure is an effective approach in reducing the flying height change caused by the writing-induced nano-deformation of the slider body.     

含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数     

模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。     

一种基于灰度变换的红外图像增强算法

针对红外图像，采用双门限分割法进行图像分割，然后采用分段灰度变换法进行图像增强。根据具体图像，通过人机交互的方式确定2个阈值，将图像分割为目标区、过渡区和背景区3部分；按照每一部分的特点，设计不同的灰度变换，对图像进行分段线性增强，得到感兴趣目标区的最佳视觉效果。通过对16位红外图像进行实验，得到了满意的结果。实验表明,该算法灵活便捷，在增加对比度和去除噪声的同时，还抑制了背景，达到了预期的效果。     

低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

准二维无序系统的电子结构

对形如N_t×N_l型准二维无序系统，只考虑格点之间的最近邻跳跃积分，采用特殊的格点编号方案，在单电子近似下，系统的哈密顿量可表示为简明对称矩阵，借助豪斯荷尔德变换将其约化为对称三对角矩阵，再利用负本征值理论及传输矩阵等方法,对系统态密度、局域长度及电导等电子结构特性进行数值计算. 重点研究了准一维四平行链和五平行链无序系统， 将结果与一维单链、准一维双链及三链系统进行对比，发现随维度的增加，系统的能带有所展宽，能态密度分布发生很大的变化，其峰值数量呈偶数规律增加. 并且在能带中心处存在有局域长度大于系统大小的扩展态，处于这些态下的系统具有较大电导. 从单链到多链，相当于扩大了系统的关联范围，使系统出现了类似非对角长程关联的行为. 关键词： 准二维无序系统 态密度 局域长度 电导     

Microstructure of a-SiOx:H

A set of a-SiO_x:H (0.52 <x< 1.58) films are fabricated by plasma-enhanced-chemical-vapor-deposition (PECVD) method at the substrate temperature of 250°C. The microstructure and local bonding configurations of the films are investigated in detail using micro-Raman scattering, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It is found that the films are structural inhomogeneous, with five phases of Si, Si₂O:H, SiO:H, Si₂O₃:H and SiO₂ that coexist. The phase of Si is composed of nonhydrogenated amorphous silicon (a-Si) clusters that are spatially isolated. The average size of the clusters decreases with the increasing oxygen concentration x in the films. The results indicate that the structure of the present films can be described by a multi-shell model, which suggests that a-Si cluster is surrounded in turn by the subshells of Si₂O:H, SiO:H, Si₂O₃:H, and SiO₂.