Failure of elastomeric polymers due to rate dependent bond rupture

A new cohesive zone model is developed in order to study the mechanisms of adhesive and cohesive failures of soft rubbery materials. The fracture energy is estimated here using a strategy similar to that of Lake and Thomas (LT) by considering the dissipation of stored elastic energy followed by the extension and relaxation of polymer chains. The current model, however, departs from that of LT in that the force needed to break an interfacial bond does not have a fixed value; instead, it depends on the thermal state of the system and the rate at which the force is transmitted to the bond. While the force required to rupture a chain is set by the rules of thermomechanically activated bond dissociation kinetics, extension of a polymer chain is modeled within both the linear and nonlinear models of chain elasticity. Closed form asymptotic solutions are obtained for the dependence of crack propagation speed on the energy release rate, which are valid in two regimes: (I) slow crack velocity or short relaxation time for bond dissociation; (II) fast crack velocity or long relaxation time for bond dissociation. The rate independent and the zero temperature limit of this theory correctly reduces to the fracture model of LT. Detailed comparisons are made with a previous work by Chaudhury et al. which carried out an approximate analysis of the same problem.     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.     

Sm2O3对CuO-γ-Al2O3催化剂性能的影响

在色谱微反流动法实验装置上考察了负载Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂ＣＯ氧化活性的影响，并运用Ｘ射线衍射（ＸＲＤ）、程序升温还原（ＴＰＲ）及程序升温脱附（ＴＰＤＭＳ）技术研究了Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂的物相结构、氧化还原特性及表面氧的脱附与恢复行为的影响。结果表明，负载适量的Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂表面氧的脱出与恢复有促进作用，可使部分γＡｌ２Ｏ３相变成γＡｌ２Ｏ３和θＡｌ２Ｏ３的混合型。负载适量的Ｓｍ２Ｏ３能改善催化活性，而负载过量的Ｓｍ２Ｏ３则使ＣｕＯ催化剂上ＣｕＯ的晶粒增大，从而对催化活性起了抑制作用。     

稀土金属作用下芳香醛、酮的还原偶联反应

由Ln/ROH/TMSCl组成的体系能选择性地使芳香族醛、酮还原偶联形成频哪醇, 产率优良, 而对脂肪族醛酮呈惰性。     

Nd-Fe-B磁体烧结过程晶粒长大行为的研究

定量描述了Nd-Fe-B磁体烧结过程晶粒长大行为，分析了烧结温度、烧结时间、合金粉末粒度及其分布对烧结过程晶粒长大的影响，讨论了烧结过程晶粒长大机制。在Nd-Fe-B磁体烧结过程开始之后的0—1h时间区段，晶粒长大迅速；随着烧结时间的延长，晶粒长大速度减小。合金粉末平均粒度增大，或者合金粉末粒度分布范围增宽，显著促进Nd-Fe-B磁体烧结过程中晶粒的长大。在Nd-Fe-B磁体的烧结过程中，存在两类晶粒长大机制，即Nd2Fe14B颗粒的溶解与析出、Nd2Fe14B颗粒的并合与长大。Nd2Fe14B颗粒的并合与长大不仅使磁体的平均晶粒尺寸增大，也使晶粒尺寸分布范围增宽，是烧结Nd-Fe-B磁体显微组织中出现异常大晶粒的根本原因。     

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENEVINYLENE）

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.