On the mechanism of electroluminescence emission by porous silicon layers

The analytical treatment of a model considering the electrooxidation of p-porous silicon layers under galvanostatic conditions is able to give account of experimental facts such as the shape and location of the electroluminescence peak as well as of the spectral shift of the electroluminescence peak produced by oxidation. The proposed model considers electroluminescence to be the result of electron injection into the conduction band by an adsorbed intermediate produced by electrooxidation of the surface coverage with hydrogen or siloxene of the silicon nanocrystallites. The access of holes to the surface is made possible by low accumulation layer conditions and is the rate determining step in the electroluminescence mechanism. In this way it is possible to give a satisfactory explanation to the shift towards the blue experimented by the electroluminiscence emission maximum as a consequence of electrooxidation.     

Enzymatic oxidation of tert-butylcatechol in the presence of sulfhydryl compounds: Application to the amperometric detection of penicillamine

The high sensitivity that can be attained using an enzymatic system and mediated by 4-tert-butylcatechol (4-TBC) has been verified by on-line interfacing of a rotating biosensor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP, [EC 1.11.1.7], immobilized on a rotating disk, in presence of hydrogen peroxide catalyzed the oxidation of 4-TBC, whose back electrochemical reduction was detected on glassy carbon electrode surface at −150 mV. Thus, when penicillamine (PA) was added to the solution, these thiol-containing compounds participate in Michael type addition reactions with 4-TBC to form the corresponding thioquinone derivatives, decreasing the peak current obtained proportionally to the increase of its concentration. The highest response for PA was obtained around pH 7. This method could be used to determine PA concentration in the range 0.02-80 μM (r = 0.998). The determination of PA was possible with a limit of detection of 7 nM, in the processing of as many as 50 samples per hour. The HRP-rotating biosensor was successfully applied to the determination of PA in pharmaceutical formulations.     

Analysis of cocaine and its principal metabolites in waste and surface water using solid-phase extraction and liquid chromatography–ion trap tandem mass spectrometry

A validated method based on solid-phase extraction (SPE) and liquid chromatography-ion trap tandem mass spectrometry (LC-MS/MS) is described for the determination of cocaine (COC) and its principal metabolites, benzoylecgonine (BE) and ecgonine methyl ester (EME), in waste and surface water. Several SPE adsorbents were investigated and the highest recoveries (95.7 +/- 5.5, 91.8 +/- 2.2 and 72.5 +/- 5.3% for COC, BE and EME, respectively) were obtained for OASIS HLB(R) cartridges (6 mL/500 mg) using 100 mL of waste water or 500 mL of surface water. Extracts were analysed by reversed-phase (RP) or hydrophilic interaction (HILIC) LC-MS/MS in positive ion mode with multiple reactions monitoring (MRM); the latter is the first reported application of the HILIC technique for drugs of abuse in water samples. Corresponding deuterated internal standards were used for quantification. The method limits of quantification (LOQs) for COC and BE were 4 and 2 ng L(-1), respectively, when RPLC was used and 1, 0.5 and 20 ng L(-1) for COC, BE and EME, respectively, with the HILIC setup. For COC and BE, the LOQs were below the concentrations measured in real water samples. Stability tests were conducted to establish the optimal conditions for sample storage (pH, temperature and time). The degradation of COC was minimal at -20 degrees C and pH = 2, but it was substantial at +20 degrees C and pH = 6. The validated method was applied to a set of waste and surface water samples collected in Belgium.     

Towards a consistent mechanism of emulsion polymerization—new experimental details

The application of atypical experimental methods such as conductivity measurements, optical microscopy, and nonstirred polymerizations to investigations of the ‘classical’ batch ab initio emulsion polymerization of styrene revealed astonishing facts. The most important result is the discovery of spontaneous emulsification leading to monomer droplets even in the quiescent styrene in water system. These monomer droplets with a size between a few and some hundreds of nanometers, which are formed by spontaneous emulsification as soon as styrene and water are brought into contact, have a strong influence on the particle nucleation, the particle morphology, and the swelling of the particles. Experimental results confirm that micelles of low-molecular-weight surfactants are not a major locus of particle nucleation. Brownian dynamics simulations show that the capture of matter by the particles strongly depends on the polymer volume fraction and the size of the captured species (primary free radicals, oligomers, single monomer molecules, or clusters).     

Insertion reactions of [M(SR)3(PMe2Ph)2] with CS2 (M = Ru, Os; R = C6F4H-4, C6F5). X-ray structures of [Ru(S2CSC6F4H-4)2(PMe2Ph)2], trans-thiolates [M(SR)2(S2CSR)(PMe2Ph)2] (M = Ru; R = C6F5 and M = Os; R = C6F4H-4), and trans-thiolate-phosphine [Os(SC6F5)2(S2CSC6F5)(PMe2Ph)2

Reactions of [M(SR)(3)(PMe(2)Ph)(2)] (M = Ru, Os; R = C(6)F(4)H-4, C(6)F(5)) with CS(2) in acetone afford [Ru(S(2)CSR)(2)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 1; C(6)F(5), 3) and trans-thiolates [Ru(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 2; C(6)F(5), 4) or the isomers trans-thiolates [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 5; C(6)F(5), 7) and trans-thiolate-phosphine [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 6; C(6)F(5), 8) through processes involving CS(2) insertion into M-SR bonds. The ruthenium(III) complexes [Ru(SR)(3)(PMe(2)Ph)(2)] react with CS(2) to give the diamagnetic thiolate-thioxanthato ruthenium(II) and the paramagnetic ruthenium(III) complexes while osmium(III) complexes [Os(SR)(3)(PMe(2)Ph)(2)] react to give the paramagnetic thiolate-thioxanthato osmium(III) isomers. The single-crystal X-ray diffraction studies of 1, 4, 5, and 8 show distorted octahedral structures. (31)P [(1)H] and (19)F NMR studies show that the solution structures of 1 and 3 are consistent with the solid-state structure of 1.     

Study of hydromagnesite and magnesium hydroxide based fire retardant systems for ethylene-vinyl acetate containing organo-modified montmorillonite

A new flame retardant (FR) system for ethylene-vinyl acetate, mainly based on the combination of hydromagnesite (HM, obtained from an industrial by-product) and organo-modified montmorillonite (oMMT) has been compared with a magnesium hydroxide (MDH) and oMMT flame retardant system. The presence of oMMT in association with both hydrated minerals gave a strong decrease of heat release rate in cone calorimeter tests. Moreover, the HM/oMMT combination leads to a better improvement of resistance to ignition and self-extinguishability in comparison with the MDH/oMMT one. The study of residues formed during thermal decomposition revealed the formation of forsterite (Mg₂SiO₄) when either MDH or HM was used in combination with oMMT. SEM observations of residues showed sintering of the mineral particles at high temperature particularly in the case of HM/oMMT composition.     

Differential thermal analysis of the Al+20% (Fe-50%B) system

In the present study, aluminium and mechanically alloyed (36 h) Fe/B (50 wt%) are mixed. Al+20 (wt%) Fe/B mixture has been studied by differential thermal analysis to determine the aluminium quantity that is supposed to melt and afterwards does not solidify as it reacts with Fe/B powder. The different areas between endothermic reaction (melting peak) and exothermic reaction (solidification peak) allow in knowing the quantity of aluminium that reacts with Fe/B and the amount of intermetallic phases formed at high temperature. In order to follow the process, compacts were sintered at different temperatures (700, 800, 900, 1000 and 1200 °C), in N₂/10H₂/0.1CH₄ atmosphere. Microstructure was evaluated by image analysis and the results obtained by both techniques are compared.