Selenides and diselenides containing oxadiazoles: a new class of functionalised materials

A simple and efficient procedure for the synthesis of a new class of organoselenium liquid crystal compounds was developed. The coupling of aryl bromides with elemental selenium was catalysed using copper oxide nanopowder in the presence of potassium hydroxide employing dimethyl sulfoxide as the solvent. This is the first report of the synthesis and characterisation of liquid crystal-based diselenides. Their mesophases were characterised by polarising optical microscopy and differential scanning calorimetry. Compounds 1, 2 and 4b exhibited the smectic A phase. In addition, these compounds showed weak blue fluorescence in solution (λ_{max. em.} 350–405 nm) and a Stokes shift of around 90 nm.     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

UHPLC-DAD Characterization of Origanum vulgare L. from Atacama Desert Andean Region and Antioxidant,Antibacterial and Enzyme Inhibition Activities

The Lamiaceae family is an important source of species among medicinal plants highly valued for their biological properties and numerous uses in folk medicine. Origanum is one of the main genera that belong to this family. The purpose of the study was to determine the phenolic composition of the Origanum vulgare extract and evaluate the antimicrobial, antioxidant, and inhibitory activities of this species that grows in the Andean region of the Atacama Desert. High-performance liquid chromatography was performed to determine the main phenols. Rosmarinic acid was identified as the predominant phenolic compound in this species (76.01 mg/100 g DW), followed by protocatechuic acid, which to our knowledge, no previous study reported similar concentrations in O. vulgare. The oregano extract exhibited a content of total phenolic (3948 mg GAE/100 g DW) and total flavonoid (593 mg QE/100 g DW) with a higher DPPH antioxidant activity (IC₅₀ = 40.58 µg/mL), compared to the same species grown under other conditions. Furthermore, it was found to inhibit α-glucosidase activity with an IC₅₀ value (7.11 mg/mL) lower than acarbose (129.32 mg/mL). Pseudomonas syringae and Pantoea agglomerans (both MIC 0.313 mg/mL and MBC 1.25 mg/mL) were the bacteria most susceptible to oregano extract with the lowest concentration necessary to inhibit bacterial growth. These results open the door for the potential use of this plant to manage chronic diseases, and they expand the knowledge of the species cultivated in arid environmental conditions.     

Mitigating heat dissipation in Raman lasers using coherent anti-stokes Raman scattering

We present a novel technique that intrinsically mitigates the quantum-defect heating in Raman lasers. The basic principle of this so-called "coherent anti-Stokes Raman scattering (CARS)-based heat mitigation" is to suppress the phonon creation in the Raman medium by increasing the number of out-coupled anti-Stokes photons with respect to the number of out-coupled Stokes photons. We demonstrate with the aid of numerical simulations that for a hydrogen and a silicon Raman laser, CARS-based heat mitigation efficiencies of at least 30% and 35%, respectively, can be obtained.     

Ionic Organic Film Sensor for Determination of Phenolic Compounds

This paper describes the development of a new sensor based on an ionic organic film. The amphiphilic molecule, 4‐[(4‐decyloxyphenyl)‐ethynyl]‐1‐methylpyridinium iodide (10PyI), which has liquid‐crystalline properties, was synthesized and applied in the construction of a GCE/10PyI sensor. Analytical parameters for caffeic acid, repeatability (4.8 %), reproducibility (2.8 %), linearity (two ranges: 9.9×10^?7 to 3.8×10^?5 mol L^?1 and 4.7×10^?5 to 9.9×10^?5 mol L^?1) and detection limits (9.0×10^?7 mol L^?1 and 8.7×10^?6 mol L^?1), were determined. The method was successfully applied in the determination of total phenolic compounds (TPC) in mate herb extracts.     

Phosphatidylcholine‐Coated Iron Oxide Nanomicelles for In Vivo Prolonged Circulation Time with an Antibiofouling Protein Corona

We report the synthesis of micellar phosphatidylcholine‐coated superparamagnetic iron oxide nanoparticles as a new long circulation contrast agents for magnetic resonance imaging. Oleic acid‐coated Fe₃O₄ nanoparticles were first prepared through thermal degradation and then encapsulated into small clusters with a phosphatidylcholine coating to obtain hydrophilic nanomicelles. A thorough characterization confirmed the chemical nature of the coating and the excellent colloidal stability of these nanomicelles in aqueous media. Magnetization and relaxivity properties proved their suitability as magnetic resonance imaging (MRI) contrast agent and in vitro cell viability data showed low toxicity. Vascular lifetime and elimination kinetics in the liver were assessed by blood relaxometry and by in vivo MRI in rats and compared with “control” particles prepared with a polyethylene glycol derivative. These micellar particles had a lifetime in blood of more than 10 h, much longer than the control nanoparticles (≈2 h), which is remarkable considering that the coating molecule is a small biocompatible zwitterionic phospholipid. The protein corona was characterized after incubation with rat serum at different times by high‐throughput proteomics, showing a higher proportion of bound apolipoproteins and other dysopsonins for the phosphatidylcholine particles. The antibiofouling properties of this corona and its resistance to the adsorption of proteins corroborate the observed enhanced stability and prolonged systemic circulation.     

X-Ray Crystallography and Free Energy Calculations Reveal the Binding Mechanism of A2A Adenosine Receptor Antagonists

We present a robust protocol based on iterations of free energy perturbation (FEP) calculations, chemical synthesis, biophysical mapping and X-ray crystallography to reveal the binding mode of an antagonist series to the A_2A adenosine receptor (AR). Eight A_2AAR binding site mutations from biophysical mapping experiments were initially analyzed with sidechain FEP simulations, performed on alternate binding modes. The results distinctively supported one binding mode, which was subsequently used to design new chromone derivatives. Their affinities for the A_2AAR were experimentally determined and investigated through a cycle of ligand-FEP calculations, validating the binding orientation of the different chemical substituents proposed. Subsequent X-ray crystallography of the A_2AAR with a low and a high affinity chromone derivative confirmed the predicted binding orientation. The new molecules and structures here reported were driven by free energy calculations, and provide new insights on antagonist binding to the A_2AAR, an emerging target in immuno-oncology.     

Asymmetric Transfer Hydrogenation of gem-Difluorocyclopropenyl Esters: Access to Enantioenriched gem-Difluorocyclopropanes

Catalytic enantioselective access to disubstituted functionalized gem-difluorocyclopropanes, which are emerging fluorinated motifs of interest in medicinal chemistry, was achieved through asymmetric transfer hydrogenation of gem-difluorocyclopropenyl esters, catalyzed by a Noyori–Ikariya (p-cymene)-ruthenium(II) complex, with (N-tosyl-1,2-diphenylethylenediamine) as the chiral ligand and isopropanol as the hydrogen donor. The resulting cis-gem-difluorocyclopropyl esters were obtained with moderate to high enantioselectivity (ee=66–99 %), and post-functionalization reactions enable access to valuable building blocks incorporating a cis- or trans-gem-difluorocyclopropyl motif.     

Evaluation of 3D Printed Gelatin‐Based Scaffolds with Varying Pore Size for MSC‐Based Adipose Tissue Engineering

Adipose tissue engineering aims to provide solutions to patients who require tissue reconstruction following mastectomies or other soft tissue trauma. Mesenchymal stromal cells (MSCs) robustly differentiate into the adipogenic lineage and are attractive candidates for adipose tissue engineering. This work investigates whether pore size modulates adipogenic differentiation of MSCs toward identifying optimal scaffold pore size and whether pore size modulates spatial infiltration of adipogenically differentiated cells. To assess this, extrusion‐based 3D printing is used to fabricate photo‐crosslinkable gelatin‐based scaffolds with pore sizes in the range of 200–600 µm. The adipogenic differentiation of MSCs seeded onto these scaffolds is evaluated and robust lipid droplet formation is observed across all scaffold groups as early as after day 6 of culture. Expression of adipogenic genes on scaffolds increases significantly over time, compared to TCP controls. Furthermore, it is found that the spatial distribution of cells is dependent on the scaffold pore size, with larger pores leading to a more uniform spatial distribution of adipogenically differentiated cells. Overall, these data provide first insights into the role of scaffold pore size on MSC‐based adipogenic differentiation and contribute toward the rational design of biomaterials for adipose tissue engineering in 3D volumetric spaces.