Enzymatic oxidation of tert-butylcatechol in the presence of sulfhydryl compounds: Application to the amperometric detection of penicillamine

The high sensitivity that can be attained using an enzymatic system and mediated by 4-tert-butylcatechol (4-TBC) has been verified by on-line interfacing of a rotating biosensor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP, [EC 1.11.1.7], immobilized on a rotating disk, in presence of hydrogen peroxide catalyzed the oxidation of 4-TBC, whose back electrochemical reduction was detected on glassy carbon electrode surface at −150 mV. Thus, when penicillamine (PA) was added to the solution, these thiol-containing compounds participate in Michael type addition reactions with 4-TBC to form the corresponding thioquinone derivatives, decreasing the peak current obtained proportionally to the increase of its concentration. The highest response for PA was obtained around pH 7. This method could be used to determine PA concentration in the range 0.02-80 μM (r = 0.998). The determination of PA was possible with a limit of detection of 7 nM, in the processing of as many as 50 samples per hour. The HRP-rotating biosensor was successfully applied to the determination of PA in pharmaceutical formulations.     

Ionic Organic Film Sensor for Determination of Phenolic Compounds

This paper describes the development of a new sensor based on an ionic organic film. The amphiphilic molecule, 4‐[(4‐decyloxyphenyl)‐ethynyl]‐1‐methylpyridinium iodide (10PyI), which has liquid‐crystalline properties, was synthesized and applied in the construction of a GCE/10PyI sensor. Analytical parameters for caffeic acid, repeatability (4.8 %), reproducibility (2.8 %), linearity (two ranges: 9.9×10^?7 to 3.8×10^?5 mol L^?1 and 4.7×10^?5 to 9.9×10^?5 mol L^?1) and detection limits (9.0×10^?7 mol L^?1 and 8.7×10^?6 mol L^?1), were determined. The method was successfully applied in the determination of total phenolic compounds (TPC) in mate herb extracts.     

Structural characterisation and thermo-physical properties of glasses in the Li<Subscript>2</Subscript>O–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–K<Subscript>2</Subscript>O system

This article aims to shed some light on the structure and thermo-physical properties of lithium disilicate glasses in the system Li₂O–SiO₂–Al₂O₃–K₂O. A glass with nominal composition 23Li₂O–77SiO₂ (mol%) (labelled as L₂₃S₇₇) and glasses containing Al₂O₃ and K₂O with SiO₂/Li₂O molar ratios (3.13–4.88) were produced by conventional melt-quenching technique in bulk and frit forms. The glass-ceramics (GCs) were obtained from nucleation and crystallisation of monolithic bulk glasses as well as via sintering and crystallisation of glass powder compacts. The structure of glasses as investigated by magic angle spinning-nuclear magnetic resonance (MAS-NMR) depict the role of Al₂O₃ as glass network former with four-fold coordination, i.e., Al(IV) species while silicon exists predominantly as a mixture of Q ³ and Q ⁴ (Si) structural units. The qualitative as well as quantitative crystalline phase evolution in glasses was followed by differential thermal analysis (DTA), X-ray diffraction (XRD) adjoined with Rietveld-reference intensity ratio (R.I.R.) method, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The possible correlation amongst structural features of glasses, phase composition and thermo-physical properties of GCs has been discussed.     

Application of solid-phase microextraction combined with gas chromatography-mass spectrometry to the determination of butylated hydroxytoluene in bottled drinking water

Butylated hydroxytoluene (BHT) is an antioxidant utilized as additive in foods and packaging plastic. Its presence in drinking water is possible if it is used as an antioxidant in the packaging plastic because it may migrate into the package's contents. A method for the determination of BHT in water by means of solid-phase microextraction and gas chromatography-mass spectrometry has been developed and evaluated with respect to the time of fiber exposure, limits of detection and quantitation, linearity and precision. Finally, the method was applied to evaluate the presence of this substance in samples of mineral and mineralized bottled drinking water, and it appeared to be present in seven out of a total of fifteen commercial brands.     

Nitrogen inversion in cyclic amines and the bicyclic effect

The hitherto unsolved problem of the origin of the unusually high nitrogen inversion-rotation (NIR) barriers in 7-azabicyclo[2.2.1]heptanes (the bicyclic effect) was examined using the natural bond orbital (NBO) approach. Reinvestigating the NIR barrier for tropane by DNMR, we found that NIR barriers increase smoothly on going from nitrogen-bridged bicyclic systems of a larger ring size to the smaller ring homologous systems. The experimental NIR barriers are reproduced with good accuracy using the MP2/6-31G level of theory. The NBO analysis for these and other azabicycles led to the conclusion that the height of these barriers is mostly determined by the energy of the sigma-orbitals of the C(alpha)(-)C(beta) bonds as well as the nitrogen lone pair. Thus, the bicyclic effect is actually an extreme case of a common C(alpha-)N-C(alpha) tripyramid geometry-NIR barrier dependence for N-bridged bicyclic amines. By establishing the rate-determining role of the C(alpha-)N-C(alpha) tripyramid fragment for NIR, we have derived the first sufficiently accurate quantitative correlations amine geometry-NIR barrier for monocyclic as well as bicyclic N-H and N-Me amines (i.e., for an amine set which also includes the bicyclic effect systems).     

Photodynamics of the bacteriochlorophyll-carotenoid system. 2. Influence of central metal,solvent and beta-carotene on photobleaching of bacteriochlorophyll derivatives

Bacteriochlorophyll (BChl) derivatives (with central Mg replaced by metal "M") ([M]-BChl with M = 2H, Mg, Zn, Pd, Cu) have been investigated for their photodynamic capacity and stability toward photodegradation in organic solvents and aqueous micellar solution. A protocol has been developed for screening new sensitizers. BChl and [Zn]-BChl are efficient sensitizers, but they are also quickly degraded by the reactive oxygen species (ROS) produced by autosensitization, as well as by hetero-sensitization with 17(4)-methyl-13(2)-demethoxycarbonyl-pheophorbide a (MPP). Photostable [Cu]-BChl is a poor sensitizer, whereas [Pd]-BChl and bacteriopheophytin a are not only very efficient sensitizers but are also very stable toward ROS. beta-Carotene is no efficient physical quencher of ROS in the system; rather, it acts as a photochemical quencher that competes with [M]-BChl and undergoes photooxygenation at high rates. Photolability seems to depend on the pigment oxidation potential and, in parallel, on the presence of central metals preferring coordination numbers higher than 4, whereas photodynamic capacity depends on long excited state life-times of the pigment or efficient intersystem crossing (or both).     

Characterisation of the ester-substituted products of the reaction of p-t-butyl calix[4]arene and ethyl bromoacetate using LC-UV-MS and LC-DAD

A series of derivatisation reactions between p-t-butyl calix[4]arene and ethyl bromoacetate were carried out in order to prepare 1,3 diester substituted calix[4]arene. Mass spectral data, obtained from direct injection of samples, indicated that the reactions were rich in the desired product. Since the ultra violet (UV) spectra of the desired product and possible impurities are very similar, liquid chromatography (LC) chromatographic data seemed to corroborate these results. However, when on-line LC-UV-MS was carried out and each LC peak subjected to MS analysis as it eluted, a very different picture emerged. It was found that many of these reactions actually contained high levels of the monoester product which, having less affinity for sodium in the MS, is therefore seriously underestimated in any direct injection assay. LC-diode array detection (DAD) methods were also used to help successfully identify and characterise the compounds being formed in these complex reactions. The overall results obtained in this paper allowed the optimal reaction conditions to be determined for this reaction. LC-MS analysis of the chromatographic peaks also identified the presence of two isomers of the diester substituted calix[4]arene (1,3 and 1,2 diesters). The combination of LC and UV/MS detection is required for accurate analysis of the products of such reactions.     

Synthesis and structure of a heptanuclear nickel(II) complex uniquely exhibiting four distinct binding modes,two of which are novel,for a hydroxamate ligand

The reaction of 2-(dimethylamino)phenylhydroxamic acid (2-dmAphaH) with NiSO(4).6H2O gives the complex [Ni7(2-dmAphaH-1)2(2-dmApha)8(H2O)2]SO(4).15H2O uniquely exhibiting four distinct hydroxamate binding modes, two of which are novel, and showing both antiferromagnetic and ferromagnetic interactions in contrast to [Cu5(2-dmAphaH-1)4(HSO4)2(MeOH)2].2MeOH, a strongly antiferromagnetic metallacrown formed with CuSO(4).5H2O.     

Stereochemical study of phosphonothioate cleavage by a metallomicelle

[reaction: see text] The copper metallomicellar hydrolysis of O-methyl O-4-nitrophenyl phenylphosphonothioate to O-methyl phenylphosphonothioic acid takes place with effectively complete inversion at phosphorus.