An evaluation of acid digestion methods for amniotic fluid phospholipids

Five methods of acid digestion of amniotic fluid phospholipids for inorganic phosphate release were evaluated at a temperature of 225 °C and a heating time of 30 min. The methods used the following digestants: (A (perchloric acid), B (perchloric acid containing molybdate), C (sulfuric acid, 30% hydrogen peroxide, 5% urea), D (sulfuric-perchloric acids), and E (sulfuric-perchloric acids with vanadium pentoxide). After digestion and dilution with water, a hydrogen ion concentration of about 2.5 mol/ liter was obtained that permitted the use of stannous chloride-hydrazine sulfate as the reducing agent for phosphate color development. Recoveries of the different amniotic fluid phospholipids and aqueous phosphate standards were quantitative for all methods. A comparative study with amniotic fluids showed similar results for all methods. Since all methods were found to be equivalent under the specified conditions described, the choice was dependent upon the user's preference.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Ferric-ion-photosensitized damage to DNA by hydroxyl and non-hydroxyl radical mechanisms.

Iron(III) and UVA (320-400 nm) light strongly diminished the transforming activity of Haemophilus influenzae DNA in the presence of oxygen. Iron(III) alone in the absence of light had no measurable effect on the transforming activity. The chelating agent ethylenediaminetetraacetic acid (EDTA) conferred virtually complete protection, but hydroxyl radical scavengers (mannitol, methanol, ethanol, isopropanol and dimethyl sulfoxide) inhibited only a small fraction of the inactivation. Treatment of plasmid DNA (pBR322) with iron(III) results in the conversion of the covalently closed circular form of the plasmid to open circles and ultimately to the linear form. Concomitant with the alteration in the conformation of the plasmid, the ability to transform Escherichia coli was reduced. In model systems, iron(III) photoreacted with the DNA backbone causing nicking and double-strand breakage. The results are consistent with a mechanism involving a preliminary complexation of iron(III) by DNA followed by the generation of reactive free radicals other than .OH. We suggest that bound iron, or other UV-absorbing transition metal complexes, may be chromophores capable of causing DNA damage in the long-wave near-UV region.     

Chemical force titrations of amine- and sulfonic acid-modified poly(dimethylsiloxane)

Chemical force titrations-measurements of the adhesive interaction between a pair of suitably chemically modified atomic force microscopy (AFM) tip and sample surfaces as a function of pH-have been carried out for various combinations of silanol, amine, carboxylic acid, and sulfonic acid functional groups on both tip and sample. The primary surface material studied was poly(dimethylsiloxane) (PDMS). Surface modification was carried out using a plasma oxidation process to form silanol sites; further modification with amine or sulfonic acid sites was carried out by reaction of the silanol sites with the appropriate trialkoxysilane derivative. AFM tips were also modified using trialkoxysilane compounds. In the cases of tip/sample combinations with the same functional group on each, surface pK(1/2) values could be determined. In several "mixed" tip/sample combinations, a peak appeared in the titration curve midway between the surface pK(1/2) values of the tip and sample, consistent with an ionic H-bonding model for the interactions. The amine/sulfonic acid pair showed more complex behavior; the amine-terminated tip/sulfonic acid-terminated PDMS surface force titration curve consisted of two peaks centered at pH 4 and pH 8. Reversing the tip/sample pair resulted in the peak positions being shifted upward by 1.0 pH unit. The peak appearing at lower pH is assigned to electrostatic interactions between the two oppositely charged surfaces, whereas the higher pH peak is believed to arise due to ionic H-bonding interactions. AFM images show the effects on surface patterning of amine- and sulfonic acid-modified PDMS surfaces that have undergone two different oxidation methods (air plasma oxidation and Tesla coil oxidation). The surface morphologies of freshly prepared and 24 h aged air plasma oxidized PDMS are also discussed in this study.     

Metal Cyanide Ions Mx(CN)y]+,- in the gas phase: M = Fe,Co, Ni,Zn, Cd,Hg, Fe + Ag,Co + Ag

The generation of metal cyanide ions in the gas phase by laser ablation of M(CN)(2) (M = Co, Ni, Zn, Cd, Hg), Fe(III)[Fe(III)(CN)(6)] x xH(2)O, Ag(3)[M(CN)(6)] (M = Fe, Co), and Ag(2)[Fe(CN)(5)(NO)] has been investigated using Fourier transform ion cyclotron resonance mass spectrometry. Irradiation of Zn(CN)(2) and Cd(CN)(2) produced extensive series of anions, [Zn(n)(CN)(2n+1)](-) (1 < or = n < or = 27) and [Cd(n)(CN)(2n+1)](-) (n = 1, 2, 8-27, and possibly 29, 30). Cations Hg(CN)(+) and [Hg(2)(CN)(x)](+) (x = 1-3), and anions [Hg(CN)(x)](-) (x = 2, 3), are produced from Hg(CN)(2). Irradiation of Fe(III)[Fe(III)(CN)(6)] x xH(2)O gives the anions [Fe(CN)(2)](-), [Fe(CN)(3)](-), [Fe(2)(CN)(3)](-), [Fe(2)(CN)(4)](-), and [Fe(2)(CN)(5)](-). When Ag(3)[Fe(CN)(6)] is ablated, [AgFe(CN)(4)](-) and [Ag(2)Fe(CN)(5)](-) are observed together with homoleptic anions of Fe and Ag. The additional heterometallic complexes [AgFe(2)(CN)(6)](-), [AgFe(3)(CN)(8)](-), [Ag(2)Fe(2)(CN)(7)](-), and [Ag(3)Fe(CN)(6)](-) are observed on ablation of Ag(2)[Fe(CN)(5)(NO)]. Homoleptic anions [Co(n)(CN)(n+1)](-) (n = 1-3), [Co(n)(CN)(n+2)](-) (n = 1-3), [Co(2)(CN)(4)](-), and [Co(3)(CN)(5)](-) are formed when anhydrous Co(CN)(2) is the target. Ablation of Ag(3)[Co(CN)(6)] yields cations [Ag(n)(CN)(n-1)](+) (n = 1-4) and [Ag(n)Co(CN)(n)](+) (n = 1, 2) and anions [Ag(n)(CN)(n+1)](-) (n = 1-3), [Co(n)(CN)(n-1)](-) (n = 1, 2), [Ag(n)Co(CN)(n+2)](-) (n = 1, 2), and [Ag(n)Co(CN)(n+3)](-) (n = 0-2). The Ni(I) species [Ni(n)(CN)(n-1)](+) (n = 1-4) and [Ni(n)(CN)(n+1)](-) (n = 1-3) are produced when anhydrous Ni(CN)(2) is irradiated. In all cases, CN(-) and polyatomic carbon nitride ions C(x)N(y)(-) are formed concurrently. On the basis of density functional calculations, probable structures are proposed for most of the newly observed species. General structural features are low coordination numbers, regular trigonal coordination stereochemistry for d(10) metals but distorted trigonal stereochemistry for transition metals, the occurrence of M-CN-M and M(-CN-)(2)M bridges, addition of AgCN to terminal CN ligands, and the occurrence of high spin ground states for linear [M(n)(CN)(n+1)](-) complexes of Co and Ni.     

Built to order: molecular tinkertoys from the [Re(6)(mu(3)-Se)(8)](2+) clusters

Ligand substitution of [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CH(3)CN)](SbF(6))(2) (1) with pyridyl-based ligands, 2,4,6-tri-4-pyridyl-1,3,5-triazine (L1) and 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (L2), produced respectively the star-shaped tricluster (T1) and tetracluster (T2) arrays, wherein three (T1) and four (T2) units of the [Re(6)(mu(3)-Se)(8)](2+) core-containing clusters are interconnected by the corresponding bridging ligands. These novel supramolecular assemblies were characterized by a combination of NMR ((1)H and (31)P) spectroscopy, ESI-MS, and microanalysis. The molecular and solid-state structures of T1 have also been established by single-crystal X-ray diffraction.     

Production of ethanol from pulp mill hardwood and softwood spent sulfite liquors by genetically engineeredE. coli

Applied Biochemistry and Biotechnology - Although lignocellulosic biomass and wastes are targeted as an attractive alternative fermentation feedstock for the production of fuel ethanol, cellulosic...     

Construction of recombinant Escherichia coli strais for production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate)

Plastic wastes constitute a worldwide environmental problem, and the demand for biodegradable plastics has become high. One of the most important characteristics of microbial polyesters is that they are thermoplastic with environmentally degradable properties. In this study, pUC 19/PHA was cloned and transformed into three different Escherichia coli strains. Among the three strains that were successfully expressed in the production of polyhydroxyalkanoates (PHA), E. coli HMS174 had the highest yield in the production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-HV]). The cell dry weight and PHA content of recombinant HMS174 reached as high as 10.27 g/L and 43% (w/w), respectively, in fed-batch fermentor culture. The copolymer of PHA, P(HB-HV), was found in the cells, and the biopolymers accumulated were identified and analyzed by gas chromatography, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. We demonstrated clearly that the E. coli host for PHA production has to be carefully selected to obtain a high yield. The results obtained indicated that a superior E. coli with high PHA production can be constructed with a desirable ratio of P(HB-HV), which has potential applications in industry and medicine.     

New prodrugs derived from 6-aminodopamine and 4-aminophenol as candidates for melanocyte-directed enzyme prodrug therapy (MDEPT)

Two novel tyrosinase mediated drug delivery pathways have been investigated for the selective delivery of cytotoxic units to melanocytes from urea and thiourea prodrugs. The synthesis of these prodrugs is reported, as well as oximetry data that illustrate that the targets are substrates for tyrosinase. The stability of each of the prodrugs in (i) phosphate buffer and (ii) bovine serum is discussed, and the urea prodrugs are identified as lead candidates for further studies. Finally, HPLC studies and preliminary cytotoxicity studies in a melanotic and an amelanotic cell line, that illustrate the feasibility of the approach, are presented.     

Conductance behavior of 1:1 electrolytes in 3-methyl-2-oxazolidone at 25°C

The conductance behavior of twenty-five 1∶1 electrolytes has been investigated in 3-methyl-2-oxazolidone (3Me20x) at 25°C. Conductance data were analyzed by the Lee-Wheaton equation, and all salts studied were found to be only slightly associated. Ionic limiting equivalent conductances were obtained using tris(iso-pentyl)butylammonium tetraphenylborate as a reference electrolyte. The relative values of the ionic limiting molar conductance are generally similar to those for other dipolar aprotic solvents. However, the order $$\lambda _0 (i - Pent_3 BuN^ + ) > \lambda _0 (Pent_4 N^ + )and\lambda _0 (Br^ - ) > \lambda _0 (ClO_4^ - )$$ is opposite to that found previously in the similar solvent 3-tert-bytyl-2-oxazolidone.