Microstructural analysis of hard amorphous carbon films deposited with high-energy ion beams

Hard amorphous carbon films produced using high-energy (ca. 30 keV) ion beam deposition of CH₃⁺ and CH₄⁺ on silicon wafers, have been investigated by Positron Annihilation Spectroscopy (PAS), the results are correlated with Raman Spectroscopy and Electrical Resistivity measurements. The microstructural modifications of the films as a function of the annealing temperature in the 300–600°C range have been studied. The evolution of the fractions of sp² and sp³ bonds is described and related to the changes of the open volume defect distribution and the graphitization process.     

Polymer Brushes Showing Non‐Fouling in Blood Plasma Challenge the Currently Accepted Design of Protein Resistant Surfaces

Ultra‐low‐fouling poly[N‐(2‐hydroxypropyl) methacrylamide] (poly(HPMA)) brushes have been synthesized for the first time. Similar to the so far only ultra‐low‐fouling surface, poly(carboxybetaine acrylamide), the level of blood plasma fouling was below the detection limit of surface plasmon resonance (SPR, 0.03 ng · cm⁻²) despite being a hydrogen bond donor and displaying a moderate wettability, thus challenging the currently accepted views for the design of antifouling properties. The antifouling properties were preserved even after two years of storage. To demonstrate the potential of poly(HPMA) brushes for the preparation of bioactive ultra‐low fouling surfaces a label‐free SPR immunosensor for detection of G Streptococcus was prepared.

     

Entropy and Diffraction of the k-Free Points in n-Dimensional Lattices

We consider the $k$ k th-power-free points in $n$ n -dimensional lattices and explicitly calculate their entropies and diffraction spectra. This is of particular interest since these sets have holes of unbounded inradius.     

Toward a mechanistic understanding of exciton-mediated hydrosilylation on nanocrystalline silicon

White-light initiated hydrosilylation of nanocrystalline porous silicon was found to be far more efficient (in terms of both kinetics and yield) in the presence of electron-accepting molecules with suitably high reduction potentials, particularly halocarbons. It is known that absorption of visible light by nanocrystalline silicon results in the formation of excitons (electron/hole pairs) and that this exciton can be harnessed to drive a hydrosilylation reaction with an alkene; the Si-C bond forms as a result of attack of the π-electrons of the alkene on the positively charged holes. In order to better understand the white-light initiated mechanism through which this reaction takes place, and to compare with UV-mediated photoemission on Si(111)-H, a series of electron acceptors were screened for their effect on surface alkene hydrosilylation. A very strong correlation between reduction potentials (E(red)) of the oxidant and reaction efficiency was observed, with a minimum "turn-on" E(red) required for an increase to take place. The oxidant appears to accept, or remove, the electron from the nanocrystallite-bound exciton, favoring attack by the alkene on the positively charged Si nanocrystallite, leading to Si-C bond formation. Radical reactions were discounted for a number of reasons, including lack of effect of radical traps, no apparent Si-Cl bond formation, lack of oxidation of the surfaces, and others. Unlike with other oxidants such as nitro-aromatics, halocarbons do not cause additional surface reactions and promote very clean, fast, and selective hydrosilylation chemistry.     

Versatile nanocomposites in phosphoproteomics: A review

Protein phosphorylation is one of the most important post-translational modifications. Phosphorylated peptides are present in low abundance in blood serum but play a vital role in regulatory mechanisms and may serve as casual factors in diseases. The enrichment and analysis of phosphorylated peptides directly from human serum and mapping the phosphorylation sites is a challenging task. Versatile nanocomposites of different materials have been synthesized using simple but efficient methodologies for their enrichment. The nanocomposites include magnetic, coated, embedded as well as chemically derivatized materials. Different base materials such as polymers, carbon based and metal oxides are used. The comparison of nanocomposites with respective nanoparticles provides sufficient facts about their efficiency in terms of loading capacity and capture efficiency. The cost for preparing them is low and they hold great promise to be used as chromatographic materials for phosphopeptide enrichment. This review gives an overview of different nanocomposites in phosphoproteomics, discussing the improved efficiency than the individual counterparts and highlighting their significance in phosphopeptide enrichment.     

Fourier transform infrared imaging analysis in discrimination studies of squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) of the oral cavity and oropharynx represents more than 95% of all malignant neoplasms in the oral cavity. Histomorphological evaluation of this cancer type is invasive and remains a time consuming and subjective technique. Therefore, novel approaches for histological recognition are necessary to identify malignancy at an early stage. Fourier transform infrared (FTIR) imaging has become an essential tool for the detection and characterization of the molecular components of biological processes, such as those responsible for the dynamic properties of tumor progression. FTIR imaging is a modern analytical technique enabling molecular imaging of a complex biological sample and is based on the absorption of IR radiation by vibrational transitions in covalent bonds. One major advantage of this technique is the acquisition of local molecular expression profiles, while maintaining the topographic integrity of the tissue and avoiding time-consuming extraction, purification, and separation steps. With this imaging technique, it is possible to obtain unique images of the spatial distribution of proteins, lipids, carbohydrates, cholesterols, nucleic acids, phospholipids, and small molecules with high spatial resolution. Analysis and visualization of FTIR imaging datasets are challenging and the use of chemometric tools is crucial in order to take advantage of the full measurement. Therefore, methodologies for this task based on the novel developed algorithm for multivariate image analysis (MIA) are often necessary. In the present study, FTIR imaging and data analysis methods were combined to optimize the tissue measurement mode after deparaffinization and subsequent data evaluation (univariate analysis and MIAs). We demonstrate that it is possible to collect excellent IR spectra from formalin-fixed paraffin-embedded (FFPE) tissue microarrays (TMAs) of OSCC tissue sections employing an optimised analytical protocol. The correlation of FTIR imaging to the morphological tissue features obtained by histological staining of the sections demonstrated that many histomorphological tissue patterns can be visualized in the colour images. The different algorithms used for MIAs of FTIR imaging data dramatically increased the information content of the IR images from squamous cell tissue sections. These findings indicate that intra-operative and surgical specimens of squamous cell carcinoma tissue can be characterized by FTIR imaging.     

Microdroplets in Microfluidics: An Evolving Platform for Discoveries in Chemistry and Biology

Microdroplets in microfluidics offer a great number of opportunities in chemical and biological research. They provide a compartment in which species or reactions can be isolated, they are monodisperse and therefore suitable for quantitative studies, they offer the possibility to work with extremely small volumes, single cells, or single molecules, and are suitable for high‐throughput experiments. The aim of this Review is to show the importance of these features in enabling new experiments in biology and chemistry. The recent advances in device fabrication are highlighted as are the remaining technological challenges. Examples are presented to show how compartmentalization, monodispersity, single‐molecule sensitivity, and high throughput have been exploited in experiments that would have been extremely difficult outside the microfluidics platform.     

A glimpse at the chemistry of GeH2 in solution. Direct detection of an intramolecular germylene-alkene π-complex

The photochemistry of 3-methyl-4-phenyl-1-germacyclopent-3-ene (4) and a deuterium-labeled derivative (4-d(2)) has been studied in solution by steady state and laser flash photolysis methods, with the goal of detecting the parent germylene (GeH(2)) directly and studying its reactivity in solution. Photolysis of 4 in C(6)D(12) containing acetic acid (AcOH) or methanol (MeOH) affords 2-methyl-3-phenyl-1,3-butadiene (6) and the O-H insertion products ROGeH(3) (R = Me or Ac) in yields of ca. 60% and 15-30%, respectively, along with numerous minor products which the deuterium-labeling studies suggest are mainly derived from hydrogermylation processes involving GeH(2) and diene 6. The reaction with AcOH also affords H(2) in ca. 20% yield, while HD is obtained from 4-d(2) under similar conditions. Photolysis of 4 in THF-d(8) containing AcOH affords AcOGeH(3) and 6 exclusively, indicating that the nucleophilic solvent assists the extrusion of GeH(2) from 4 and alters the mechanism of the trapping reaction with AcOH compared to that in cyclohexane. Laser flash photolysis of 4 in hexanes yields a promptly formed transient exhibiting λ(max) ≈ 460 nm, which decays on the microsecond time scale with the concomitant growth of a second, much longer-lived transient exhibiting λ(max) ≈ 390 nm. The spectrum and reactivity of the 460 nm species toward various germylene trapping agents are inconsistent with those expected for free GeH(2); rather, the transient is assigned to an intramolecular Ge(II)-alkene π-complex of one of the isomeric substituted hydridogermylenes derived from a solvent-cage reaction between GeH(2) and its diene (6) coproduct, formed by addition of HGe-H across one of the C=C bonds. These conclusions are supported by the results of DFT calculations of the thermochemistry associated with π-complexation of GeH(2) with 6 and the formation of the isomeric vinylgermiranes and 1,2-hydrogermylation products. A different species is observed upon laser photolysis of 4 in THF solution and is assigned to the GeH(2)-THF complex on the basis of its UV-vis spectrum and rate constants for its reaction with AcOH and AcOD.     

Simultaneous Quantification of Neomycin and Bacitracin by LC-ELSD

The first simultaneous quantification of neomycin and bacitracin using liquid chromatography evaporative light scattering detection as an alternative to MS detection and pre-/post-column derivatisation, respectively, was the aim of this study. The developed method was validated for two strength of neomycin and one strength of bacitracin in sterile pharmaceutical formulation and is a fast and efficient tool for content uniformity tests in quality control. With this method the separation of neomycin from sulfate and the base line separation of the four major components of bacitracin (bacitracin A, B1, B2 and B3) was achieved. These four components are responsible for 96% of the microbiological activity. A Phenomenex Synergi POLAR analytical column (250 mm × 4.6 mm, 4 μm I.D.) in combination with 0.5% perfluoropropionic acid and acetonitrile in gradient mode, the peaks of interest could be separated with high efficiency within 14 min. The calibration was performed using a second order regression with an R ² = 0.9999 for neomycin (B and C) sulfate and R ² = 0.9996 for bacitracin A, B1, B2 and B3. The results of the accuracy evaluation were 99.2 and 99.7%, respectively, for neomycin and 100.8% for bacitracin. Injection precision results are 0.4–1.5 RSD% recorded for six injections. The established method has a high potential for routine high-throughput analyses in the pharmaceutical industry.