聚阳离子糖缀物氢键诱导TPPS手性聚集

利用原子转移自由基聚合(ATRP)方法制备了亲水性嵌段聚合物聚乙二醇-b-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA),并通过季铵化反应,得到侧链接枝不同单糖分子(葡萄糖、半乳糖、甘露糖)的聚阳离子糖缀物PEG-b-P(DMAEMA-co-DMAEMA-Sac)(Monosaccharide).研究了该聚合物与5,10,15,20-四(对磺酸基苯基)-卟啉(TPPS)在水溶液中的复合自组装行为.研究结果表明,TPPS在该组装体中以J-聚集体形式存在且显示超分子手性特征.手性信号的产生是聚合物侧链糖单元C(4)和C(5)上的羟基与TPPS通过非共价键——氢键相互作用的结果,因此手性信号方向应与糖单元构型有关.通过对比单糖构型发现,具有(4S,5R)构型的糖单元可诱导TPPS产生424 nm正Cotton效应和490 nm负Cotton效应的聚集体,具有(4R,5R)构型的糖单元可诱导TPPS产生424 nm负Cotton效应和490 nm正Cotton效应的聚集体.     

全氟和多氟化合物环境问题研究

全氟和多氟化合物（PFASs）是一类具有重要应用价值的含氟有机化合物,许多全氟和多氟化合物难以光解、水解和被生物降解,因此具有环境持久性,并可沿食物链累积放大。2009年5月9日,全氟辛烷磺酸（PFOS）及其盐和全氟辛烷磺酰氟被正式列入持久性有机污染物（POPs）名单,由此全氟和多氟化合物成为近年最受关注的新型污染物,其环境问题研究进入到了新的广度和深度。本文将就其分析方法、环境存在、生物累积放大效应、人体暴露和健康效应、新型全氟和多氟化合物等方面的研究,特别是2009年PFOS等被纳入POPs公约以来取得的研究新进展,进行较为全面的综述,并在此基础上对有关发展趋势进行展望。     

Active Pd/Fe(OH)x catalyst preparation for nitrobenzene hydrogenation by tracing aqueous phase chlorine concentrations in the washing step of catalyst precursors

By tracing the chlorine concentrations in the aqueous solutions containing the catalyst precursors, Pd/Fe(OH)_x catalysts with different activities can be controllably prepared. For the hydrogenation of nitrobenzene, the active Pd/Fe(OH)_x catalysts were obtained from aqueous solutions with chlorine concentrations below 18 ppm and above 8 ppm.     

One‐Step Hydrothermal Synthesis of Nitrogen‐Doped Carbon Nanotubes as an Efficient Electrocatalyst for Oxygen Reduction Reactions

A high amount of heteroatom doping in carbon, although favorable for enhanced density of catalytically active sites, may lead to substantially decreased electroconductivity, which is necessary for the electrochemical oxygen reduction reaction. Herein, a relatively low amount of nitrogen was successfully doped into carbon nanotubes (CNTs) by a hydrothermal approach in one step, and the synthesized nitrogen‐doped CNT (CNT‐N) materials retained most of the original, excellent characteristics, such as the graphitic structure, tubular morphology, and high surface area, of CNTs. The resultant CNT‐N materials, although containing a relatively low amount of nitrogen doping, exhibited high electrocatalytic ORR activity, comparable to that of 20 wt % Pt/C; long durability; and, more importantly, largely inhibited methanol crossover effect.     

Prevention of postoperative tendon adhesion by biodegradable electrospun membrane of poly(lactide-co-glycolide)

An electrospun poly(lactide-co-glycolide)(PLGA) membrane was prepared and used to perform the anti-adhesion of Achilles tendon. Throughout the experiments, the membrane showed an appropriate degradation rate, and the p H values of degradation media were maintained at around 7.4. Simultaneously, the excellent biocompatibility of the membrane in vitro and in vivo was confirmed by live/dead and histopathological analyses. Meanwhile, the membrane can reduce tendon adhesion significantly and promote functional recovery effectively. The encouraging results were further demonstrated by hematoxylin and eosin(HE), and Masson's trichrome stainings, and type I collagen immunohistochemical analysis. It was concluded that the model treated with the electrospun PLGA membrane was significantly better with respect to the adhesion prevention and tissue repair than that without treatment. Considering the results of degradation and adhesion prevention efficacy, the electrospun PLGA membrane would be a great candidate for the prevention of postoperative tendon adhesion.     

Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.     

有机化学进展(2011~2012)

本文综述了中国大陆地区有机化学研究人员2011至2012年两年内在合成方法学、有机合成化学、元素有机化学以及天然产物化学等领域获得的重要成果。文章中共引用参考文献355篇,其中110多篇手性金属配合物和有机小分子催化的不对称反应、金属催化的碳氢键活化等合成方法学论文和30余篇氟有机化学论文基本来源于德国《应用化学》(国际版)和《美国化学杂志》。本文汇集了中国有机化学家两年中合成的150多个具有生物活性和化学结构多样性的天然产物,其中不乏具有高度挑战性的复杂天然分子。在近两年中中国有机化学家从陆地和海洋的生物体内发现各种不同类型新天然产物90多个。     

核化学与放射化学的研究进展

在我国核能快速发展的新形势下,新型核能资源的开发、乏燃料后处理、放射性废物处理与处置等核燃料循环化学研究日益活跃。随着科学技术的不断发展,离子加速器、反应堆、各种类型的探测器和分析设备、以及计算机技术等的发展,核化学与放射化学研究的范围和成果在不断扩展和增加,如核安全、环境放射化学、放射分析化学、放射性药物与标记化合物等,研究成果对于国防建设、核能发展、核技术应用等方面具有重要支撑作用。本文综述了近年来国内在上述领域所取得的研究进展。共引用参考文献161篇。     

Ca2Y7.9（SiO4）6O2-0.5xFx:Eu0.1（3+,2+）荧光粉的合成和发光特性

采用高温固相反应法在弱还原气氛下制备了Ca2Y7.9(SiO4)6O2-0.5xFx:Eu(2+,3+)0.1(x=0～4)系列荧光粉。晶胞参数a,c和晶胞体积V均随着F-置换量的增加呈线性减小,晶胞参数a和c的变化率相近。荧光体中Eu2+和Eu3+共存,Eu2+3d5/2与Eu3+3d5/2电子结合能分别为1128.4和1136.3 eV,Eu2+的3d5/2与3d3/2的电子结合能差为28.4 eV。Eu2+和Eu3+的3d5/2态XPS峰面积比为6.9∶1。激发光谱由Eu3+的两个电荷迁移(CTS)带和f-f跃迁激发线组成,x=0,1的试样中出现了Eu2+的f-d跃迁强激发谱带。激发到Eu3+的电荷迁移态或激发Eu2+,除了来自Eu3+的5D0能级的发射之外,还观察到了5D1能级的强发射和5D2能级的弱发射,并且激发Eu2+时5D1→7F4发射强度超过5D0→7F2,没有出现Eu2+的明显发射,Eu2+对Eu3+发光起到很好的敏化作用。5DJ(J>0)高能级发射来自4f格位的Eu3+发光中心,Eu2+的敏化起关键作用。Eu3+在4f和6h两种格位的分布比为4∶6。     

CexTi1-xO2复合氧化物表面结构和体相结构的演变

利用X射线衍射、N₂吸附等温线、X射线光电子能谱、X射线吸收谱、H₂-程序升温还原、甲基橙选择化学吸附和等电点测定等方法研究了共沉淀方法制备的一系列Ce_xTi_1-xO₂复合氧化物的结构. 成功发展了甲基橙选择化学吸附和等电点方法研究Ce_xTi_1-xO₂复合氧化物的最外层表面结构, 并定义了“等价CeO₂表面覆盖度”来描述Ce_xTi_1-xO₂复合氧化物的最外层表面结构. Ce_xTi_1-xO₂复合氧化物 (x ≥ 0.7)形成立方萤石相固溶体, Ce_0.3Ti_0.7O₂表现出纯的单斜相, 而其它复合氧化物表现出混合相. Ce_xTi_1-xO₂复合氧化物最外层表面结构的演变行为不同于其体相结构.Ce_0.7Ti_0.3O₂立方萤石相固溶体最外层表面已经部分形成了单斜相Ce_0.3Ti_0.7O₂, 随Ce含量的降低, 单斜相Ce_0.3Ti_0.7O₂从最外层表面向体相生长. Ce_xTi_1-xO₂复合氧化物立方萤石相固溶体和单斜相Ce_0.3Ti_0.7O₂分别在相对较低和较高的温度表现出好的还原性能. 上述结果提供了全面和深层次的Ce_xTi_1-xO₂复合氧化物结构信息.