Pressure pinched injection of nanolitre volumes in planar micro-analytical devices

A new method for injecting and driving fluids by means of a multi-port injection valve and syringe pumps in a micro-channel network is described. A structure composed of two micro-channels arranged as a cross is connected with capillary tubes to an external multi-port injection valve. The fluid flows are driven by pressure and the multi-port valve controls the direction of the flow within the different sections of the structure. The first position of the multi-port valve allows the preparation of the loading of the sample, which is pinched in the cross section of the two micro-channels. The second position allows the precise injection of nL volumes. No dead volume exists between injection and separation modes. The system can be used to prepare a sample plug by pressure in order to perform chromatography with a broad range of buffered or non-buffered solutions. Thanks to the insensitivity to the ionic strength of the sample, this injection method is useful for the injection of complex biological samples in microchip analysis. In order to demonstrate the feasibility of the method, different solutions of ionic or fluorescent molecules were injected and detected in a photoablated planar polymer device.     

Automated determination of verapamil and norverapamil in human plasma with on-line coupling of dialysis to high-performance liquid chromatography and fluorometric detection

A fully automated method for the simultaneous determination of verapamil and its main metabolite norverapamil in human plasma is described. This method is based on on-line sample preparation using dialysis followed by clean-up and enrichment of the dialysate on a precolumn and subsequent HPLC analysis with fluorometric detection. All sample handling operations were performed automatically by a sample processor equipped with a robotic arm (ASTED system). The plasma samples were dialysed on a cellulose acetate membrane (cut-off: 15 kD) and the dialysate was purified and enriched on a short pre-column filled with cyanopropyl silica. Before starting dialysis, this trace enrichment column (TEC) was first conditioned with the HPLC mobile phase and then with pH 3.0 acetate buffer. 370 μl of plasma sample spiked with the internal standard (gallopamil) were dialysed in the static-pulsed mode. The solution at the donor side was pH 3.0 acetate buffer containing Triton X-100 while the acceptor solution was made of the same acetate buffer. When dialysis was discontinued, the analytes were desorbed from the TEC by the HPLC mobile phase and transferred to the C₁₈ analytical column by means of a switching valve. This mobile phase consisted of a mixture of acetonitrile, pH 3.0 acetate buffer and 2-aminoheptane. The influence of different parameters of the dialysis process on the recovery of verapamil and norverapamil has been studied. The effect of the volume, the aspirating and dispensing flow-rates of the dialysis solution has been investigated. The recoveries of verapamil and norverapamil in plasma were close to 75% and the limits of quantification were 5 ng/ml for both analytes. The method was found to be linear in the concentration range from 5 to 500 ng/ml (r²: 0.9996 for both analytes). The intra-day and inter-day reproducibilities at a concentration of 100 ng/ml were 2.3% and 5.6% for verapamil and 1.7% and 5.1% for norverapamil, respectively.     

Microbial products. II. Granaticinic acid,a new antibiotic from a thermophilic streptomycete

Streptomyces sp. XT-11989 produces a mixture of two antibiotics with litmus-like indicator properties. One of them was shown to be identical with granaticin, the other was identified as [1S,3S,4S,7R,9R,10S,13R]-4,7,9,10-tetrahydro-5,12-dioxo-4, 6,10,11,13-pentahydroxy-1,9-dimethyl-(1H,3H)-7,10-ethanonaphtho[2,3-c: 6,7-c]dipyran-3-acetic acid and termed granaticinic acid. Microbial production and nuclear magnetic resonance data of these antibiotics are discussed and the antibacterial properties of the antibiotics are compared.

---

Mikrobielle produkte. II. Granaticinsäure, ein neues Antibiotikum von einem thermophilen Streptomyceten

Zusammenfassung Der Streptomycetenstamm XT-11989 produziert eine Mischung von zwei Antibiotika mit Lakmus-ähnlichen Indikatoreigenschaften. Eines dieser Antibiotika erwies sich als Granaticin, das andere wurde als [1S,3S,4S,7R,9R,10S,13R]-4,7,9,10-tetrahydro-5,12-dioxo-4,6,10,11,13-pentahydroxy-1,9-dimethyl-(1H,3H)-7,10-ethanonaphto[2,3-c: 6,7-c]dipyran-3-essigsäure identifiziert und Granaticinsäure benannt. Mikrobiologische Produktion und Kernresonanzdaten dieser antibiotika werden besprochen und ihre antibakteriellen Eigenschaften verglichen.

     

Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Novel peripherally functionalized seco-porphyrazines: synthesis, characterization and spectroscopic evaluation

Co-macrocyclizations of 2,3-dipropylmaleonitrile and 2,3-di-(4-(methoxycarbonyl)phenyl)maleonitrile, respectively, with N,N′-dibenzyl-N,N′-di-(11-tetrahydropyranyloxy-3,6,9-trioxo-undecyl))maleonitrile and N,N,N′,N′-tetramethylmaleonitrile were used to prepare derivatives of the 4,5-diamino-porphyrazine systems including the zinc(II) complexes. Subsequent oxidation of the macrocycles with potassium permanganate gave the corresponding seco-porphyrazines. These were shown to be efficient sensitizers for the production of singlet oxygen (Φ_Δ=0.15-0.57) by the determination of their photophysical properties.     

Stability of the gold(i)-phosphine bond. A comparison with other group 11 elements

The stability of gold phosphine complexes of the form [Au(PH(3))(n)()](+) (n = 1-4) and [AuCl(PH(3))(n)()] (n = 1-3) is analyzed in detail by applying quantum theoretical methods and compared to the coordination behavior of the lighter group 11 elements copper and silver. It is shown that, once [M(PH(3))(2)](+) or [MClPH(3)] (M = Cu, Ag, and Au) is formed, further coordination by PH(3) ligands is relatively weak; i.e., the energy gain to form [M(PH(3))(3)](+) from [M(PH(3))(2)](+) is less than 60 kJ mol(-)(1), and less than 100 kJ mol(-)(1) to form [MCl(PH(3))(2)] from [MClPH(3)]. Relativistic effects in gold significantly influence these factors and reduce the tendency for phosphine coordination beyond two-coordination. This implies that the most favored coordination number for gold is two with either a linear P-Au-P or P-Au-X arrangement (X = a strongly coordinating ligand like Cl(-)). Instead, X-Au-PH(3) units prefer to interact via close Au-Au contacts (aurophilic interactions) keeping the linear structure approximately intact, while the corresponding copper and silver compounds prefer PH(3) coordination to strongly bound M(2)Cl(2) units (M = Cu or Ag) where two chlorine atoms bridge the two metal atoms thus having the formal coordination number of three for copper or silver.     

Prediction of retention time of phenols in liquid chromatography

The chromatographic behavior of phenols in reversed-phase mode liquid chromatography differs from that of non-ionic compounds such as alkyl alcohols, alkylbenzenes, halogenated benzenes, polyaromatic hydrocarbons, and aromatic acids. Therefore, the retention times of 61 phenols were measured in a system of an octadecyl bonded silica gel and acetonitrile/water mixtures. The logarithm of the capacity ratio (log k') was found to be a linear function of the hydrophobicity (log P) in acidic acetonitrile/water mixtures. This result was applied to a different octadecyl bonded silica gel. Eight phenols were selected as standard compounds, and their log k' values were measured in 0.05 M phosphoric acid in 10 to 90% acetonitrile/water mixtures. An empirical polynomial relation was obtained between the concentration of acetonitrile and the slope of the log k' vs log P curve. Finally the capacity ratio of all phenols were calculated in given eluents by the equations derived from the measurements of standard compounds and the calculated log P values. The difference between predicted capacity ratios and measured ones was within 10%.     

Cyclic voltammetry of highly hydrophilic ions at a supported liquid membrane

Cyclic voltammetry has been used to study the coupling of ion transfer reactions at a liquid membrane. The liquids are either supported by a porous hydrophobic membrane (polyvinylidene difluoride, PVDF) when the organic solvent is non-volatile (o-nitrophenyloctylether) or are merely a free standing organic solvent layer such as 1,2-dichloroethane comprised between two hydrophilic dialysis membranes supporting the adjacent aqueous phases. The passage of current across the liquid membrane is associated with two ion transfer reactions across the two polarised liquid liquid interfaces in series. It is shown that it is possible to study the transfer of highly hydrophilic ions at one interface by limiting the mass transfer of the other ion transfer reaction at the other interface. Indeed, for systems comprising an ion M in one aqueous phase and a reference ion R partitioned between the membrane and the other aqueous phase, the observed and simulated cyclic voltammograms have a half-wave potential determined by the Gibbs energy of transfer of M transferring at one interface and by the limiting mass transfer of R at the other interface. This new methodology opens a way to measure the Gibbs energy of transfer of highly hydrophilic or hydrophobic ions, which usually limits the potential window at single liquid liquid interfaces (ITIES).