Use of the mathematical apparatus of two-component spectrophotometry for the simultaneous catalymetric determination of two anions

Previously studied reactions of aluminum(III) with Xylenol Orange and of cobalt(III) with nitroso-R salt in weakly acidic solutions were proposed for the simultaneous catalymetric determination of carbonate and borate ions and carbonate and phosphate ions, respectively. It was demonstrated that the mathematical apparatus of two-component spectrophotometry is suitable for processing the results of analysis.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 1, 2005, pp. 7–10.Original Russian Text Copyright © 2005 by Mikhailova, Belikov, Blank.     

Functionalized Self-Assembled Monolayers on Gold as Binding Matrices for the Screening of Antibody-Antigen Interactions

Two different types of -substituted alkanethiol/disulfide compounds have been used to prepare monolayer architectures on gold serving as platforms for the immobilization of receptor probe molecules – antibodies. These are: (i) carboxylic acid alkanethiols post-reacted with amino biotin to generate streptavidin surfaces, and (ii) N-hydroxysuccinimide-terminated disulfide surfaces. The properties of the monolayers, with and without attached receptor probe molecules, were analysed using infrared spectroscopy, ellipsometry, fluorescence scanning and atomic force microscopy. Several experimental parameters, such as condensation reagents, additives, probe and target concentrations and immobilization time, were systematically varied to determine the dynamic range and to optimize the sensitivity and signal-to-noise ratio of the biochip platforms. Fluorescence screening using Cy5-labelled antigens finally demonstrated that both surfaces could be successfully employed to immobilize the antibodies. The pros and cons of the two approaches are also discussed.Received November 15, 2002; accepted March 25, 2003 Published online July 28, 2003     

Determination of 3-trifluoromethyl-4-nitrophenol and 3-trifluoromethyl-4-nitrophenol glucuronide in edible fillet tissue of rainbow trout and channel catfish by solid-phase extraction and liquid chromatography

3-Trifluoromethyl-4-nitrophenol (TFM) is a pesticide used for the selective control of sea lampreys (Petromyzon marinus) in stream and river tributaries of the Great Lakes. To determine concentrations of TFM and TFM glucuronide in the edible fillet tissue of fish during sea lamprey control treatments, an analytical method was developed to determine the concentrations of these residues in rainbow trout (Oncorhynchus mykiss; RBT) and channel catfish (Ictalurus punctatis; CCF). Homogenized fillets were extracted with methanol-water (80 + 20). TFM and TFM glucuronide were isolated from coextractives by C18 solid-phase extraction. TFM glucuronide was hydrolyzed to TFM by the addition of beta-glucuronidase to the TFM glucuronide extract. The extracts were analyzed separately by liquid chromatography with UV-visible detection. Recoveries from TFM-fortified CCF and RBT tissues were 84.1 and 96.1%, respectively. The method detection limits (MDLs) are 2.4 ng/g for TFM-fortified tissues of CCF and 3 ng/g for those of RBT. Recoveries were 78.8 and 77% from TFM glucuronide-fortified CCF and RBT tissues, respectively. The MDLs for TFM glucuronide-fortified tissues are 3.5 and 6.9 ng/g for CCF and RBT, respectively.     

Polarographie schwefelhaltiger Proteine

Zusammenfassung An kristallisierten Enzymen des biologischen Stoffwechsel wird gezeigt, daß bei der Polarographie nur die schwefelhaltigen Proteine katalytische Wasserstoffwellen geben. Von den in der Literatur beschriebenen Doppelstufen der Proteine besitzt nur die im negativeren Potentialbereich liegende Welle die eigentliche katalytische Funktion. Die erste Vorwelle von Proteinen verschwindet, wenn die polarographische Messung bei 0° C durchgeführt wird.In Proteinen sind nur Disulfidgruppen katalytisch wirksam. Sogenannte reine Sulfhydryl-Enzyme haben keinen katalytischen Effekt. Typische SH-Enzyme können jedoch polarographisch als p-Chloromercuribenzoatkomplexe gemessen werden.Durch Harnstoffzusatz bei der polarographischen Messung von Proteinen gelingt es, zwischen maskierten und freien Sulfhydryl- oder Disulfidgruppen an Enzymen zu definieren.Auszug aus der Dissertationsschrift H. Katzlmeier, Technische Hochschule München (1959).     

Zinc(II) as a versatile template for the design of dipolar and octupolar NLO-phores

Thermally stable dipolar and octupolar (D2d, D3) NLO-phores are readily accessible by combining one, two, or three 4,4'-bis(dialkylaminostyryl)-[2,2']-bipyridyl ligands with zinc(II) salts. The off-resonant beta0 values point out the superiority of octupoles versus dipoles in terms of nonlinearity/transparency tradeoff. The octahedral tris(bipyridyl)zinc(II) complex exhibits a very large beta0 value (241 x 10-30 esu), which is the largest ever reported for octupolar molecules.     

Arene Complexes of Univalent Gallium,Indium, and Thallium

Arene complexes of main-group metals were, until recently, rare species—in contrast to the now classical, analogous complexes of transition metals. In systematic investigations, it has been possible to prepare and structurally characterize arene complexes of the univalent elements gallium, indium, and thallium, which directly follow the d-block elements in the periodic table. This new type of compound is characterized by centric (η⁶) coordination of the metal to the arene; both mono- and bis(arene) complexes are known. The interaction can be explained by the perfect agreement between the HOMO/LUMO symmetry of the arene and of the low-valent metal. The electronic states of the nd¹⁰(n + 1)s² configuration, which are partially modified by relativistic effects, play a particularly important role. The relationship to the few known complexes of the neighboring elements (Sn^II, Pb^II) becomes plausible via the isoelectronic principle. The arene/Ga^I, In^I, Tl^I systems are of potential significance as homogeneous reducing agents and as agents for the activation of aromatic compounds, the purification of metals, and the separation of metals from nonaqueous media.     

Effect of trace amounts of water on organic solvent transport through gamma-alumina membranes with varying pore sizes

The transport behavior of toluene and n-hexane in gamma-alumina membranes with different pore diameters was studied. It was shown that the permeability of water-lean hexane and toluene is in agreement with Darcy's law down to membrane pore diameters of 3.5 nm. The presence of molar water fractions of 5-8 x 10(-4) in these solvents led to a permeability decrease of the gamma-alumina layer by a factor of 2-4 depending on pore size. In general, a lower permeability was found for hexane than for toluene. Moreover, in the presence of water a minimum applied pressure of 0.5-1.5 bar was required to induce net liquid flow through the membrane. These phenomena were interpreted in terms of capillary condensation of water in membrane pores with a size below a certain critical diameter. This is thought to lead to substantial blocking of these pores for transport, so that the effective tortuosity of the membrane for transport of hydrophobic solvents increases.     

Pressure pinched injection of nanolitre volumes in planar micro-analytical devices

A new method for injecting and driving fluids by means of a multi-port injection valve and syringe pumps in a micro-channel network is described. A structure composed of two micro-channels arranged as a cross is connected with capillary tubes to an external multi-port injection valve. The fluid flows are driven by pressure and the multi-port valve controls the direction of the flow within the different sections of the structure. The first position of the multi-port valve allows the preparation of the loading of the sample, which is pinched in the cross section of the two micro-channels. The second position allows the precise injection of nL volumes. No dead volume exists between injection and separation modes. The system can be used to prepare a sample plug by pressure in order to perform chromatography with a broad range of buffered or non-buffered solutions. Thanks to the insensitivity to the ionic strength of the sample, this injection method is useful for the injection of complex biological samples in microchip analysis. In order to demonstrate the feasibility of the method, different solutions of ionic or fluorescent molecules were injected and detected in a photoablated planar polymer device.     

Automated determination of verapamil and norverapamil in human plasma with on-line coupling of dialysis to high-performance liquid chromatography and fluorometric detection

A fully automated method for the simultaneous determination of verapamil and its main metabolite norverapamil in human plasma is described. This method is based on on-line sample preparation using dialysis followed by clean-up and enrichment of the dialysate on a precolumn and subsequent HPLC analysis with fluorometric detection. All sample handling operations were performed automatically by a sample processor equipped with a robotic arm (ASTED system). The plasma samples were dialysed on a cellulose acetate membrane (cut-off: 15 kD) and the dialysate was purified and enriched on a short pre-column filled with cyanopropyl silica. Before starting dialysis, this trace enrichment column (TEC) was first conditioned with the HPLC mobile phase and then with pH 3.0 acetate buffer. 370 μl of plasma sample spiked with the internal standard (gallopamil) were dialysed in the static-pulsed mode. The solution at the donor side was pH 3.0 acetate buffer containing Triton X-100 while the acceptor solution was made of the same acetate buffer. When dialysis was discontinued, the analytes were desorbed from the TEC by the HPLC mobile phase and transferred to the C₁₈ analytical column by means of a switching valve. This mobile phase consisted of a mixture of acetonitrile, pH 3.0 acetate buffer and 2-aminoheptane. The influence of different parameters of the dialysis process on the recovery of verapamil and norverapamil has been studied. The effect of the volume, the aspirating and dispensing flow-rates of the dialysis solution has been investigated. The recoveries of verapamil and norverapamil in plasma were close to 75% and the limits of quantification were 5 ng/ml for both analytes. The method was found to be linear in the concentration range from 5 to 500 ng/ml (r²: 0.9996 for both analytes). The intra-day and inter-day reproducibilities at a concentration of 100 ng/ml were 2.3% and 5.6% for verapamil and 1.7% and 5.1% for norverapamil, respectively.