Regular arrays of triangular‐microstructure formed on silicon (111) surface via ultrafast laser irradiation in KOH solution

The regular micrometer‐scale triangular arrays were formed using ultrafast femtosecond laser irradiation on (111) surface of silicon wafer immersed in KOH solution (0.1 g/ml). At low laser fluence, the resulting surface is covered by triangular pits microstructures, whereas at high laser fluence, the structures are transformed to multilayer‐triangular stacks‐microstructures. The number of triangular stacks layer increased as the laser fluence increased. The formation of triangle microstructure arrays depends on both silicon surface crystallographic orientation and the concentration of KOH solution. Either for lower KOH solution concentration (0.02 g/ml) or other silicon crystallographic orientation, triangle arrays cannot be obtained. We attribute the formation of triangular microstructure arrays to the laser‐assisted chemical etching process. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Series of C‐6 Unsubstituted Tetrahydropyrimidines: Convenient One‐Pot Chemoselective Synthesis,Aggregation‐Induced and Size‐Independent Emission Characteristics

A new series of C‐6 unsubstituted tetrahydropyrimidines 6 have been directly synthesized via a convenient urea‐catalyzed chemoselective five‐component reaction (5CR) under mild conditions. Compounds 6 show typical aggregation‐induced emission enhancement (AIEE) characteristics because they are practically no emissive in solution but emit blue or green fluorescence in aggregates with fluorescence yield up to 93 %. One of the 5CR products, 6 aa , exhibits blue‐ and green‐fluorescence aggregates (bf‐ and gf‐aggregates). The bf‐ and gf‐aggregates are prepared under different conditions and proved to result from different J‐aggregations by single‐crystal X‐ray analysis. In addition, the bf‐ and gf‐aggregates of 6 aa show unusual size‐independent emission (SIE) characteristics because their maximum emission wavelengths in different sizes (suspension particles, film, powder and crystals) are the same, 434 and 484 nm, respectively. Based on the obtained experimental results, the 5CR mechanism, the origins of AIEE and SIE characteristics are discussed.     

镥晶体的绝热量热法测试和热力学函数

文章合成了Lu(NO₃)₃(C₂H₅O₂N)_4.H₂O,用红外和元素分析对其进行了表征。用高精度全自动绝热量热仪,测定了该配合物80-382 K温区的热容, 利用实验热容数据, 根据热容与焓、熵的热力学关系, 求出了配合物85-350 K温区内每隔5 K相对于298.15K的标准热力学函数(HT - H298.15)m和(ST - S298.15)m.在80-350 K温度区间内,配合物的热容随温度升高而增大,没有相转移点和热力学吸收峰的出现,该配合物在此温度区间内是稳定存在的。     

Thermal degradation kinetics of polyimide containing 2,6-benzobisoxazole units

A novel polyimide (PI) based on 2,6-bis(p-aminophenyl)-benzo[1,2-d;5,4-d′]bisoxazole has been synthesized via a conventional two-stage procedure with bis(ether anhydrides) (HQDPA). The intermediate poly(amic acid) had inherent viscosities of 1.70 dl/g and could be thermally converted into light yellow polyimide film. The resulted polyimide showed excellent thermal stability, and the glass transition temperatures (T_g) were above 283 °C, the 5% weight loss temperature of the polymer was at 572 °C in N₂. The thermal degradation of the polyimide was studied by thermogravimetric analysis (TGA) in order to determine the actual reaction mechanisms of the decomposition process. The activation energy of the solid-state process was determined using Flynn-Wall-Ozawa method, which does not require knowledge of the reaction mechanism, which resulted to be 361.36 kJ/mol. The activation energy of different mechanism models and pre-exponential factor (A) were determined by Coats-Redfern method. Compared with the value obtained from the Ozawa method, the actual reaction mechanism obeyed nucleation and growth model, Avrami-Erofeev function (A₃) with integral form g(X) = [−ln(1−X)]³.     

Molar heat capacity and thermodynamic properties of crystalline [Nd(Glu)(H<Subscript>2</Subscript>O)<Subscript>5</Subscript>(Im)<Subscript>3</Subscript>](ClO<Subscript>4</Subscript>)<Subscript>6</Subscript>·2H<Subscript>2</Subscript>O

A complex of neodymium perchloric acid coordinated with L-glutamic acid and imidazole, [Nd(Glu)(H₂O)₅(Im)₃](ClO₄)₆·2H₂O was synthesized and characterized by IR and elements analysis for the first time. The thermodynamic properties of the complex were studied with an automatic adiabatic calorimeter and differential scanning calorimetry (DSC). Glass transition and phase transition were discovered at 221.83 and 245.45 K, respectively. The glass transition was interpreted as a freezing-in phenomenon of the reorientational motion of ClO₄⁻ ions and the phase transition was attributed to the orientational order/disorder process of ClO₄⁻ ions. The heat capacities of the complex were measured with the automatic adiabatic calorimeter and the thermodynamic functions [H _T-H _298.15] and [S _T-S _298.15] were derived in the temperature range from 80 to 390 K with temperature interval of 5 K. Thermal decomposition behavior of the complex in nitrogen atmosphere was studied by thermogravimetric (TG) analysis and differential scanning calorimetry (DSC).     

PREPARATION AND CHARACTERIZATION OF AFFINITY POLYMER BASIC MICROSPHERES BY SOAP-FREE EMULSION POLYMERIZATION

Poly(styrene-co-glycidyl methacrylate) latex microspheres with uniform size and high-density epoxy groups on the surface were prepared by soap-free emulsion polymerization with batch wise operation mode in the presence of 2.2′- azobis(2-methylpropionamidine) dihydrochloride as an initiator.The kinetics of soap-free emulsion polymerization and the effects of polymerization factors were examined.In addition,the optimum polymerization conditions of poly(styrene-co- glycidyl methacrylate) latex microspheres ...     

Wrinkled Graphene Monoliths as Superabsorbing Building Blocks for Superhydrophobic and Superhydrophilic Surfaces

Superhydrophobic and superhydrophilic surfaces are of great interest because of a large range of applications, for example, as antifogging and self‐cleaning coatings, as antibiofouling paints for boats, in metal refining, and for water–oil separation. An aqueous ink based on three‐dimensional graphene monoliths (Gr) can be used for constructing both superhydrophobic and superhydrophilic surfaces on arbitrary substrates with different surficial structures from the meso‐ to the macroscale. The surface wettability of a Gr‐coated surface mainly depends on which additional layers (air for a superhydrophobic surface and water for a superhydrophilic surface) are adsorbed on the surface of the graphene sheets. Switching a Gr‐coated surface between being superhydrophobic and superhydrophilic can thus be easily achieved by drying and prewetting with ethanol. The Gr‐based superhydrophobic membranes or films should have great potential as efficient separators for fast and gravity‐driven oil–water separation.