Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

Determination of an Unknown Time-dependent Heat Source from A Nonlocal Measurement by Finite Difference Method

In this paper, we consider an inverse time-dependent source problem of heat conduction equation.Firstly, the ill-posedness and conditional stability of this inverse source problem is analyzed. Then, a finite difference inversion method is proposed for reconstructing the time-dependent source from a nonlocal measurement. The existence and uniqueness of the finite difference inverse solutions are rigorously analyzed, and the convergence is proved. Combined with the mollification method, the propos...     

布里渊散射谱拟合的混合优化算法

基于布里渊光时域分析仪的全分布式光纤传感系统中,光纤沿途的探测信号含有噪声导致被测量的温度或应变信息难以识别,光谱拟合的精确度对传感信息的识别非常重要。在传感系统低信噪比的情况下,提出了一种提取高精度布里渊散射谱特征的拟合方法,利用小波去噪结合莱文伯-马奈特（LM）算法调节权值后向传输(BP)网络对布里渊散射谱进行特征提取。克服了传统BP神经网络易陷入局部极值的缺点,保证求解的精度。数值仿真表明,该方法适合不同权重比、不同线宽和低信噪比以及大测量范围的情况进行光谱拟合,并且在信噪比为10 dB的情况下得到拟合度均超过0.96。实验结果表明,该方法适用于多种泵浦功率情况下的布里渊散射谱的特征提取,优于传统BP神经网络算法且具有较高的拟合精度。     

纳米晶钛酸铅表面态对介电性能的影响

将醋酸铅、钛酸四丁酯和硬脂酸在熔融状态下混合均匀后置于冷水浴中，使其凝固成凝胶，经不同温度焙烧，制成纳米晶PbTiO3.用X射线衍射光谱、红外光谱对产物进行表征.采用X射线光电子能谱和表面光电压谱对纳米晶PbTiO3表面状态分析,发现材料表面的不完整性主要是由氧空位造成.暴露在粒子表面的主要是金属离子.随着晶粒尺寸的减小，材料表面氧空位缺陷浓度增加，表面光伏效应增强，谱带变宽.纳米晶PbTiO3材料的表面状态对其极化性质有着重要的影响，使其静态介电常数远大于常规材料的静态介电常数.     

Cation-pi interactions with a model for the side chain of tryptophan: structures and absolute binding energies of alkali metal cation-indole complexes

Threshold collision-induced dissociation techniques are employed to determine bond dissociation energies (BDEs) of mono- and bis-complexes of alkali metal cations, Li+, Na+, K+, Rb+, and Cs+, with indole, C8H7N. The primary and lowest energy dissociation pathway in all cases is endothermic loss of an intact indole ligand. Sequential loss of a second indole ligand is observed at elevated energies for the bis-complexes. Density functional theory calculations at the B3LYP/6-31G level of theory are used to determine the structures, vibrational frequencies, and rotational constants of these complexes. Theoretical BDEs are determined from single point energy calculations at the MP2(full)/6-311+G(2d,2p) level using the B3LYP/6-31G* geometries. The agreement between theory and experiment is very good for all complexes except Li+ (C8H7N), where theory underestimates the strength of the binding. The trends in the BDEs of these alkali metal cation-indole complexes are compared with the analogous benzene and naphthalene complexes to examine the influence of the extended pi network and heteroatom on the strength of the cation-pi interaction. The Na+ and K+ binding affinities of benzene, phenol, and indole are also compared to those of the aromatic amino acids, phenylalanine, tyrosine, and tryptophan to elucidate the factors that contribute to the binding in complexes to the aromatic amino acids. The nature of the binding and trends in the BDEs of cation-pi complexes between alkali metal cations and benzene, phenol, and indole are examined to help understand nature's preference for engaging tryptophan over phenylalanine and tyrosine in cation-pi interactions in biological systems.     

Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte

Anodization of titanium in a fluorinated dimethyl sulfoxide (DMSO) and ethanol mixture electrolyte is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. Using a 20 V anodization potential (vs Pt) nanotube arrays having an inner diameter of 60 nm and 40 nm wall thickness are formed. The overall length of the nanotube arrays is controlled by the duration of the anodization, with nanotubes appearing only after approximately 48 h; a 72 h anodization results in a nanotube array approximately 2.3 mum in length. The photoelectrochemical response of the nanotube-array photoelectrodes is studied using a 1 M KOH solution under both UV and visible (AM 1.5) illumination. Enhanced photocurrent density is observed for samples obtained in the organic electrolyte, with an UV photoconversion efficiency of 10.7%.     

Functionalization and bioactivity in vitro of mesoporous bioactive glasses

Amino and carboxylic groups functionalized mesoporous bioactive glasses (denoted as N-MBGs and C-MBGs, respectively) were successfully synthesized through a post-grafting process and characterized by XRD, N₂ sorption, TEM, FT-IR and TG techniques. Their in vitro bioactivity and degradation behavior were investigated in simulated body fluid and examined by various techniques. The results demonstrate that the bioactivity of all the samples and the morphology of carbonated hydroxyapatite were affected remarkably by the introduction of functional groups. Spherical carbonated hydroxyapatite particles were observed grown on the N-MBGs surfaces after soaking in simulated body fluid for 8 h, which is different from the rod-like carbonated hydroxyapatite grown on conventional mesoporous bioactive glasses. While for C-MBGs, the nucleation and growth rate of carbonated hydroxyapatite was decreased at increased contents of carboxylic groups.     

Strategies for synthesis of adducts of omicron-quinone metabolites of carcinogenic polycyclic aromatic hydrocarbons with 2'-deoxyribonucleosides

Polycyclic aromatic hydrocarbons (PAHs) are major environmental carcinogens produced in the combustion of fossil fuels, tobacco, and other organic matter. Current evidence indicates that PAHs are transformed enzymatically to active metabolites that react with DNA to form adducts that result in mutations. Three activation pathways have been proposed: the diol epoxide path, the radical-cation path, and the quinone path. The latter involves aldo-keto reductase mediated oxidation of PAH dihydrodiol metabolites to catechols that enter into redox cycles with quinones. This results in generation of reactive oxygen species (ROS) that attack DNA, and the PAH quinones also react with DNA to form adducts. Several strategies for synthesis of the stable adducts formed by the o-quinone metabolites of carcinogenic PAHs with 2'-deoxyribonucleosides were investigated and compared. The PAH quinones studied were benz[a]anthracene-3,4-dione and its 7-methyl- and 7,12-dimethyl- derivatives. The parent PAHs represent a range of carcinogenicity from inactive to highly potent. Two synthetic methods were devised that differ in the catalyst employed, Pd(OAc)(2) or CuI. The Pd-mediated method involved coupling a protected amino-catechol PAH derivative with a halo-2'-deoxyribonucleoside. The copper-mediated method entailed reaction of a halo-PAH catechol derivative with a 2'-deoxyribonucleoside. Adducts of benz[a]anthracene-3,4-dione (and its 7-methyl- and 7,12-dimethyl- derivatives) with 2'-deoxyadenosine and 2'-deoxyguanosine were prepared by these methods. Availability of adducts of these types through synthesis makes possible for the first time biological studies to determine the role of these adducts in tumorigenesis. The copper-mediated method offers advantages of economy, adaptability to large-scale preparation, utility for synthesis of (13)C- or (15)N-labeled analogues, and nonformation of bis-adducts as secondary products.     

双向抽运拉曼光纤放大器性能的研究

对双向抽运拉曼光纤放大器(RFA)的噪声特性、增益饱和及抽运功率转换效率进行了详细研究。结果表明,双向抽运拉曼光纤放大器的噪声特性介于前向抽运与后向抽运之间,但主要取决于前向抽运方式所导致的噪声特性;双向抽运方式的饱和功率低于单向抽运方式的饱和功率,同前向抽运与后向抽运提供的增益比例有关;双向抽运方式的抽运功率转换效率同信号光功率及前、后向抽运提供的增益有关,当信号光功率较低时,增加前向抽运的比例可取得较高的抽运功率转换效率,而信号光功率较高时,增加后向抽运的比例可取得较高的抽运功率转换效率。研究一种配置(情况3)的双向抽运拉曼光纤放大器,可以完全补偿100km传输线路的损耗(包括无源器件的损耗),最低光信噪比为30．21dB。     

Isolable chiral aggregates of achiral π-conjugated carboxylic acids

The induced aggregation of achiral building blocks by a chiral species to form chiral aggregates with memorized chirality has been observed for a number of systems. However, chiral memory in isolated aggregates of achiral building blocks remains rare. One possible reason for this discrepancy could be that not much is understood in terms of designing these chiral aggregates. Herein, we report a strategy for creating such isolable chiral aggregates from achiral building blocks that retain chiral memory after the facile physical removal of the chiral templates. This strategy was used for the isolation of chiral homoaggregates of neutral achiral π-conjugated carboxylic acids in pure aqueous solution. Under what we have termed an "interaction-substitution" mechanism, we generated chiral homoaggregates of a variety of π-conjugated carboxylic acids by using carboxymethyl cellulose (CMC) as a mediator in acidic aqueous solutions. These aggregates were subsequently isolated from the CMC templates whilst retaining their memorized supramolecular chirality. Circular dichroism (CD) spectra of the aggregates formed in the acidic CMC solution exhibited bisignated exciton-coupled signals of various signs and intensities that were maintained in the isolated pure homoaggregates of the achiral π-conjugated carboxylic acids. The memory of the supramolecular chirality in the isolated aggregates was ascribed to the substitution of COOH/COOH hydrogen-bonding interaction between the carboxylic acid groups within the aggregates for the hydrogen-bonding interactions between the COOH groups of the building blocks and the chiral templates. We expect that this "interaction-substitution" procedure will open up a new route to isolable pure chiral aggregates from achiral species.