Spectra Studies of Complexes Between Palladium (II), Nickel (II) and Amino Acids

The complexes of Ni (His) 2·H2O, Ni (Gly) 2·2H2O, Pd (His)Cl2·H2O and Pd(Gly) 2·2H2O were synthesized. And the IR, electronic absorption and photoacoustic spectra of these complexes were measured in solid state. The nature of the metal-carboxylate coordinate bond were deduced from the variation in the carboxyl stretching frequencies. And the d-d transition absorptions of these complexes were interpreted quantitatively with the 3d scaling radial theory. Therefore, the structural characterizations were also discussed with their spectral behaviors.     

Experimental measurement of the electrical conductivity of pyroxenite at high temperature and high pressure under different oxygen fugacities

Electrical conductivities of pyroxenite were measured between frequencies of 10^?1 and 10⁶ Hz in a multi-anvil pressure apparatus using different solid buffers (Ni+NiO, Fe+Fe₃O₄, Fe+FeO and Mo+MoO₂) to stabilize the partial pressure of oxygen. The temperature ranged from 1073 to 1423 K (800 to 1200 °C) and the pressure from 1.0 to 4.0 GPa. We observe that: (1) the electrical conductivity (σ) of pyroxenite depends on frequency; (2) σ tends to increase with rising temperature (T), and Log σ and 1/T obey a linear Arrhenius relationship; (3) under control of the buffer Fe+Fe₃O₄, σ tends to decrease with rising pressure, nevertheless the activation enthalpy tends to increase. For the first time we have obtained values for the activation energy and activation bulk volume of the main charge carriers, which are (1.60±0.07) eV and (0.05±0.03) cm³/mol, respectively; (4) for a given pressure and temperature, σ tends to rise with increased oxygen fugacity, whereas the activation enthalpy and preexponential factor tend to decrease; and (5) the behaviour of the electrical conductivity at high temperature and high pressure can be reasonably interpreted by assuming that small polarons provide the dominant conduction mechanism in the pyroxenite samples.     

High pressure X-ray diffraction study on BaWO4-II

BaWO₄-II has been synthesized at 5 GPa and 610°C. Its high pressure behavior was studied by in situ synchrotron X-ray diffraction measurements at room temperature up to 17 GPa. BaWO₄-II retains its monoclinic structure. Bulk and axial moduli determined by fitting a third-order Birch–Murnaghan equation of state to lattice parameters are: K ₀=86.2±1.9 GPa, K ₀(a)=56.0±0.9 GPa, K ₀(b)=85.3±2.4 GPa, and K ₀(c)=146.1±3.2 GPa with a fixed K′=4. Analysis of axial compressible modulus shows that the a-axis is 2.61 times more compressible than the c-axis and 1.71 times more compressible than the b-axis. The beta angle decreases smoothly between room pressure and 17 GPa from 93.78° to 90.90°.     

Phase transitions in PbTe under quasi-hydrostatic pressure up to 50 GPa

PbTe has been investigated using synchrotron X-ray diffraction (XRD) in a diamond anvil cell under quasi-hydrostatic pressures up to 50 GPa. Upon compression to 6.6 GPa, the initial NaCl phase transforms to an intermediate phase, which is confirmed to be an orthorhombic structure with a space group Pnma. At 18.4 GPa, the intermediate Pnma phase undergoes a phase transition to the CsCl structure. The systemic analysis of the crystal structures between the NaCl and intermediate phases indicates that the structure of the Pnma phase could be derived from the distortion of the NaCl structure. The bulk modulus of the CsCl phase is B₀=52(2) GPa with V₀=60.8(4) ų and B′₀=4.0 (fixed), slightly larger than the NaCl phase (B₀=44(1) GPa) and the intermediate phase (B₀=49(3) GPa).     

Investigation of formation mechanism of Ti3SiC2 by high pressure and high-temperature synthesis

ABSTRACT

In this paper, synthesis of titanium silicon carbide (Ti₃SiC₂) under high pressure and high-temperature condition has been investigated by using the reactant systems Ti/Si/C, Ti/SiC/TiC, Ti/SiC/C and Ti/TiC/Si. Results reveal that Ti/TiC/Si is unsuited to the synthesis of Ti₃SiC₂ under a high pressure of 2.0?GPa, while an elemental mixture of Ti/Si/C is applicable. By the addition of Al, Ti₃SiC₂ with 95.8?wt% purity was obtained from elemental mixture with a large excess of silicon. The optimum experimental parameters were determined as Ti/Si/Al/C having the molar ratio of 3:1.5:0.5:1.9, holding at 2.0?GPa and 1300?°C for 60?min.     

Phase transition of samarium under high pressure

Abstract

The DAC X-ray power photograph method was employed for studing the phase transition of samarium up to 26.3 GPa. The experimental results show that the dhcp and fcc high pressure phase of Sm appeared at about 4.0 and 12.5 GPa and room temperature respectively. The dhcp phase was kept until 19.6 GPa. A model for Sm-type -? dhcp -? fcc phase transition is provided in this paper.     

Green ultrasound-assisted extraction of carotenoids based on the bio-refinery concept using sunflower oil as an alternative solvent

A green, inexpensive and easy-to-use method for carotenoids extraction from fresh carrots assisted by ultrasound was designed in this work. Sunflower oil was applied as a substitute to organic solvents in this green ultrasound-assisted extraction (UAE): a process which is in line with green extraction and bio-refinery concepts. The processing procedure of this original UAE was first compared with conventional solvent extraction (CSE) using hexane as solvent. Moreover, the UAE optimal conditions for the subsequent comparison were optimized using response surface methodology (RSM) and ultra performance liquid chromatography – diode array detector – mass spectroscopy (UPLC–DAD–MS). The results showed that the UAE using sunflower as solvent has obtained its highest β-carotene yield (334.75 mg/l) in 20 min only, while CSE using hexane as solvent obtained a similar yield (321.35 mg/l) in 60 min. The green UAE performed under optimal extraction conditions (carrot to oil ratio of 2:10, ultrasonic intensity of 22.5 W cm^?2, temperature of 40 °C and sonication time of 20 min) gave the best yield of β-carotene.     

An experimental and modeling study of the autoignition of 3-methylheptane

An experimental and kinetic modeling study of the autoignition of 3-methylheptane, a compound representative of the high molecular weight lightly branched alkanes found in large quantities in conventional and synthetic aviation kerosene and diesel fuels, is reported. Shock tube and rapid compression machine ignition delay time measurements are reported over a wide range of conditions of relevance to combustion engine applications: temperatures from 678 to 1356 K; pressures of 6.5, 10, 20, and 50 atm; and equivalence ratios of 0.5, 1.0, and 2.0. The wide range of temperatures examined provides observation of autoignition in three reactivity regimes, including the negative temperature coefficient (NTC) regime characteristic of paraffinic fuels. Comparisons made between the current ignition delay measurements for 3-methylheptane and previous results for n-octane and 2-methylheptane quantifies the influence of a single methyl substitution and its location on the reactivity of alkanes. It is found that the three C₈ alkane isomers have indistinguishable high-temperature ignition delay but their ignition delay times deviate in the NTC and low-temperature regimes in correlation with their research octane numbers. The experimental results are compared with the predictions of a proposed kinetic model that includes both high- and low-temperature oxidation chemistry. The model mechanistically explains the differences in reactivity for n-octane, 2-methylheptane, and 3-methylheptane in the NTC through the influence of the methyl substitution on the rates of isomerization reactions in the low-temperature chain branching pathway, that ultimately leads to ketohydroperoxide species, and the competition between low-temperature chain branching and the formation of cyclic ethers, in a chain propagating pathway.     

Combustion characteristics in a small-scale reactor with catalyst segmentation and cavities

Hydrogen–air combustion characteristics of a small-scale reactor with different catalyst layouts and configurations are experimentally and numerically investigated. Four different platinum catalyst layouts are used to investigate the effect of catalyst segmentation on combustion performance. It is found that combustion phenomena are strongly related to the variations of inflow velocity, equivalence ratio, and length of catalyst segment. The existence of hetero- and homogeneous reactions in the combustor relies on sufficient catalytically induced exothermicity as well as sufficient hydrogen in the remaining mixture. Besides, the multi-segment catalyst with cavities appreciably extends the stable operating range of catalytic combustion in a small-scale combustor for a wide range of inflow velocities. Nevertheless, gas-phase reaction can be sustained and anchored by the existence of cavity in a small-scale system. The reactor with proposed mechanisms can be applied to various small-scale power, heat generation, and propulsion systems.     

Effects of γ rays irradiation on structure and property of TiO2 thin films

TiO₂ thin films were deposited on a glass substrate by the radio frequency magnetron sputtering method, and annealed for 2 h at temperatures of 550°C. Then, ⁶⁰Co γ rays with different doses were used to irradiate the resulting TiO₂ thin films. The surface features of films before and after irradiation were observed by scanning electron microscope (SEM). Simultaneously, the crystal structure and optical properties of films before and after irradiation were studied by X-ray diffraction (XRD), UV–VIS transmission spectrum and Photoluminescence (PL) spectrum, respectively. The SEM analysis shows that the film is smooth with tiny particles on the film surface, and non-crystallization trend was clear after irradiated with γ rays. The XRD results indicated that the structure of the film at the room temperature mainly exists in the form of amorphous and mixed crystal at a sputtering power of 200 W, and non-crystallinity was more obvious after irradiation. Obvious difference can be found for the transmissibility of the irradiated and pre irradiation TiO₂ films by the UV-VIS spectra. The color becomes light yellow, and the new absorption edge also appeared at about 430 nm. PL spectra and photocatalysis experiments indicate that the photocatalysis degradation rate of the TiO₂ films on methylthionine chloride solution irradiated with the maximum dose can be increased to 90%.