Thermodynamics and kinetics of the hydride-transfer cycles for 1-aryl-1,4-dihydronicotinamide and its 1,2-dihydroisomer

Five 1-(p-substituted phenyl)-1,4-dihydronicotinamides (GPNAH-1,4-H(2)) and five 1-(p-substituted phenyl)-1,2-dihydronicotinamides (GPNAH-1,2-H(2)) were synthesized, which were used to mimic NAD(P)H coenzyme and its 1,2-dihydroisomer reductions, respectively. When the 1,4-dihydropyridine (GPNAH-1,4-H(2)) and the 1,2-dihydroisomer (GPNAH-1,2-H(2)) were treated with p-trifluoromethylbenzylidenemalononitrile (S) as a hydride acceptor, both reactions gave the same products: pyridinium derivative (GPNA(+)) and carbanion SH(-) by a hydride one-step transfer. Thermodynamic analysis on the two reactions shows that the hydride transfer from the 1,2-dihydropyridine is much more favorable than the hydride transfer from the corresponding 1,4-dihydroisomer, but the kinetic examination displays that the former reaction is remarkably slower than the latter reaction, which is mainly due to much more negative activation entropy for the former reaction. When the formed pyridinium derivative (GPNA(+)) was treated with SH(-), the major reduced product was the corresponding 1,4-dihydropyridine along with a trace of the 1,2-dihydroisomer. Thermodynamic and kinetic analyses on the hydride transfer from SH(-) to GPNA(+) all suggest that the 4-position on the pyridinium ring in GPNA(+) is much easier to accept the hydride than the 2-position, which indicates that when the 1,4-dihydropyridine is used the hydride donor to react with S, the formed pyridinium derivative GPNA(+) may return to the 1,4-dihydropyridine by a hydride transfer cycle; but when the 1,2-dihydropyridine is used as the hydride donor, the formed pyridinium derivative can not return to the 1,2-dihydropyridine by the hydride reverse transfer from SH(-) to GPNA(+). These results clearly show that the hydride-transfer cycle is favorable for the 1,4-dihydronicotinamides, but unfavorable for the corresponding 1,2-dihydroisomers.     

Loss and recovery in hydrophobicity of silicone rubber exposed to corona discharge

This paper describes the loss and recovery in the hydrophobicity of unfilled high temperature vulcanized silicone rubber (HTV-SR) resulting from corona discharge. In this study, HTV-SR specimens were exposed to corona stress generated by a parallel needle-plane electrode system, and physicochemical analyses on the surface layer of SR before and after corona discharge treatment were carried out by using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It is demonstrated that hydrophilic OH groups that are by-products of ageing can be formed instead of hydrophobic CH₃ groups on the surface of aged SR and the corona discharge plays an important role on the temporary loss of hydrophobicity. After a substantial period of ‘rest’, the hydrophobic recovery of SR results from the diffusion of low-molecular weight (LMW) silicone fluid from the bulk onto the aged layer.     

ortho-Mercuration of ferrocenylimines

The mercuration of a series of aryliminomethylferrocenes occurred predominantly in an ortho-position of the substituted ferrocenyl ring to yield 2-mercurated ferrocenylimines. The regiospecificity of this reaction suggests that the mercury is directed into the ortho-position by coordination of the mercury to imino nitrogen with subsequent electrophilic substitution. The chromatographic and spectral properties of the 2-mercurated products show the presence of an intramolecular N → Hg coordination via the five-membered ring in these molecules, which was further confirmed by the single-crystal structure analysis of 2-chloromercuro-1-[(4-methoxyphenylimino)methyl]ferrocene.     

Electron transport across the alkanethiol self-assembled monolayer/Au(111) interface: role of the chemical anchor

Alkanethiol self-assembled monolayers (SAMs) on Au(111) are model systems for molecular electronics. We probe the role of the chemisorption bond on electron dynamics at the SAM/Au interface using time-resolved two-photon photoemission. Formation of the Au-S bond is evidenced by a localized sigma resonance, which broadens and shifts upward in energy when the lying-down chemisorbed molecules stand up. The localized chemisorption bond does not affect the electronic coupling between delocalized image resonances and the metal substrate. Instead, lifetimes of image resonances are decreased due to scattering with S atoms within the thiol or thiolate monolayer.     

聚乙酸乙烯酯的溶液性质及长链支化度

用粘度法,GPC和LALLS测定了线型及不同转化率的PVAc分级级份的粘度与分子量。提出了以线型和支化聚合物的K,α计算临界分子量的方法。讨论了表征PVAc长链支化的各种参数与分子量和转化率之间的关系以及不同条件下迭代法计算的支化频率λ的差异。实验结果表明,特性粘数和数均分子量乘积所表示的流体力学体积更适合GPC的普适标定概念。     

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。     

超临界NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法对超临界NaCl水溶液的微观结构进行了研究.模拟发现在所研究超临界条件下,密度的变化比温度的变化对超临界NaCl水溶液的微观结构影响更大.温度及密度对Cl－ H2O径向分布函数的影响比对Na＋ H2O径向分布函数的影响要大.超临界条件下,各gNa＋－Cl－在0.261 nm处出现峰值,表明Na＋、Cl－之间发生了离子的缔合.超临界条件下,随温度增加,缔合作用增强；随密度增加,缔合作用减弱.本文工作为建立可适用于超临界条件下的电解质热力学模型提供了依据.     

A new two‐dimensional CdII coordination polymer constructed by pyrazine‐2,3‐dicarboxyl­ate

In the title compound, poly[μ₅‐pyrazine‐2,3‐dicarboxyl­ato‐cadmium(II)], [Cd(C₆H₂N₂O₄)]_n or [Cd(pdc)]_n, where pdc is the pyrazine‐2,3‐dicarboxyl­ate anion, the Cd^II atom is six‐coordinated by five carboxyl­ate O atoms and one N atom from five different pdc ligands in a distorted octa­hedral CdO₅N coordination geometry. Two Cd^II atoms are bridged by carboxyl­ate groups of the pdc ligands to create a dimeric unit. The dimeric units are further connected by the pdc ligands to generate an inter­esting two‐dimensional structure.     

Macromolecule encapsulation in diazoresin-based hollow polyelectrolyte microcapsules

A stable enzyme encapsulation technique based on the conversion of weak interactions between diazo resin/poly(styrene sulfonate) to covalent bonds was explored. Photosensitive diazoresin-based polyelectrolyte microcapsules were prepared via layer-by-layer electrostatic self-assembly of poly(styrene sulfonate) and diazoresin on MnCO(3) templates. UV-vis and zeta-potential measurements confirmed the alternate deposition of {PSS/DAR} multilayers on the micrometer-sized dissolvable templates. The DAR-based microcapsules were demonstrated to be permeable to enzymes prior to UV irradiation, while the permeability of the multilayer wall was changed substantially after photo-cross-linking. Encapsulated molecules were stably entrapped after UV irradiation, as shown by confocal microscopy and atomic force microscopy images. Activity assays revealed that encapsulated glucose oxidase possessed 52.8% of the catalytic activity exhibited by the same amount of free enzyme, proving the preservation of native conformation and accessibility of substrate. This encapsulation technique is promising for many biomedical and biotechnological applications, particularly enzyme biosensors, which require stable immobilization of functional components while allowing sufficient transport rates for substrate molecules.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.