Microwave-assisted extraction of quercetin and acid degradation of its glycosides in Psidium guajava leaves.

Microwave-assisted extraction (MAE) and microwave-assisted hydrolysis (MAAH) were developed for the sample preparation of guava leaves prior to GC determination of quercetin and its glycosides. Ethanol was selected as the solvent. The optimum MAE temperature, particle size, solvent volume and MAE time are 120 degrees C, 40 - 60 mesh, 20 mL and 5 min, respectively; the optimum MAAH temperature and time, HCl concentration, solvent are 100 degrees C, 5 min, 1.2 mol L(-1) HCl and ethanol, respectively.     

Concentrations of hazardous heavy metals in environmental samples collected in Xiamen, China, as determined by vapor generation non-dispersive atomic fluorescence spectrometry.

Non-dispersive atomic fluorescence spectrometry (NDAFS) coupled with vapor generation (VG) sample introduction was applied to the determination of the concentrations of hazardous heavy metals, such as arsenic, cadmium, lead and mercury, in seawater, soils and total airborne particulate matter (PM) collected around the Xiamen area in China. Almost 100% sample introduction efficiency was achieved by using thiourea and ascorbic acid for the pre-reduction of As(V) to As(III), K3Fe(CN)6 and tartaric acid for pre-oxidation of Pb(II) to Pb(IV), and masking the interferences arising from the co-existing transition metals to As, Cd, Hg and Pb during their vapor generation process. Moreover, a novel sample pretreatment device was developed to avoid the loss of mercury, lead, cadmium and arsenic during sample pretreatment. With such methods, the detection limit (DL) of arsenic, cadmium, lead and mercury was down to 0.08, 0.03, 0.05, 0.01 ng mL(-1) (3sigma), respectively. The relative standard deviations (RSD, n = 11) for arsenic, cadmium, lead and mercury at 10 ng mL(-1) were 0.9%, 1.6%, 1.3% and 2.0%, respectively. The concentrations of hazardous heavy metals in the environmental samples collected in Xiamen, China are in the range from 0.02 +/- 0.001 ng mL(-1) in seawater to 15.3 +/- 0.2 microg g(-1) in soils. Besides flame/GF-AAS and ICP-AES/MS, VG-NDAFS should be another choice for the determination of hazardous heavy metals in environmental samples.     

An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

Erds方程的全等解

本文运用初等方法给出了Erds方程的所有全等解.     

On the decomposition of Kn into complete m-partite graphs

Graham and Pollak [3] proved that n ?1 is the minimum number of edge-disjoint complete bipartite subgraphs into which the edges of K_n can be decomposed. Using a linear algebraic technique, Tverberg [2] gives a different proof of that result. We apply his technique to show that for “almost all n,” ? (n + m ?3)/(m ?1) ? is the minimum number of edge-disjoint complete m-partite subgraphs in a decomposition of K_n.     

Dependence of slow crack growth in polyethylene on butyl branch density: Morphology and theory

A theoretical equation has been developed to described the rate of slow crack growth in an ethylene-hexene copolymer in terms of the basic morphological parameters. These parameters are spacing of the butyl branches, number of tie molecules, and the thickness of the lamellar crystal. Experimentally, the thickness of the lamellae and the long period were determined as functions of the branch density. The calculation of the number of tie molecules is based on the values of the molecular weight and the long period. The model of slow crack growth is based on the rate of disentanglement of the tie molecules. The rate of disentanglement varies inversely with the number of tie molecules and directly with the number of tie molecules that are not pinned by the branches.     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

关于Rabinowitz-Crandall的一个例子

本文论述常用燃烧室的柴油机燃用纯酒精的技术可行性。以L195型柴油机采用高压喷射、火花助燃进行燃用纯酒精试验为依据,分析其主要性能和指标。从理论上探讨混合气形成、着火、功率、热效率和使用性能的特点与影响因素。     

Recursive method for ARMA model estimation (II)

In this paper a new recursive method for ARMA model estimation is given. Same as in [1], the order's estimator is strongly consistent, and the pearameter's estimaters defer to CLT and LIL under a natural condition. Compared with the previous methods suggested by Hannan & Kavalieris (1984), Wang Shouren & Chen Zhaoguo (1985) and Franke (1985), this method has some advantages: the amount of calculat on work is smaller, the minimum-phase property of coefficient estimators can be guaranteed, the BAN estimators for MA or AR model can be obtained directly, and the simulation shows that this method is more accurate in estimating the order and parameters.