Effects of pressure pulsation on oxygen transfer rate measured by sulfite method

Pressure pulsation (PP) was investigated for its effects on oxygen transfer rate (OTR) measured by sulfite oxidation. By manipulating airflow rate, 0.41–1.2 vvm, and a control valve in a 4-L bioreactor, the frequency of PP was varied at different gas pressures3–15 psig. A mathematical model of OTR was built and compared to experimental data. OTR was also examined at constant gas pressure, 4.5–15.0 psig. The results indicate a good agreement between measurement and model prediction. OTR above 9 psig during PP showed significant enhancement at 25°C. This proves that PP not only affects the elevation of DO level, but also increases the interfacial area and mass transfer coefficient.     

Synthesis,photophysical and electrochemical studies of di-2-pyridyl ketone complexes of rhodium(III)

Complexes of rhodium(III) with di-2-pyridyl ketone (dpk), Rh(dpk)(MeCN)Cl₃ (1) and cis-[Rh(dpk)₂Cl₂]⁺ (2), have been successfully prepared and characterized. At low temperature (77 K), complex (2) in EtOH/MeOH (4:1, v/v) shows a broad, symmetric and structureless red emission with a microsecond lifetime and, hence, is assigned as the dd* phosphorescence. Electrochemical data, including cyclic voltammetry, normal pulse voltammetry, triple pulse voltammetry and controlled potential electrolysis, have been obtained for the two dpk complexes of rhodium(III) in MeCN. On the basis of analysis of the electrochemical (1,2) and luminescence data (2), electron transfer mechanisms are proposed. For complex (1), two reduction processes occur at the metal-localized orbitals with elimination of chlorides during the first reduction step. This is followed by a one-electron reduction at the metal. For complex (2), three electrons are transferred to the metal in two successive reduction steps accompanied by elimination of two chlorides. After these two reduction steps another one-electron reduction occurs at the dpk ligand.     

A copper-catalyzed C-N bond formation involving sp-hybridized carbons. A direct entry to chiral ynamides via N-alkynylation of amides

A copper-catalyzed new C-N bond formation involving a sp-hybridized carbon is described here leading to a facile entry for syntheses of chiral ynamides. This direct N-alkynylation of amides should have a significant impact on the future development of synthetic methodologies employing ynamides.     

Electrophoresis in a non-Newtonian fluid: sphere in a spherical cavity

The electrophoretic behavior of a sphere in a non-Newtonian fluid is investigated theoretically by analyzing the phenomenon that occurs in a spherical cavity under the condition of a weak applied electrical field. Non-Newtonian behavior in the liquid phase may be due to, for example, the addition of polymer to a colloidal dispersion to improve its stability. It may also arise from the increase in the volume fraction of the dispersed phase such as the slurry used in chemical mechanical polishing. A Carreau model is adopted to characterize the shear-thinning behavior of the liquid phase. We show that the difference between the mobility of the particle based on the present model and that based on the corresponding Newtonian fluid increases with the decrease in the thickness of a double layer. The shear-thinning nature of the liquid phase has the effect of increasing the mobility.     

Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

In vitro anticomplementary activity and quality evaluation of dried blossoms of Inula nervosa Wall. from different geographical origins

Blossoms of Inula nervosa Wall. (BINW) are traditionally used as an analgesic and antitussive in China. In this study, in vitro anticomplementary activities of crude extract from BINW in 21 batches and of extracts of four monomeric compounds were evaluated by the classical pathway. The effect of the region of origin on the quality of BINW was evaluated by fingerprint analysis for the first time. Furthermore, chemometric methods including similarity analysis and principal component analysis were employed to evaluate the quality of BINW. The nine major monomeric compounds were quantitated by ultra‐high‐performance liquid chromatography. All nine analytes demonstrated excellent linearity with recoveries ranging from 97.25% to 102.76%. The limits of detection and quantification were 0.07–12.20 μg/mL and 0.22–40.27 μg/mL, respectively. Results indicate that different regions of origin have a significant effect on the quality of BINW. Fingerprint analysis in combination with chemometrics and multi‐ingredient determination is an efficient and reliable approach for quality evaluation. The BINW samples from Yunnan had the highest ratio of 1,5‐dicaffeoylquinic acid and thymol; they also exhibited significantly higher anticomplementary activity than those from three other areas. This study successfully established a rapid and efficient method to evaluate the quality and biological activity of BINW.     

Biomimetic Bottlebrush Polymer Coatings for Fabrication of Ultralow Fouling Surfaces

Demand for long‐lasting antifouling surfaces has steered the development of accessible, novel, biocompatible and environmentally friendly materials. Inspired by lubricin (LUB), a component of mammalian synovial fluid with excellent antifouling properties, three block polymers offering stability, efficacy, and ease of use were designed. The bottlebrush‐structured polymers adsorbed strongly on silica surfaces in less than 10 minutes by a simple drop casting or online exposure method and were extremely stable in high‐salinity solutions and across a wide pH range. Antifouling properties against proteins and bacteria were evaluated with different techniques and ultralow fouling properties demonstrated. With serum albumin and lysozyme adsorption <0.2 ng cm^?2, the polymers were 50 and 25 times more effective than LUB and known ultralow fouling coatings. The antifouling properties were also tested under MPa compression pressures by direct force measurements using surface forces apparatus. The findings suggest that these polymers are among the most robust and efficient antifouling agents currently known.