Improved space time prewhitener for linear frequency modulation reverberation using fractional Fourier transform

This letter presents an improved space time prewhitening method for linear frequency modulation (LFM) reverberation. The proposed method transforms the reverberation to fractional Fourier domain to whiten using fractional Fourier transform. The linear varying frequency in LFM reverberation is focused on a stationary frequency, and the adjacent block signal is used as the reference signal of prewhitening. Finally, experiment results with real reverberation data verify that the proposed method improves the detection performance of active sonar in shallow sea significantly.     

Preparation of nano-hydroxyapatite/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) biocomposite microspheres

Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2–3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM).     

Guajamers A-I,Rearranged Polycyclic Phloroglucinol Meroterpenoids from Psidium guajava Leaves and Their Antibacterial Activity

Main observation and conclusion Eight new polycyclic phloroglucinol meroterpenoids guajamers A-H (1-8),a methylated benzoylphloroglucinol meroterpenoid guajamer...     

Simultaneous calorimetric and optical reflectivity measurements of extremely thin liquid crystal films

Abstract

An extremely sensitive measuring system has been developed to obtain simultaneously heat capacity and optical reflectivity data from thin free-standing liquid crystal films. Results from 3(10)OBC near the smectic A to hexatic B transition will be reported and discussed in the context of recent theory regarding phase transitions in two dimensions.     

Blue laser lithography for making antireflective submicron structures on silicon

The application of blue laser lithography for creating antireflective submicron structures on a crystalline silicon substrate was evaluated. The assembled blue laser lithography system was obtained by modifying a commercial blue laser optical pickup head and consisting of a 405-nm-wavelength blue laser and a 0.85-numerical-aperture objective lens. Si substrates were patterned with submicron column patterns of various periods and aspect ratios by blue laser lithography using a sputtered Ge-Sb-Sn-O layer as a resist. The reflectance of the patterned Si substrate decreased to 3% on average in the 300–1000 nm wavelength range, with a low sensitivity to the angle of incident light. Such patterned substrates showed potential for application in crystalline Si solar cells.     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

Enantioselective Organocatalytic Aza-Michael Additions of Phthalimide Derivatives to α,β-Unsaturated Aldehydes

Phthalimide derivatives as nitrogen nucleophiles with α,β‐unsaturated aldehydes for asymmetric aza‐Michael additions have been reported. The reactions proceed smoothly to afford corresponding Michael adducts in good yields (up to 98%) and enantioselectivities (up to 95% ee).     

Hierarchical nanostructured composite cathode with carbon nanotubes as conductive scaffold for lithium-sulfur batteries

Carbon nanotubes (CNTs) are excellent scaffolds for advanced electrode materials, resulting from their intrinsic sp2 carbon hybridization, interconnected electron pathway, large aspect ratio, hierarchical porous structures, and low cost at a large-scale production. How to make full utilization of the mass produced CNTs as building blocks for nanocomposite electrodes is not well understood yet. Herein, a composite cathode containing commercial agglomerated multi-walled CNTs and S for Li-S battery was fabricated by a facile melt-diffusion strategy. The hierarchical CNT@S coaxial nanocables exhibited a discharging capacity of 1020 and 740 mAh g-1 at 0.5 and 2.0 C, respectively. A rapid capacity decay of 0.7% per cycle at the initial 10 cycles and a slow decay rate of 0.14% per cycle for the later 140 cycles were detected. Such hierarchical agglomerated CNT@S cathodes show advantages in easy fabrication, environmentally benign, low cost, excellent scalability, and good Li ion storage performance, which are extraordinary composites for high performance Li-S battery.     

Effect of long-period stacking ordered phase on thermal stability of refined grains in Mg-RE-based alloys

The refined grains in both as-cast Mg-10Y-1Zn-2Zr (WZ101?K, wt.%) and Mg-10Y-1Al (WA101, wt.%) alloys have been found to have superior thermal stability after solution treatment. Plate-shaped, but different polytypes of long-period stacking ordered (LPSO) phases distributed along grain boundaries are considered as the predominant inhibitors of grain growth. Based on the plate-shaped features of the LPSO phases, a modified Zener’s model is established and the predicted limiting grain sizes are in a good agreement with the experimental results. Therefore, this model has strong potential for designing advanced Mg-RE-based alloys with high strength and high creep resistance at high temperatures.     

Diethyl phenylphosphonite contributing to solid electrolyte interphase and cathode electrolyte interphase for lithium metal batteries

Lithium metal batteries have obtained increasing interest due to their high specific capacity.Nonetheless,the growth of lithium dendrites brings safety risks to...