Calculations on the octupolar molecules with enhanced two-photon absorption cross sections based on the Zn (II) and Cu (I) as centers

The equilibrium geometries, electronic structures, as well as one- and two-photon absorption cross sections of a series of octupolar chromophores with Zn(2+) or Cu(+) as coordinate centers and 4,4'-bis(dibutylaminostyryl)-[2,2']-bis(bipyridyl) as ligands have been determined by using B3LYP/6-31G and ZINDO methods. These molecules are designed by controlled combination of two or three bipyridyl ligands with the metal centers. The results show that Zn(2+) is an effective template for the design of octupolar structures which enable it to form tetrahedral and octahedral coordinated complexes; while Cu(+) only exists in a tetrahedral coordinated complex, comparing the tetrahedral complex with Zn(2+) as the center with that of Cu(+) as the center, it is found that the complex with the Cu(+) center is a better two-photon absorption material than the former as far as the transparency/nonlinearity is concerned. Furthermore, for the same metal center of Zn(2+), both one- and two-photon absorptions of the tetrahedral complex are redshifted relative to those of the octahedral complex, is attributed to the spiroconjugation effect in the tetrahedral complex. Our theoretical findings are consistent with recent experimental observations and provide an important foundation for the design of improved transparency-nonlinearity two-photon absorption materials.     

PA.FPNS: its synthesis and use in spectrophotometric determination of magnesium

A new polymeric chromogenic reagent PA.FPNS has been synthesized by condensing polyallylamine (PA) with 3-(4-formylphenylazo)-4,5-dihydroxynaphthalene-2,7-disulfonic acid (FPNS) and its properties studied. In alkaline media, PA.FPNS reacts with magnesium to form a water-soluble blue complex, whose absorption maximum is at 604 nm. The molar absorptivity (varepsilon) of the complex is 5.2 x 10(4)l mol(-1) cm(-1), which is four times that of the FPNS-Mg complex, and Beer's law is obeyed over the range 0-0.35 mug ml(-1) magnesium. Compared to the corresponding low-molecular-weight FPNS and other chromogenic reagents, PA.FPNS offers considerably improved sensitivity and selectivity for magnesium, which may be attributed to incorporating FPNS into a water-soluble polymer and the effect of the polymeric chain on the reaction microenvironment. Also, a simple and sensitive spectrophotometric method for the determination of magnesium has been developed and applied to water and human fluid samples with satisfactory results.     

Oligodeoxyribonucleotide analogues with bridging dimethylene sulfide,sulfoxide, and sulfone groups. Toward a second-generation model of nucleic acid structure

Short DNA analogues with bridging dimethylene sulfide, sulfoxide, and sulfone groups replacing the phosphate diesters (S-DNAs) were synthesized from building blocks prepared via two routes, both starting from D-glucose. Building blocks for RNA analogues were prepared by stereoselective introduction of nucleobase into a 2'-acylated ribose analogue. The ribose analogues were converted to deoxyribose analogues by replacement of a 3'-OH group by a thioacetyl unit, followed by photolytic deoxygenation or radical-based 2'-deoxygenation. DNA analogues joined via CH(2)(-)S-CH(2) units were prepared by S(N)2 displacement of a 6'-mesyl group on one building block using a thiolate nucleophile of another. 4,4'-Dimethoxytrityl protection and deprotection schemes were established for both the thiol and hydroxyl groups. The corresponding sulfoxide DNA analogues were obtained by oxidation with hydrogen peroxide. Sulfone DNA analogues were obtained by oxidation of the sulfide DNA with persulfate or hydrogen peroxide in the presence of a titanium silicate catalyst. The physical properties of several representative oligonucleotide analogues were examined, and interpreted in light of a "second-generation" model for DNA strand-strand recognition, a model that emphasizes the role of the polyanionic backbone in diminishing unwanted tendencies of highly functionalized molecules to form "structure" in solution. Even short sulfide-linked DNA analogues displayed association properties different from those displayed by standard DNA molecules. Complex formation observed with sulfide-linked tetramers by HPLC study in different solvents suggested that the complex is formed using hydrogen bonding. Sulfone-linked dinucleotides display Watson-Crick behavior; the tetramer, however, displayed self-structure. Self-structure and self-aggregation become more prominent as the length of the oligonucleotide analogues increases. The tendency to self-aggregate can be decreased by adding a charged sulfonate group to the 3'-end of the DNA analogue. Features of the second-generation model are important for many areas of nucleic acid chemistry, from the design of nucleic acid therapeutic agents to the search for life on other planets.     

STUDY ON THE SYNTHESIS AND PROPERTIES OF MACRORETICULAR IPN POLYACRYLAMIDE—POLY(VINYL—ETHYLENEDIAMINE)CHELATE SORBENTS

A new series of MR-IPN polyacrylamide—poly(vinyl-ethylenediamine)chelatesorbents were prepared by the reaction of ethylenediamine with MR-IPN matrixes.The newchelate sorbent showed good sorption properties for auric and platinic ions.     

Inter- and intramolecular pathways for the formation of tetrahydrofurans from beta-(Phosphatoxy)alkyl radicals. Evidence for a dissociative mechanism

beta-(Phosphatoxy)alkyl radicals generated by photolysis of Barton PTOC esters in the presence of allyl alcohol and tert-butyl mercaptan undergo nucleophilic substitution followed by 5-exo-trig radical ring closure leading to tetrahydrofurans in good yield and with high trans selectivity. beta-(Phosphatoxy)alkyl radicals obtained by intramolecular hydrogen 1,5-abstraction with an alkoxyl radical undergo nucleophilic displacement providing tetrahydrofurans. The ensemble of results, including the effects of leaving groups and substituents, strongly support a dissociative mechanism for these radical nucleophilic displacement reactions.     

Supramolecular framework adducts constructed of hexamethylenetetramine,aquated alkali metal cationic clusters,and hexacyanoferrates(II/III)

The reaction of alkali metal hexacyanoferrate(II/III) with (CH₂)₆N₄ (hexamethylenetetramine, abbreviated HMT) in an acidic medium yielded crystalline compounds of stoichiometries HK₂[Fe¹¹¹(CN)₆]·2HMT·4H₂O, H₂K₂[Fe¹¹(CN)₆]·2HMT·4H₂O, and HNa₂[Fe¹¹¹(CN)₆]· 2HMT·5H₂O. Their crystal structures are based on a packing of three molecular components: neutral and/orprotonated HMT, hexacyanoferrate, and an alkali metal ion-water cluster. The resulting three-dimensional supramolecular framework is constructed from the coordination of the alkali metal ion by aqua ligands as well as [Fe(CN)₆]{n–} and HMT units, and further stabilization is achieved by hydrogen bonding between water molecules and the noncoordinated nitrogen atoms of HMT and hexacyanoferrate.     

Homolytic C-H and N-H bond dissociation energies of strained organic compounds

High-level computations at G3, CBS-Q, and G3B3 levels were conducted, and good-quality C-H and N-H bond dissociation energies (BDEs) were obtained for a variety of saturated and unsaturated strained hydrocarbons and amines for the first time. From detailed NBO analyses, we found that the C-H BDEs of hydrocarbons are determined mainly by the hybridization of the parent compound, the hybridization of the radical, and the extent of spin delocalization of the radical. The ring strain has a significant effect on the C-H BDE because it forces the parent compound and radical to adopt certain undesirable hybridization. A structure-activity relationship equation (i.e., BDE (C-H) = 61.1-227.8 (p(parent)% - 0.75)(2) + 152.9 (p(radical)% - 1.00)(2) + 40.4 spin) was established, and it can predict the C-H BDEs of a variety of saturated and unsaturated strained hydrocarbons fairly well. For the C-H BDEs associated with the bridgehead carbons of the highly rigid strained compounds, we found that the strength of the C-H bond can also be predicted from the H-C-C bond angles of the bridgehead carbon. Finally, we found that N-H BDEs show less dependence on the ring strain than C-H BDEs.     

Molecular weight distribution studies. I. Radiation-induced polymerization of liquid α-methylstyrene

The concentration of water in purified and BaO-dried α-methylstyrene was found to be 1.1 × 10^?4M. The radiation-induced bulk polymerization of the α-methylstyrene thus prepared was studied in the temperature range of ?20°C to 35°C. The polymerization rate varied as the 0.55 power of the dose rate. The theoretical molecular weights and molecular weight distribution were calculated from a proposed kinetic scheme and these values were then compared with those found experimentally. The agreement between these two was reasonably close, and therefore it was concluded that, from the molecular weight distribution point of view, the proposed kinetic scheme for the cationic polymerization of α-methylstyrene is an acceptable one. The rate constant for chain transfer to monomer k_f changed with temperature and was found to be responsible for the decrease in the molecular weight of the polymer with increase in temperature. k_f and k_p at 20°C were found to be 0.95 × 10⁴ l./mole-sec and 0.99 × 10⁶ l./mole-sec, respectively.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.     

Synthesis and optical resolution of a series of inherently chiral calix[4]crowns with cone and partial cone conformations

A series of inherently chiral calix[4]arenes with cone and partial cone conformations and with crown ether moieties of variable size have been readily synthesized. By taking advantage of the carboxy appendage on the lower rim, these were condensed with the chiral auxiliary (S)-BINOL to form diastereomers which, in most cases, could be separated by preparative TLC, or more desirably, by column chromatography on silica gel (diastereomeric excess >99 % based on HPLC analysis). Seven enantiopure antipodes of inherently chiral calix[4]crowns were obtained after hydrolysis. It has been found that both the size of the crown moiety and alkylation of the last phenolic hydroxy group (accompanied with or without a change in the conformation) affect the separation of the diastereomers.