On the decomposition of Kn into complete m-partite graphs

Graham and Pollak [3] proved that n ?1 is the minimum number of edge-disjoint complete bipartite subgraphs into which the edges of K_n can be decomposed. Using a linear algebraic technique, Tverberg [2] gives a different proof of that result. We apply his technique to show that for “almost all n,” ? (n + m ?3)/(m ?1) ? is the minimum number of edge-disjoint complete m-partite subgraphs in a decomposition of K_n.     

Dependence of slow crack growth in polyethylene on butyl branch density: Morphology and theory

A theoretical equation has been developed to described the rate of slow crack growth in an ethylene-hexene copolymer in terms of the basic morphological parameters. These parameters are spacing of the butyl branches, number of tie molecules, and the thickness of the lamellar crystal. Experimentally, the thickness of the lamellae and the long period were determined as functions of the branch density. The calculation of the number of tie molecules is based on the values of the molecular weight and the long period. The model of slow crack growth is based on the rate of disentanglement of the tie molecules. The rate of disentanglement varies inversely with the number of tie molecules and directly with the number of tie molecules that are not pinned by the branches.     

牙齿化石中由辐照产生的陷阱电子的热稳定性研究

本文对周口店北京猿人遗址的动物牙齿化石进行了辐照产生的陷阱捕获电子的热稳定性研究和釉质样品及牙质样品的热稳定性对比实验。得到釉质样品中g=2.0016 ESR峰的寿命为7.1×10⁶年(20℃)。说明了取该峰进行ESR年代测定的可信性和用釉质样品进行ESR年代测定的必要性。     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

金催化化学发光新体系——苯并吡喃化学发光分析法测定金矿中的痕量金

本文提出了一种测定矿样中痕量金的化学发光分析法,氯化6,7-二羟基-2,4-二甲基苯并吡喃-H_2O_2化学发光体系,方法的检出限为7ppb。工作曲线线性范围是10～1000ppbAu,测定的相对标准偏差小于7％。应用本法测定矿样中的金,结果良好。     

Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

Transfer matrix approach of vibration isolation analysis of periodic composite structure

The transmission properties of elastic waves propagating in a three-dimensional composite structure embedded periodically with spherical inclusions are analyzed by the transfer matrix method in this paper. Firstly, the periodic composite structures are divided into many layers, the transfer matrix of monolayer structure is deduced by the wave equations, and the transfer matrix of the entire structure is obtained in the case of boundary conditions of displacement and stress continuity between layers. Then, the effective impedance of the structure is analyzed to calculate its reflectivity and transmissivity of vibration isolation. Finally, numerical simulation is carried out; the experiment results validate the accuracy and feasibility of the method adopted in the paper and some useful conclusions are obtained. Project (No. 50075029) supported by the National Natural Science Foundation of China.     

HIGH ACCURACY NUMERICAL METHOD OF THIN-FILM PROBLEMS IN MICROMAGNETICS

In this paper, a new high accuracy numerical method for the thin-film problems of micron and submicron size ferromagnetic elements is proposed. For the computation of stray field, we use the finite element method(FEM) by introducing a semi-discrete artificial boundary condition [1, 2]. In our numerical experiments about the domain patterns and their movement, we can see that the results are accordant to that of experiments and other numerical methods. Our method are very convenient to deal with arbitrary shape of thin films such as a polygon with high accuracy.     

Synthesis and magnetic properties of multilayer Ni/Cu and NiFe/Cu nanowires

Highly ordered composite nanowires with multilayer Ni/Cu and NiFe/Cu have been fabricated by pulsed electrodeposition into nanoporous alumina membrane. The diameter of wires can be easily varied by pore size of alumina, ranging from 30 to 100 nm. The applied potential and the duration of each potential square pulse determine the thickness of the metal layers. The nanowires have been characterized by transmission electron microscopy (TEM), magnetic force microscopy (MFM), and vibrating sample magnetometer (VSM) measurements. The MFM images indicate that every ferromagnetic layer separated by Cu layer was present as single isolated domain-like magnet. This technique has potential use in the measurement and application of magnetic nanodevices.