Addition of grignard reagents to aryl acid chlorides: an efficient synthesis of aryl ketones

[chemical reaction: see text]. Direct addition of Grignard reagents to acid chlorides in the presence of bis[2-(N,N-dimethylamino)ethyl] ether proceeds selectively to provide aryl ketones in high yields. A possible tridentate interaction between Grignard reagents and bis[2-(N,N-dimethylamino)ethyl] ether moderates the reactivity of Grignard reagents, preventing the newly formed ketones from nucleophilic addition by Grignard reagents.     

Use of the tubulin bound paclitaxel conformation for structure-based rational drug design

A new computational docking protocol has been developed and used in combination with conformational information inferred from REDOR-NMR experiments on microtubule bound 2-(p-fluorobenzoyl)paclitaxel to delineate a unique tubulin binding structure of paclitaxel. A conformationally constrained macrocyclic taxoid bearing a linker between the C-14 and C-3'N positions has been designed and synthesized to enforce this "REDOR-taxol" conformation. The novel taxoid SB-T-2053 inhibits the growth of MCF-7 and LCC-6 human breast cancer cells (wild-type and drug resistant) on the same order of magnitude as paclitaxel. Moreover, SB-T-2053 induces in vitro tubulin polymerization at least as well as paclitaxel, which directly validates our drug design process. These results open a new avenue for drug design of next generation taxoids and other microtubule-stabilizing agents based on the refined structural information of drug-tubulin complexes, in accordance with typical enzyme-inhibitor medicinal chemistry precepts.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Reactions of hydrazoic acid on TiO2 nanoparticles: an experimental and computational study

This article reports the results of a computational and experimental study on the reaction of hydrazoic acid, HN3, adsorbed on 15-20 nm TiO2 particle films. Experimentally, FTIR spectra of HN3(a) have been measured by varying HN3 dosage, UV irradiation time and surface annealing temperature. Three sharp peaks, related to v(a)(NNN) of HN3(a) and N3(a) with different configurations in the 2000-2200 cm(-1) region, and a broad band absorption, related to associated and isolated HN(a) and HO(a) adsorptions in the 3000-3800 cm(-1) region, have been detected. Computationally, molecular structures, vibrational frequencies and adsorption energies of possible adsorbates including HN3 and its derivatives, N3, N2, NH, and H, have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. On the basis of the experimental and computational results, the peak appeared at 2075 cm(-1), which increases at a faster rate with HN3 exposure time, is attributed to a stable adsorbate, N3-Ti(a), with the predicted adsorption energy, E(ads) = 13 kcal/mol. The peak at 2118 cm(-1), which survives at the highest surface temperature in the heating experiment, is attributable to the most stable adsorbate, Ti-N2N(H)-O(a) with E(ads) = 36 kcal/mol. The peak at 2170 cm(-1), which vanishes most readily in all of the aforementioned experiments, is related to less stable molecular adsorbates, end-on HN3-Ti(a) with E(ads) = 5 kcal/mol and side-on HN(N2)-Ti(a) with E(ads) = 8 kcal/mol. A potential energy diagram for the formation of various absorbates with their transition states has been established for the HN3/TiO2 system. On the basis of the predicted desorption energies, the four most stable products of the HN3 reaction on TiO2 are H-O(a), 118 kcal/mol; HN-O(a), 85 kcal/mol; Ti-N2N(H)-O(a), 36 kcal/mol; and N3-O(a), 19 kcal/mol.     

The determination of trace amounts of tin by flow-injection hydride generation atomic-absorption spectrometry with on-line ion-exchange separation and preconcentration

A hydride generation atomic-absorption spectrometric (AAS) method with flow-injection (FI), aimed at developing a practical routine assay for the determination of tin in food digests, is described. In order to modify the sample matrix and to achieve optimized and reproducible conditions for the hydride generation reaction, the analyte is initially converted into its chlorostannate-complex thereby allowing it to be separated and preconcentrated on-line on an incorporated micro-column packed with a strongly basic anion exchanger and subsequently to be eluted by diluted nitric acid under strictly controlled conditions. Optimum acidic conditions for the FI hydride generation AAS system was found to be 0.01-0.05M nitric acid. At a consumption of 2.7-ml sample volume, aspirated by time-based injection, the procedure resulted in an enrichment factor of 3.5 and yielded a detection limit of 0.08 microg/l. (3sigma) at a sampling frequency of 72/hr. The precision was 2.5% rsd at the 10 microg/l. level. Potential interferents, such as Ni(II), Co(II), Zn(II) and Fe(III) could, at a Sn level of 10 microg/l., be tolerated at an excess of 1000 times without impairing the assay, while a 100-1000-fold excess of Cu(II) decreased the signal by 10-15%. Recoveries in the range 94-102% were obtained for canned food sample digests spiked with 10 microg/l. Sn.     

Application of the slotted quartz tube in flow-injection flame atomic-absorption spectrometry

The slotted quartz has been applied to flow-injection flame atomic-absorption spectrometry (FI-FAAS) showing several important advantages. The tube life was improved by a factor of 5-6 compared to conventional continuous aspiration. Flow impact systems were found not to be necessary in the applications so that larger enhancement factors may be achieved without sacrifice in precision. For 1.0 mg/l. copper, 1.0 mg/l. lead, 0.1 mg/l. cadmium and 1.0 mg/l. gold sensitivity enhancement factors of 3.1, 5.5, 5.3 and 4.0 were obtained with precisions of 1.3%, 1.1%, 1.6% and 1.7% RSD (n = 11) respectively. Application of the slotted quartz tube FI-FAAS method to the determination of heavy metals in urine has shown improved tolerance to interfering matrices. Recoveries obtained by spiking undiluted urine samples with 0.1 mg/l. copper and lead, and 0.01 mg/l. cadmium were in the range 100-102%.     

Micranoic acids A and B: two new octanortriterpenoids from Schisandra micrantha

Two novel octanortriterpenoids, micranoic acids A (1) and B (2), along with three known compounds, kadsuric acid (3), 3beta-hydroxy-lanost-9(11),24(25)-dien-26-oic acid (4) and schizandronic acid (5), were isolated from the leaves and stems of Schisandra micrantha. The structures of 1 and 2 were determined by 1D and 2D NMR spectroscopic analysis. Micranoic acids A and B represent a new group of triterpenes in which the entire C-17 side chain has lost. This is the first report of octanortriterpenoids isolated from the family Schisandraceae.     

Molecular dynamics simulation of the structural configuration of binary colloidal monolayers

Molecular dynamics simulations of binary colloidal monolayers, i.e., monolayers consisting of mixtures of two different particle sizes, are presented. In the simulations, the colloid particles are located at an oil-water interface and interact via an effective dipole-dipole potential. In particular, the influence of the particle ratio on the configurations of the binary monolayers is investigated for two different relative interaction strengths between the particles, and the pair correlation functions corresponding to the binary monolayers are calculated. The simulations show that the binary monolayers can only form two-dimensional crystals for certain particle ratios, for example, 2:1, 6:1, etc., while, for example, for a particle ratio of 7:1 the monolayers are found to be in a disordered, glassy state. The calculations also reveal that in analogy to the Wigner lattice the configurations are very sensitive to the relative interaction strength between the particles but not to the absolute magnitude of the interaction strength, even when particle size effects are taken into account. Consequently, it is argued that a comparison between the calculated configurations and actual binary particle monolayer systems could provide useful information on the relative interaction strength between large and small particles. Possible mechanisms giving rise to disparities in the interaction strength between large and small particles are described briefly.     

Neutron activation analysis of gold and iridium in steel

A method of determination of trace gold and iridium in steel is presented. The samples were preconcentrated with an anion exchanger. The chemical recoveries were determined by an isotope tracer technique using¹⁹⁸Au and¹⁹²Ir.     

LC-ESI-MS Determination of Bilobalide and Ginkgolides in Canine Plasma

A sensitive and selective method using liquid chromatography with electrospray ionization mass spectrometric detection was developed for the quantification of bilobalide and ginkgolides in canine plasma. The analytes were extracted with diethyl ether-dichloromethane-isopropanol (6:3:1, v/v) after spiking the samples with daidzein (internal standard). The lower limit of quantification (LLOQ) of the method was 2.5 μg L⁻¹ for ginkgolide B and 10.0 μg L⁻¹ for bilabolide, ginkgolide A and ginkgolide C. The accuracy of the method was within 15% of the actual values over a wide range of plasma concentrations. The intra-day and inter-day precision was better than 15% (R.S.D.). Finally, the LC-ESI-MS method was successfully applied to study the pharmacokinetics of ginkgolides and bilabolide after administration of Ginkgo biloba extracts to dogs.