Carbon nanotube array-based biosensor

Aligned multi-wall carbon nanotubes (MWNT) grown on platinum substrate are used for the development of an amperometric biosensor. The opening and functionalization by oxidation of the nanotube array allows for the efficient immobilization of the model enzyme, glucose oxidase. The carboxylated open-ends of nanotubes are used for the immobilization of the enzymes, while the platinum substrate provides the direct transduction platform for signal monitoring. It is also shown that carbon nanotubes can play a dual role, both as immobilization matrices and as mediators, allowing for the development of a third generation of biosensor systems, with good overall analytical characteristics.     

Binary mixtures based on polycaprolactone and cellulose derivatives

Pyrolytic process has a promising potential for the environmentally friendly upgrading of lignocellulosic and plastic waste. Thermogravimetry and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) were used to get information about the reactive decomposition of PCL in binary mixtures with microcrystalline cellulose (MC) or sisal fibres (SF). Preliminary thermogravimetric investigation showed that biomass is thermally degraded at lower temperatures than PCL and this process has a predominant influence on the thermal behaviour of the mixtures. Discrepancies between the experimental and predicted TG/DTG profiles were considered as a measurement of the extent of interactions occurring on co-pyrolysis. It was found that reactivity of PCL was slightly increased in PCL-SF binary mixtures. Evolution of acidic products from cellulose and hemicelluloses decomposition may promote PCL degradation in binary mixtures with SF. It seems that the co-pyrolysis process could have potential for the environmentally friendly transformation of biocomposites.     

OSW saponins: facile synthesis toward a new type of structures with potent antitumor activities

[reaction: see text] OSW saponins, featuring a 16beta,17alpha-dihydroxycholest-22-one aglycon and an acylated beta-D-xylopyranosyl-(1-->3)-alpha-L-arabinopyranosyl residue attached to the 16-hydroxyl group, have recently been discovered from a group of lily plants, which show potent antitumor activities with a novel mechanism of action. This paper describes an aldol approach to the stereoselective construction of the 16alpha,17alpha-dihydroxycholest-22-one structure from 16alpha-hydroxy-5-androsten-17-ones and propionates. Elaboration of the aldol adducts toward OSW-1, involving installation of the isoamyl ketone side chain, inversion of the 16-hydroxyl configuration, and selective protection of the C22-oxy function, has been explored and accomplished. In particular, the present route was found convenient for the synthesis of OSW saponin analogues with a C22-ester side chain. Thus, the 23-oxa-analogue of OSW-1 (40) was prepared starting from the industrial dehydroisoandrosterone (1) in a linear eight-step sequence and in 26% overall yield. Analogues with a variety of modified side chains were prepared, via aldol condensation with propionates of varying length, thiopropionate, and acetate (for preparation of 68-75) or via aminolysis of the 22,16-lactone 26 (for preparation of the 23-N-analogues). Cross metathesis (CM) reaction was also found feasible for modification at the final stage from C22-allyl ester 70. Valuable structure-activity relationships (SAR), together with the practical synthetic approach, have thus been provided to set a new stage for further studies on this new type of antitumor structures.     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol L^?1 guanidine hydrochloride (GuHCI) or 8.0 mol L^?1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol L^t-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disulfide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with reversed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Phase behaviour and microstructures of microemulsions (I)

By the orthogonal design, the optimal formation conditions for the middle-phase microemulsions in the system dioctadecyldimethylammonium chloride (DODMAC)/ sodium dodecyl sulfate (SDS)/n-butanol/n-hep-tane/brine were obtained as follows: W_DODMAC: W_SDS = 1:4-1:5,C _π-butanol (%) = 11.0-12.0, andC _NaCl (%) = 3.25 Investigations have been made on the effects of the concentrations of NaCl and n-butanol (l.0%-14.0%), the ratios ofWDODMAC: to W_SDS, and the kinds of alcohols (n-propanol, n-butanol, and n-pentanol) on the formation, the phase behaviour, the ultralow interfacial tensions, the optimal salinity (S^*), and the length of salinity (δS). Some rules and data were worked out about the formation and characteristics of the middle-phase microemulsions. The mi-crostructures of the middle-phase microemulsions were also studied by using FT-IR, ESR, and freeze fracture electron microscopy techniques. The results from the three methods show that the microstructures of the middlephase mi-croemulsions undergo the change from O/W to bicontinuous (B.C.) and to W/O. The distribution rule of the orga-nized molecule assemblies in the middle-phase microemulsions is conducible to constructing the model of microemulsion systems, to recognizing the microstructures of the middle-phase microemulsions, and to setting forth the relationship between the microstructures and macro-properties of rnicroemulsions. Project supported by the Niltional Natural Science Foundation of China and the Chinese Postdoctoral Science Foundation.     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

Density functional theory study of the mechanism of the proline-catalyzed intermolecular aldol reaction

Transition structures associated with the C-C bond-formation step of the proline-catalyzed intermolecular aldol reaction between acetone and isobutyraldehyde have been studies using density functional theory methods at the B3LYP/6-31G** computational level. A continuum model has been selected to represent solvent effects. For this step, which is the stereocontrolling and rate-determining step, four reactive channels corresponding to the syn and anti arrangement of the active methylene of the enamine relative to the carboxylic acid group of l-proline and the re and si attack modes to both faces of the aldehyde carbonyl group have been analyzed. The B3LYP/6-31G** energies are in good agreement with experiment, allowing us to explain the origin of the catalysis and stereoselectivity for these proline-catalyzed aldol reactions. Received: 2 April 2002 / Accepted: 18 July 2002 / Published online: 11 October 2002 Acknowledgements. This work was supported by research funds provided by the Ministerio de Educación y Cultura of the Spanish Government by DGICYT (project PB98–1429). All the calculations were performed on a Cray–Silicon Graphics Origin 2000 of the Servicio de Informática de la Universidad de Valencia. We are most indebted to this center for providing us with computer capabilities. Correspondence to: L. R. Domingo e-mail: domingo@utopia.uv.es     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

A combination of modified particle swarm optimization algorithm and support vector machine for gene selection and tumor classification

In the analysis of gene expression profiles, the number of tissue samples with genes expression levels available is usually small compared with the number of genes. This can lead either to possible overfitting or even to a complete failure in analysis of microarray data. The selection of genes that are really indicative of the tissue classification concerned is becoming one of the key steps in microarray studies. In the present paper, we have combined the modified discrete particle swarm optimization (PSO) and support vector machines (SVM) for tumor classification. The modified discrete PSO is applied to select genes, while SVM is used as the classifier or the evaluator. The proposed approach is used to the microarray data of 22 normal and 40 colon tumor tissues and showed good prediction performance. It has been demonstrated that the modified PSO is a useful tool for gene selection and mining high dimension data.