量化方法研究分子结BEMP和TEMP的电子输运特性

通过结合杂化密度泛函和前线轨道理论与弹性散射格林函数方法研究了BE- MP(benzene-1,4-di-ethynyl-4-mercaptophenyl)和TEMP(thiophene-2,5-di-ethynyl-4- mercaptophenyl)两分子结的输运性质。基于杂化密度泛函方法计算两扩展分子电子结构的基础上,计算了两分子的输运性质．计算结果显示:电流增加来源于电极和分子轨道的共振;电导曲线呈现出平台特征．在此基础上从扩展分子A(Au-BEMP-Au)中间的苯环的旋转而引起电流减小的角度解释了负微分电阻现象．     

茶叶中三氯螨杀醇残留量的快速HPLC测定法

用微量化技术处理茶叶样品，样品经石油醚提取、浓硫酸磺化后，用反相液相色谱分离、测定样品处理液中的三氯杀螨醇残留量，２３４ｎｍ检测，外标法定量。测定低限为０．５ｍｇ／ｋｇ，回收率为９１．５％～９９．３％，变异系数为１．５３％～６．９２％之间。     

超临界NaCl水溶液的分子动力学模拟

采用分子动力学模拟的方法对超临界NaCl水溶液的微观结构进行了研究.模拟发现在所研究超临界条件下,密度的变化比温度的变化对超临界NaCl水溶液的微观结构影响更大.温度及密度对Cl－ H2O径向分布函数的影响比对Na＋ H2O径向分布函数的影响要大.超临界条件下,各gNa＋－Cl－在0.261 nm处出现峰值,表明Na＋、Cl－之间发生了离子的缔合.超临界条件下,随温度增加,缔合作用增强；随密度增加,缔合作用减弱.本文工作为建立可适用于超临界条件下的电解质热力学模型提供了依据.     

Rapid—In—situ Determination of Chromium （VI） in Water Using Modified Diphenylcarbazine with Citrate

In recent years, the determination of Cr (VI) has attracted great attention because of its toxicity to human, plants and animals1-5. Usually, in the industrial waste water, the concentration of Cr (VI) is relatively high and should be determined frequently. So, an accurate, quick, and convenient method for the measurement of Cr (VI) in environmental water, as well as in river, lake, sea and tap water, is of great importance. The method for determination of Cr (VI) by diphenylcarbazine …     

One-step preparation of highly monodisperse micron-size particles in organic solvents

In this communication, we report the first simple and fast one-step method for synthesizing highly monodisperse micron-size PMMA particles in organic media through dispersion polymerization in the presence of PHSA (a polyhydroxyl-stearic-acid graft PMMA copolymer) as a stabilizer. There are two significant advantages of our method over earlier methods. First, by optimizing the composition of a solvent mixture of hexane and dodecane, we were able to increase the concentration of monomer up to 50-56% and obtain unusually large (up to 10 mum in diameter) PMMA particles. Second, by strictly controlling the nucleation time, we were able to make PMMA particles with a low polydispersity of around 1%, much lower than has ever before been achieved for such large particles. We also report an unusual apparent metastable state in the nucleation stage.     

Synthesis of New Chiral C2-Symmetrical Bis(oxazoline )Compounds

New chiral C2-symmetrical bis(oxazoline)compounds bearing one isobutyl-,secbutyl-benzyl- or isopropyl-substituent at the 4-position have been prepared and characterized.     

3 D-QSAR Analysis of Agonists of nAChRs： Epibatidine Analogues

A 3 D-QSAR about nAChRs agonists epibatidine analogues was performed using theCoMFA and CoMSIA. The correlation coefficients were R2cv = 0.546, R2cv = 0.907 in CoMFA andR2cv = 0.655, R2,~ = 0.962 in CoMSIA of the final model. The prediction using the final models tothe test set was r2 = 0.675 in CoMFA and r2 = 0.462 in CoMSIA. This model will be useful in thedesign of novel compounds with high affinity.     

含羧酸配体的鼓形有机锡氧簇合物：六聚苯基锡氧3-吲哚丁酸酯的合成及晶体结构

利用Ph3SnOH和3-吲哚丁酸以1：1摩尔比反应，合成了新型含羧酸配体的鼓形 有机锡氧簇合物：六聚苯基锡氧3-吲哚西酸酯。通过元素分析、红外光谱和X射线 单晶衍射对其结构进行了表征。测试结果表明：该化合物为三斜晶系，空间群P1， a=1.1722(6),b=1.5694（8）nm，c=1.7227(9)nm，α=116.251（8）°，β=100. 854（10）°，γ=95.606（9）°，Z=1，V=2.732(3)nm^3，Dc=1.554g·cm^-3，μ =1.420mm^-1，F(000)=1276，R=0.0630，ωR=0.0762。晶体结构中，六配位的锡原 子呈畸变的八面体构型。     

二水草酸锌脱水的热分解动力学研究

提出一种多升温速率-等温法确定机理函数g(α)的新方法;并用迭代的等转化率法求出较为可靠的活化能Ea;在Ea和g(α)的基础上计算出指前因子A.用该法对二水草酸锌（ZnC2O4•2H2O）脱水反应的热分解动力学三因子进行了求算,得出Ea为87.22 kJ•mol－1, A为4.2120×108～7.2328×108 s－1;以及随机成核和随后生长型机理函数Am（Avrami-Erofeer）,其积分形式g(α)=[－ln(1－α)] 1/m和微分形式f(α)=m(1－α)•[－ln(1－α)](1－1/m),调节因子m=1.85～2.00.     

醋酸乙烯酯在硅橡胶上的辐射接枝研究

研究了不同溶剂中的醋酸乙烯酯在硅橡胶上的辐射接技状况及接枝后硅橡胶表面结构情况．结果表明：（１）在硅橡胶－乙酸乙酯－醋酸乙烯酯体系中，接枝有自加速效应；（２）适量加入对苯二酚，接枝诱导期延长，接枝速率下降，凝胶效应消失，辐射接技经验关联式为ＲＰ＝０．２７×［Ｄ］（－０．５６０）×［Ｉ］（０．４９０）×［Ｃ］（０．９２０），接核反应为扩散控制反应；（３）不同的溶剂对硅橡胶接枝有不同的影响，如甲醇发生敏化作用，提高接枝速率，而苯发生惰化作用，降低接枝速率；（４）在合适的甲醇和苯配比时，接枝反应几乎恒速进行，用扫描电镜（ＳＥＭ）观察断面，接枝区比较均一，出现微相分离．