Fabrication of patterned gold electrodes with spin-coated-and-fired Au(1 1 1) film by the soft lithography

We prepared high quality Au(1 1 1) film on Si wafer through the spin coating and thermal decomposition of a gold ink, spin-coated-and-fired (SCAF) Au film. The X-ray measurements, XRD and pole-figure analysis, showed that the SCAF Au film has a (1 1 1) out-of-plane orientation with a random in-plane orientation. In order to confirm the chemical activity of the SCAF Au film, we demonstrate the formation of patterned structures with the film by using soft lithography technique. The chemical activities of this physically stable SCAF Au film to the alkanethiols were at least equivalent those of physically deposited the Au films. The possibility of the mass production of micro patterned structure with the SCAF Au film was also demonstrated over the wide region on Si wafer by the microcontact lithography. These suggest that the Au film will help the easy fabrication of various nanosized devices on Si wafer and other substrates.     

Asymptotic Behavior on a Competition Model Arising from an Unstirred Chemostat

This paper is concerned with the unstirred chemostat model with two-species and one non-reproducingresource.The global attractivity of the positive steady-state solutions of the original system is established.Moreover,the effects of the growth rate on the unique positive equilibrium of the single population model arestudied.     

An efficient construction of period-2 bulbs in the cubic Mandelbrot set with parametric boundaries

A parametric boundary equation is established for the principal period-2 bulb in the cubic Mandelbrot set. Using its geometry, an efficient escape-time algorithm which reduces the construction time for the period-2 bulbs in the cubic Mandelbrot set is introduced and the implementation graphic results display the fascinating fractal beauty     

Quantitation of homoharringtonine in plasma by high-performance liquid chromatography with amperometric detection

A high-performance liquid chromatographic procedure was developed for the quantitation of homoharringtonine in plasma. Harringtonine was used as an internal standard, and 1 ml of sample was required. The single-step extraction with dichloromethane resulted in almost 100% recovery for homoharringtonine and harringtonine. Analysis was performed on a reversed-phase CN column with amperometric detection. Chromatography was completed in 12 min. At an oxidation potential of +1.0 V, the detection limit was 1 ng/ml at a signal-to-noise ratio of 2. The mean analytical recovery for homoharringtonine was 99.5%. The within-run precision and between-run precision were both less than 11%. The method is equally applicable for plasma or serum, and it has been demonstrated to be applicable for study of the pharmacokinetics of homoharringtonine in patients suffering from acute non-lymphocytic leukaemia.     

Biphotonic recording effect of polarization gratings based on dye-doped liquid crystal films

This study investigates a holographic recording effect of biphotonic polarization gratings (BPGs) written on dye-doped liquid crystal (DDLC) films. One linearly polarized green light (λ_G = 514.5 nm) and a polarization-modulated interference pattern formed by two mutually coherent orthogonal (±45° with respect to the polarization of the green light) polarized red lights simultaneously excite the DDLC films to generate a BPG. The formation of BPGs depends primarily on the dichroism of the dye molecules and a sequence of mechanisms: photoisomerization, anisotropic adsorption and inhibition of dye adsorption. The cis-isomer absorbance-modulated distribution associated with the red polarization-modulation pattern induces the dye adsorption-modulated pattern, in turn, yielding the permanent BPG which generates a modulated twisted nematic (TN) structure pattern in the sample. It is found that each BPG is verified to be electrically switchable and thermally erasable. The switching time is in the order of milliseconds. Additionally, the recording time to form a BPG decreases with increasing intensity of the green pump beam.     

Electrical and magnetic properties of CoFeAlO thin films

Influences of oxygen-partial pressure and annealing on the electrical and magnetic properties of CoFeAlO thin films were systematically investigated by means of resistivity, permeability, magnetization and ferromagnetic resonance (FMR) measurements. It was found that, with increasing oxygen-partial pressure or under annealing, the electrical resistivity of the film increased and the magnetic softness decreased, which is attributed to the microstructural change of the film. Interestingly, an as-deposited Co_45.30Fe_20.65Al_19.34O_14.71 film was found to exhibit an inverted hysteresis loop with negative coercivity, and this peculiar phenomenon disappeared upon effects of oxygen-partial pressure and annealing. It was also found that the as-deposited films owned a narrow FMR line width that increased with increasing oxygen-partial pressure or under annealing.     

高非线性度向量弹性函数

利用已知弹性函数级联上高非线性度多输出布尔函数的方法构造（n,m,t）弹性函数,其非线性度为2^n-1-2^n-l/2-1＋2^l/2.nlmax（n-l,m,t）,在相同条件下改进了Kurosawa的非线性度2^n-1-2^n-l/2-1.特别地,本文构造了两类具体的向量弹性函数,得到两个不同的非线性度.本文所得函数的非线性度在大多数情况下是比较好的.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Liquid phase oxidation of p-chlorotoluene to p-chlorobenzaldehyde over cobalt-doped mesoporous titania with a crystalline framework

Cobalt-doped mesoporous titania with a crystalline framework synthesized by surfactant templating method presented highly selective (99%) and reasonable conversion rate (49%) of catalytic oxidation of para-chlorotoluene to para-chlorobenzaldehyde in acetic acid using aqueous hydrogen peroxide as oxidant for the first time. Recycling of the catalyst indicates that the catalyst can be used a number of times without losing its activity to a greater extent. By contrast, cobalt-doped mesoporous titania without a crystalline structure and cobalt doped the commercial titania, Degussa P25 prepared by impregnation method with the similar concentration of cobalt were found inactive. The effects of catalyst concentration, reaction time, reaction temperature, and solvents on the performance of the catalyst were also investigated.