羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

二碘化钐作用下缺电子烯烃的还原偶联反应

室温下SmI2-HMPA-t-BuOH-THF体系能顺利地将丁烯二酸二酯还原偶联为1, 2, 3, 4-四烷氧基羰基丁烷, 同样条件下, 亚苄基氰乙酸乙酯,α-乙氧羰基肉桂酸乙酯, α-乙酰基肉桂酸乙酯和亚苄基丙二酸亚异丙酯等化合物也发生还原偶联反应得到相应的二聚体。     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

新型手性Salen双核锌配合物的分子识别研究

合成了新型手性Salen配体（H3L）及新型手性Salen双核锌配合物（主体）.通过研究主体对咪唑类客体及氨基酸酯类客体的分子识别行为,测定了这些配位反应的缔合常数.主体对咪唑类客体分子识别的缔合常数顺序为:K(Im) >K(2-MeIm) >K(2-Et-4-MeIm).主体对氨基酸酯类客体分子识别的缔合常数顺序为:K(LeuOCH3) >K(ValOCH3) >K(AlaOCH3) >K(SerOCH3),配位数均为2.主体与D、 L型氨基酸酯分子识别反应在不同温度下的缔合常数结果表明,随着温度的升高,对映选择性下降.实验发现反应体系中存在焓熵补偿关系. CD光谱的研究结果也反映了主体对不同客体识别能力的差异.     

Pyrazoles as molecular probes to study the properties of co-crystals by solid state NMR spectroscopy

Equimolar mixtures of 3,5-dimethylpyrazole (1) with four NH-imidazoles (2–5) have been studied by¹³C and ¹⁵N CPMAS NMR and by DSC. In three cases, the solid mixture behaves as the sum of the individual components [imidazole (2), 2-methylimidazole (3) and 2,4(5)-dimethylimidazole (5)]. In one case [4,5-dimethylimidazole (4)], the mixture corresponds to a new species in which the dynamic behavior of1 no longer exists.     

Study on Arc Movement in Hollow Electrode Plasma Generators with Impressed Double Magnetic Fields

In order to prolong cathode lifetime of hollow electrode plasma generators, a method of impressed double magnetic fields with an alternating frequency is presented in this paper. The alternating frequency of the double magnetic fields is an important factor that influences the erosion rate on the area between the two coils' central planes. By analyzing the arc movement in the hollow cathode with a simplified theoretical model, the spiral curve shape of the radial arc and the relationship between the optimal alternating frequency and the intensity of magnetic fields are obtained. A photoelectric method is employed to measure the arc root rotation speed in the hollow cathode, and then the optimal alternating frequency is calculated as 319 Hz for the experimental conditions. The life testing with this alternating frequency showed that the cathode lifetime could be prolonged significantly.     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.