涂敷法制作质谱场电离发射丝的方法及性能研究

本文介绍一种新的质谱场电离发射丝的制备方法——涂敷法,并研究了其制备机理及影响发射丝灵敏度的因素。此外,还对涂敷法制作的发射丝及高温活化法制作的发射丝进行了各项性能对比试验。最后,介绍了涂敷发射丝的应用效果。     

Highly efficient visible-light photocatalytic ethane oxidation into ethyl hydroperoxide as a radical reservoir

Photocatalytic ethane conversion into value-added chemicals is a great challenge especially under visible light irradiation. The production of ethyl hydroperoxide (CH₃CH₂OOH), which is a promising radical reservoir for regulating the oxidative stress in cells, is even more challenging due to its facile decomposition. Here, we demonstrated a design of a highly efficient visible-light-responsive photocatalyst, Au/WO₃, for ethane oxidation into CH₃CH₂OOH, achieving an impressive yield of 1887 μmol g_cat⁻¹ in two hours under visible light irradiation at room temperature for the first time. Furthermore, thermal energy was introduced into the photocatalytic system to increase the driving force for ethane oxidation, enhancing CH₃CH₂OOH production by six times to 11 233 μmol g_cat⁻¹ at 100 °C and achieving a significant apparent quantum efficiency of 17.9% at 450 nm. In addition, trapping active species and isotope-labeling reactants revealed the reaction pathway. These findings pave the way for scalable ethane conversion into CH₃CH₂OOH as a potential anticancer drug.

Highly efficient visible-light driven photocatalytic oxidation of ethane into ethyl hydroperoxide was realized for the first time over Au/WO₃.     

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2′-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

This study describes cyclometallation as a new metal binding mode for imine-based COFs. The iridacycle decorated COF could be used for catalytic hydrogen evolution from aqueous formate solution with high stability and high efficacy.     

A highly sensitive assay for protein with dibromochloro-arsenazo-Al(3+) using resonance light scattering technique and its application

A simple, sensitive and selective method has been developed for the determination of protein using resonance light scattering (RLS) technique. The method is based on the interaction of protein and arsenazo-DBC-Al(3+) in the pH range of 5.0-7.0, which causes a substantial enhancement of the resonance scattering signal of arsenazo-DBC-Al(3+) in the wavelength range of 300-550 nm with the maximum RLS platform at 405-420 nm. With this method, 2.50-50.00 mug ml(-1) of bovine serum albumin (BSA) and 2.50-60.00 mug ml(-1) of human serum albumin (HSA) can be determined, and the detection limits, calculated three times the standard deviation (S.D.) of six blank measurements, for BSA and HSA were 123.4 and 89.6 ng ml(-1), respectively. Moreover, the method is free from interference from many amino acids and metal ions. The method, with high sensitivity, selectivity and reproducibility, was satisfactorily applied to the determination of total protein in human serum samples. Mechanism studies indicated that arsenazo-DBC-Al(3+) could bind to BSA depending mainly on electrostatic forces, which results in enhanced RLS in the arsenazo-DBC-Al(3+)-protein system.     

High pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and CuTCNQ

The high-pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) single crystals and polycrystalline CuTCNQ are presented in this paper. TCNQ shows a phase transition at 22 kbar, a pressure higher than reported earlier. CuTCNQ undergoes a first order phase transition at 30 kbar, which is characterized by the abrupt disappearance of all the Raman bands.     

1,2,2,6,6-五甲基哌啶醇对聚丙烯光稳定作用的研究

<正> 关于受阻胺类光稳定剂的稳定作用机理,是近年来光稳定研究领域中广泛探讨的课题,我们用异辛烷溶液研究了1,2,2,6,6-五甲基哌啶醇的光稳定作用,结果已在前文报道,本工作是上述研究的继续,主要研究五甲基哌啶醇对聚丙烯膜的光稳定作用。     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

Influence of the three-dimensional heterogeneous roughness on electrokinetic transport in microchannels

Surface roughness has been considered as a passive means of enhancing species mixing in electroosmotic flow through microfluidic systems. It is highly desirable to understand the synergetic effect of three-dimensional (3D) roughness and surface heterogeneity on the electrokinetic flow through microchannels. In this study, we developed a three-dimensional finite-volume-based numerical model to simulate electroosmotic transport in a slit microchannel (formed between two parallel plates) with numerous heterogeneous prismatic roughness elements arranged symmetrically and asymmetrically on the microchannel walls. We consider that all 3D prismatic rough elements have the same surface charge or zeta potential, the substrate (the microchannel wall) surface has a different zeta potential. The results showed that the rough channel's geometry and the electroosmotic mobility ratio of the roughness elements' surface to that of the substrate, epsilon(mu), have a dramatic influence on the induced-pressure field, the electroosmotic flow patterns, and the electroosmotic flow rate in the heterogeneous rough microchannels. The associated sample-species transport presents a tidal-wave-like concentration field at the intersection between four neighboring rough elements under low epsilon(mu) values and has a concentration field similar to that of the smooth channels under high epsilon(mu) values.     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.