Comparative study of spectroscopic properties of Er^3＋／Yb^3＋-codoped tellurite glass and fibres under 980nm excitation＊

A tellurite fibre of TeO_{2}－ZnO－La_{2}O_{3}－Li_{2}O glass codoped with 20000 ppm ytterbium and 5000 ppm erbium was fabricated by the suction casting and rod-in-tube technologies. The absorption spectrum of Er^{3+}/Yb^{3+} -codoped bulk glass has been measured. From the Judd－Ofelt intensity parameters, the spontaneous emission probability and radiative lifetime τ_{rad} of Er^{3+}:{}^{4}I_{13/2}→{}^{4}I_{15/2} transition for the bulk glass have been calculated. The emission fluorescence spectra and lifetimes around 1.5μm, and subsequent upconversion fluorescence in the range of 500－700nm were measured in fibres and compared with those in bulk glass. The changes in amplified spontaneous emission with fibre length and pumping power was also measured. It was found that the emission spectrum from erbium in fibres is almost twice as broad as the corresponding spectrum in bulk glass when pumped at 980nm.     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.     

Tomographic analysis of the central magnetohydrodynamic oscillations on the HT-7 tokamak

Multi-channel soft x-ray (SX) detectors are applied to generate images of magnetohydrodynamic (MHD) oscillation on the HT-7 tokamak, and the data from SX cameras are analysed by using the Fourier--Bessel harmonic reconstruction method and the singular value decomposition. The image reconstruction of SX emissivity is obtained on the assumption of plasma rigid rotation. One of the important phenomena in the HT-7 discharge is the transition from the sawtooth oscillations to the MHD oscillations when the plasma density grows higher. The MHD structure observed in the SX tomography is featured as follows: the magnetic surface of MHD structure is made up of the crescent-shaped ``hot core' and the circular ``cold bubble'. The structure of the magnetic surface is relatively stable. It rotates in the direction of the electron diamagnetic drift at a frequency being the oscillation frequency of the MHD oscillations.     

Charge coupled devices （CCD） photometry and long-term optical variability of gamma-ray-loud BL Lacertae object Mkn 421

Evidence for the long-term optical curve variability and colour behaviour of the BL Lac object Mkn 421 is presented. Our results show that the amplitude of the optical variations of Mkn 421 is only about {\Delta} B=4.7 magnitude in the B-band for its photometric history from 1899 to 2002. The results of optical photometric monitoring of the Mkn 421 from April 2000 to Jan 2002 are provided. During our observation, Mkn 421 shows significant rapid variations and exhibits short time variability of 2.42 hours in the B band. A strong correlation between the B-V colour index and the magnitude in the B band is found. Our charge coupled device (CCD) photometry of Mkn 421 shows that the measured results are in good agreement with the predicted optical variability period of about 23 years.     

气溶胶单粒子粒径的实时测量方法研究

介绍了近期研制的一台实时测量大气气溶胶单粒子粒径和化学成分的仪器在如何测量气溶胶单粒子粒径方面的测量原理及特点，并结合激光解吸附电离飞行时间质谱技术，利用该仪器对木屑燃烧产生的烟气气溶胶粒子的实时测量结果. 关键词： 气溶胶粒子 空气动力学粒径测量方法 激光解吸附电离 飞行时间质谱     

原子力显微术轻敲模式中探针样品接触过程及相位衬度研究

借助简单的有阻尼受迫振子模型，研究了原子力显微术轻敲模式中探针与样品接触时间t_c、样品的表面形变D_z和相位衬度对探针设置高度z_c及样品杨氏模量E_s的依赖关系.结果发现,t_c与D_z均随E_s及z_c的增大而减小，同时探针与样品作用过程伴随很小的能量耗散.对轻敲过程中相移量φ的研究表明，E_s较大的样品有较小的φ，且φ随 关键词： 原子力显微术 轻敲模式 相位衬度     

Entangled atomic state generation via adiabatic evolution of dark eigenstates in cavity QED

We propose a scheme for generating a two-atom entangled state and an N-atom W state using adiabatic evolution of dark eigenstates in cavity QED. The time required to complete the process does not need precise control. Since the cavity modes are never excited during the operations by engineering adiabatic evolution and controlling the atom–cavity couplings, the decoherence of the cavity decay can be suppressed.     

CO2 laser beam modulating for surface texturing machining

Laser texturing is a novel technique that may be used to texture a cold roller in the process of manufacturing high quality steel sheets. With the aim of improving the quality of the textured roller by using a CO₂ laser, a new laser beam modulating device is proposed. An optical beam expander with a fast rotating chopper system is designed. The laser pulse is split into two parts by the chopper blades; one is the preheating pulse that is reflected onto optical loop mirrors; the other is the directly transmitted pulse that creates the craters at the preheated spots. The preheating beam focus spot size and position can be adjusted. The focusing characteristics and optical parameter compensation for the flying optics are investigated. The heat transfer and melt process of laser texturing are numerically simulated. The effects of the double pulses on the texturing are analyzed. The effect of preheating the sample ahead of the laser texturing pulse is examined. The surface profile and bump hardness show improvements by using this approach.     

Optical transmission resonances tuned by external static magnetic field in an n-doped semiconductor grating with subwavelength slits

Transmission behavior of light through a grating consisting of n-doped semiconductor with subwavelength slits under the application of external static magnetic fields is investigated. As dielectric constant of n-doped semiconductor can be substantially altered by applied magnetic field, in the Voigt configuration and for TM-polarized illumination, two transmission resonance peaks associated with localized waveguide modes of slits are significantly shifted toward the lower frequency regime with the increase of the applied magnetic field. These characteristics can be assigned to a reduction of effective plasma frequency of n-doped semiconductor under the applied magnetic field. Our findings may provide possibility for achieving tunable transmission resonance spectrum.     

The structural and optical properties of ZnO/Si thin films by RTA treatments

ZnO/Si thin films were prepared by rf magnetron sputtering method and some of the samples were treated by rapid thermal annealing (RTA) process at different temperatures ranging from 400 to 800 °C. The effects of RTA treatment on the structural properties were studied by using X-ray diffraction and atomic force microscopy while optical properties were studied by the photoluminescence measurements. It is observed that the ZnO film annealed at 600 °C reveals the strongest UV emission intensity and narrowest full width at half maximum among the temperature ranges studied. The enhanced UV emission from the film annealed at 600 °C is attributed to the improved crystalline quality of ZnO film due to the effective relaxation of residual compressive stress and achieving maximum grain size.