Evaluating dredging and offshore loading locations for U.S. coal exports using the local logistics system

The formulation and use of a mixed integer mathematical programming location-allocation model, the Coal Logistics System (COLS), is presented in this study. COLS is used to evaluate the potential for reducing water-borne coal transportation costs, and concomitantly the costs of delivering coal to European markets. This cost reduction is accomplished through the use of supercolliers which would require the dredging of channels at selected ports or the use of offshore loading sites at East and Gulf Coast ports or both. The model developed and the analysis presented in this paper are intended to aid in the determination of the location and extent of these activities, and to indicate the size of the potential reduction in the costs of U.S. export coal. In order to be able to accommodate these deeper draft vessels at East and Gulf Coast ports, expensive improvements would need to be undertaken which may include the deepening of harbor channels to the depths required for 120 000 dead weight ton (dwt) or larger supercolliers. Since dredging requires large initial investments and has significant long-term maintenance costs, excess capacity could represent an inefficient use of both U.S. revenues and the ports' own funds. The use of offshore loading moorings to permit the topping off of supercolliers by self-unloading colliers at the deepwater sections of harbor channels has been proposed as a way of reducing trans-ocean transportation costs and avoiding the large investments and time delays associated with dredging activities. The Coal Logistics System was modified and extended to enable the evaluation of these two port improvement options to be undertaken in a consistent and realistic manner.     

The general three-vertex,BRS identities and renormalizability of the light-cone gauge

The general one-loop three-vertexГ _μeλ ^abc (p, q, r) in the four-component formulation of the Yang-Mills theory is calculated in the light-cone gauge. The nonvanishing counter Lagrangian constructed from this three-vertex and the self-energy is proportional to the original Lagrangian, the single renormalization constant being -11g² C _YM Г(2?ω)/48π². Gauge dependent and nonlocal counterterms do not contribute to the renormalization constant, but are needed to verify the appropriate Slavnov-Taylor (ST) and Becchi-Rouet-Stora (BRS) identities.     

Shortening of travelling-wave-amplified spontaneous emission by a transversal pumping scheme

An experimental investigation on shortening of travelling-wave ASE employing a transversal pumping is presented. A N₂ laser with =337.1 nm, pulsewidth: 700 ps is used as a pump source. An ASE pulse with duration of 45, 55 and 45 ps from dye solution of Rh 6G, Rh B and C311, respectively, is obtained. Pulse shapes of output signals generated from these solutions in three different pumping schemes are compared.     

Phase Diagram and Properties of Glasses of the System Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-AgI

The phase diagram of the system Sb₂S₃-AgI was constructed from data of the differential thermal and X-ray phase analyses. The physicochemical properties of glassy and crystalline alloys were studied.     

Synthesis and Characterization of Tetraosmium Carbonyl Complexes Containing a Bridging CO2 Ligand

Treatment of (thd)H (thd=2,2,6,6-tetramethyl-3,5-heptandionate) with excess Os₃(CO)₁₂ in an autoclave at 180°C gives the formation of a brown metal chain complex [Os₂(CO)₅(thd)₂]₂ (1) and a yellow CO₂ cluster complex [Os₄(-H)(-CO₂)(thd)(CO)₁₃] (2) in low yields. Complex 2 was fully identified by a combination of spectroscopic methods and X-ray diffraction study, showing a unique CO₂ ligand bridging a triosmium metal fragment, Os₃(-H)(CO)₁₀ and a monometallic osmium fragment, Os(CO)₃(thd). Upon treatment of 1 with Me₃NO at an elevated temperature, oxidation of the CO ligand occurred at the position trans to the unique CO₂ ligand on the Os(CO)₃(thd) fragment, giving the formation of a second CO₂ cluster [Os₄(-H)(-CO₂)(thd)(CO)₁₂(NCMe)] (3), which is stabilized by a weakly coordinated acetonitrile molecule.     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.