Star-shaped mesogens of triazine-based dendrons and dendrimers as unconventional columnar liquid crystals

Dendrons Gn-Cl and Gn-NH (n = 2-4) and novel dendrimers Gn-N approximately N-Gn (n = 2-4) based on triazine and piperazine units were efficiently prepared in good yields without employing the protection and deprotection processes and are fully characterized by 1H NMR and 13C NMR spectroscopies, elemental analysis, and mass spectroscopy. These compounds are transparent and possess good thermal stability. G4-Cl shows a monotropic columnar phase in a narrow range with a coexisting crystalline phase. Dendron G4-NH shows a rectangular column-phase, and dendrimer G4-N approximately N-G4 exhibits a monotropic hexagonal columnar phase. These identifications were supported by the polarizing optical scope and powder XRD studies.     

13C‐Isotope Labeled Surrogate for Estimating Organophosphorus Pesticides in Agricultural Products by Gas Chromatography‐Mass Spectrometry

¹³C‐isotope labeled paraoxon‐ethyl (¹³C₂‐EP) and deuterium‐labeled paraoxon‐methyl (D₆‐MP) were synthesized and employed as the surrogate (SS) and the internal standard (IS) in organophosphorus pesticides (OPs) spiking agricultural QC samples. The residual amounts of OPs were determined with gas chromatography‐mass spectrometry (GC‐MS) method. The isotope‐labeled compounds used in this study could assist the analysts to estimate the appropriateness and the uncertainties produced by pre‐treatment process. It was found that these isotope labeled compounds could improve the accuracy (10% to 40% of quantitative analysis), and provide efficacious calibration for the spiking recoveries of OPs in some agricultural samples.     

The Excitation Spectra of Naphthalene Dimers: Frenkel and Charge‐transfer Excitons

Vertical electronic excitation energies have been calculated at the second‐order approximate coupled‐cluster (CC2) level for a series of dimeric naphthalene systems. The calculated excitation energies are compared with values obtained for a single naphthalene molecule and provide information about the coupling between the naphthalene moieties in the dimers. The calculations show that the coupling between the naphthalenes depends on the distance and the energy of the exciton. At long distances and high energies the excitons on the two naphthalenes are strongly coupled, whereas the excitation energies of the few lowest states are almost unaffected by the presence of the neighboring molecules. We have also analyzed the composition of the dimeric states that consist of the individual monomer states, to investigate the charge‐transfer (CT) and the Frenkel character of the excitons. Our results indicate that the CT exciton exists at short distances, and that its population drops as the distance between the two naphthalene increases.     

Mass spectral studies of 1-(2-chloroethoxy)-2-[(2-chloroethyl)thio]ethane and related compounds using gas chromatography–mass spectrometry (GC-MS) and gas chromatography–triple quad mass spectrometry (GC-QQQ)

The electron impact and collision-ion-dissociation mass spectra of 1-(2-chloroethoxy)-2-[(2-chloroethyl) thio]ethane (1) and 10 related molecules were obtained using gas chromatography–mass spectrometry and gas chromatography–triple quad mass spectrometry. These mass spectral studies were performed to facilitate the development of a spectral database of mustard-related compounds for verification purposes of the Chemical Weapons Convention. The proposed fragmentation pathways of each individual molecule (1–11) are reported along with rationalizations for the most characteristic ions.     

Two-dimensional densely packed DNA nanostructure derived from DNA complexation with a low-generation poly(amidoamine) dendrimer

One of the keys for using deoxyribonucleic acid (DNA) as a nanomaterial relies on how the individual DNA chain can be aligned and how a multitude of DNA chains can be packed into ordered nanostructures. Here we present a simple method for constructing a 2-D densely packed DNA nanostructure using the electrostatic complex of DNA with a poly(amidoamine) (PAMAM) dendrimer of generation two. Ordered DNA arrays are formed by drop-casting an aqueous solution containing positively overcharged complexes onto mica followed by a prolonged incubation. During the incubation, the complexes tend to adsorb onto the negatively charged mica surface through electrostatic attraction. The rodlike complexes organize to form ordered arrays to increase the surface density of the adsorbed complexes and hence the attractive free energy of adsorption. The densely packed nanostructure obtained here is distinguished from the previously reported spheroid or toroid structure derived from DNA complexations with the higher-generation dendrimers.     

Application of microcontact printing to electroless plating for the fabrication of microscale silver patterns on glass

Microcontact printing (microCP) and electroless plating are combined to produce microscale patterns of silver on glass substrates. Silver patterns with feature sizes of 0.6-10 microm stripes are fabricated using two methods. (1) The printing seeding layer (PSL) method is to apply microCP to directly print the catalyst Sn pattern for further electroless plating. (2) The printing masking layer (PML) method is to use microCP to print the octadecyltrichlorosilane (OTS) self-assembled monolayer as a masking layer on glass substrates, which then become Sn-activated in the unstamped regions by immersing the substrates in stannous chloride solution. After the electroless silver plating, the PML method has a better selectivity of silver deposition than the PSL method. In addition, variation of the deposited silver thickness as a function of the plating time and temperature is discussed.     

Rapid screening assay of trimethylaminuria in urine with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Trimethyamine (TMA) and trimethylamine N-oxide (TMAO) are the most important urine parameters for diagnosing and monitoring trimethylaminuria. A rapid, simple, and specific method based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was developed to determine the presence of TMA and TMAO in urine samples from patients with trimethylaminuria. Formation of the quaternary tetramethylamino iodide by derivatization of TMA with methyl iodide allows measurement of TMA by MALDI-TOFMS. The method is repeatable and reproducible, with coefficients of variance (CVs)<3%. This new method was used for direct determination of TMA and TMAO in urine specimens obtained from normal children and patients. The proposed method allows for rapid and reliable measurements of TMA and TMAO in urine specimens from patients affected by trimethylaminuria.     

Deliberate design of a 3D homochiral Cu(II)/l-met/Ag(I) coordination network based on the distinct soft-hard recognition principle

A homochiral amino acid coordination network [{Ag3Cu3(l-methioninato)6(NO3)3(H2O)3}.7H2O]n, self-assembled from CuII, AgI, and l-methionine via a distinct soft-hard recognition process, shows interesting characteristics, in that it is constructed from 1D helical building blocks and contains homochiral channels in which 1D water chains are hosted. This result provides an effective and controllable strategy for the preparation of enantiopure heterometallic supramolecular structures that are relevant to biopolymers.     

Sol-gel synthesis and morphological control of nanocrystalline TiO(2) via urea treatment

Nanocrystalline TiO(2) rods and hollow tubes with an engraved pattern on the surface have been prepared by a novel anionic template-assisted sol-gel synthesis via urea treatment and under hydrothermal condition. X-ray diffractometry (XRD) results indicate that these nanocrystallines consist predominantly of anatase TiO(2), with minor amounts of rutile and brookite. Scanning and transmission electron microscopy (SEM and TEM) analyses reveal these rods and hollow tubes may result from the aggregates of nanorods of approximately 10 nm in diameter. The crystallographic faceting found from TEM further reveals the polymorphic nature of the nanocrystalline TiO(2) thus prepared. A "reverse micelle" formation mechanism taking into account the hydrothermal temperature, the pH effect of the sol-gel system, the isoelectric point, the formation of micelles, and the electrostatic interaction between the anionic surfactant and the growing TiO(2) particulates is proposed to illustrate the competition between the physical micelle assembly of the ionic surfactants and the chemical hydrolysis and condensation reactions of the Ti precursors.     

Effect of charged boundary on electrophoresis: Sphere in spherical cavity at arbitrary potential and double-layer thickness

The boundary effect on electrophoresis is investigated by considering a spherical particle at an arbitrary position in a spherical cavity. Our previous analysis is extended to the case where the effect of double-layer polarization can be significant. Also, the effect of a charged boundary, which yields an electroosmotic flow and a pressure gradient, thereby making the problem under consideration more complicated, is investigated. The influences of the level of the surface potential, the thickness of double layer, the relative size of a sphere, and its position in a cavity on the electrophoretic behavior of the sphere are discussed. Some results that are of practical significance are observed. For example, if a positively charged sphere is placed in an uncharged cavity, its mobility may have a local minimum as the thickness of the double layer varies. If an uncharged sphere is placed in a positively charged cavity, the mobility may have a local minimum as the position of the sphere varies. Also, if the size of a sphere is fixed, its mobility may have a local minimum as the size of a cavity varies. These provide useful information for the design of an electrophoresis apparatus.