Energy transfer of highly vibrationally excited 2-methylnaphthalene: Methylation effects

The methylation effects in the energy transfer between Kr atoms and highly vibrationally excited 2-methylnaphthalene in the triplet state were investigated using crossed-beam/time-sliced velocity-map ion imaging at a translational collision energy of approximately 520 cm(-1). Comparison of the energy transfer between naphthalene and 2-methylnaphthalene shows that the difference in total collisional cross section and the difference in energy transfer probability density functions are small. The ratio of the total cross sections is sigma(naphthalene): sigma(methylnaphthalene)=1.08+/-0.05:1. The energy transfer probability density function shows that naphthalene has a little larger probability at small T-->VR energy transfer, DeltaE(u)<300 cm(-1), and 2-methylnaphthalene has a little larger probability at large V-->T energy transfer, -800 cm(-1)相似文献   

Elucidation of the double-bond position of long-chain unsaturated fatty acids by multiple-stage linear ion-trap mass spectrometry with electrospray ionization

Linear ion-trap (LIT) MS2 mass spectrometric approach toward locating the position of double bond(s) of unsaturated long-chain fatty acids and toward discerning among isomeric unsaturated fatty acids as dilithiated adduct ([M-H+2Li]+) ions are described in this report. Upon resonance excitation in a LIT instrument, charge-remote fragmentation that involves beta-cleavage with gamma-H shift (McLafferty rearrangement) is the predominant fragmentation pathway seen for the [M-H+2Li]+ ions of monoenoic long-chain fatty acids. The fragmentation process results in a dilithiated product ion of terminally unsaturated fatty acid, which undergoes consecutive McLafferty rearrangement to eliminate a propylene residue, and gives rise to another dilithiated adduct ion of terminally unsaturated fatty acid. In addition to the above-cited fragmentation process, the [M-H+2Li]+ ions of homoconjugated dienoic long-chain fatty acids also undergo alpha-cleavage(s) with shift of the allylic hydrogen situated between the homoconjugated double bonds to the unsaturated site. These fragmentation pathways lead to two types of CC bond cleavages that are allylic (alpha-cleavage) or vinylic, respectively, to the proximal CC double bond, resulting in two distinct sets of ion series, in which each ion series is separated by a CH2CHCH (40 Da) residue. These latter fragmentations are the predominant processes seen for the polyunsaturated long-chain fatty acids. The spectrum feature dependent on the position of unsaturated double bond(s) affords unambiguous assignment of the position of double bond(s) of long-chain unsaturated fatty acids.     

Anionic Roussin's red esters (RREs) syn-/anti-[Fe(mu-SEt)(NO)2]2(-): the critical role of thiolate ligands in regulating the transformation of RREs into dinitrosyl iron complexes and the anionic RREs

The anionic syn-/ anti-[Fe(mu-SEt)(NO) 2] 2 (-) ( 2a) were synthesized and characterized by IR, UV-vis, EPR, and X-ray diffraction. The geometry of the [Fe(mu-S) 2Fe] core is rearranged in going from [{Fe(NO) 2} (9)-{Fe(NO) 2} (9)] Roussin's red ester [Fe(mu-SEt)(NO) 2] 2 ( 1a) (Fe...Fe distance of 2.7080(5) A) to the [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] complex 2a (Fe...Fe distance of 2.8413(6) A) to minimize the degree of Fe...Fe interaction to stabilize complex 2a. On the basis of X-ray absorption (Fe K- and L-edge), EPR and SQUID, complex 2a is best described as the anionic [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] Roussin's red ester with the fully delocalized mixed-valence core. The complete bridged-thiolate cleavage yielded DNIC [(EtS) 2Fe(NO) 2] (-) ( 3a) in the reaction of 2 equiv of [EtS] (-) and complex 1a, whereas reaction of 2 equiv of [(t)BuS] (-) with [Fe(micro-S (t)Bu)(NO) 2] 2 (1b) gave DNIC [((t)BuS) 2Fe(NO) 2] (-) (3b) and the anionic Roussin's red ester [Fe(mu-S (t)Bu)(NO) 2] 2 (-) (2b) through bridged-thiolate cleavage in combination with reduction. In contrast to the inertness of DNIC 3b toward complex 1b, nucleophile DNIC 3a induces the reduction of complex 1a to produce the anionic Roussin's red ester 2a. Interestingly, dissolution of complex 3a in MeOH at 298 K finally led to the formation of a mixture of complexes 2a and 3a, in contrast to the dynamic equilibrium of complexes 3b and 1b observed in dissolution of complex 3b in MeOH. These results illustrate the aspect of how the steric structures of nucleophiles ([EtS] (-) vs [ (t)BuS] (-) and [(EtS) 2Fe(NO)2](-) vs [((t)BuS) 2Fe(NO)2] (-)) function to determine the reaction products.     

Spin-lattice relaxation and a fast T1-map acquisition method in MRI with transient-state magnetization

The magnetization under the spin-lattice relaxation and the nuclear magnetic resonance radiofrequency (RF) pulses is calculated for a signal RF pulse train and for a sequence of multiple RF pulse-trains. It is assumed that the transverse magnetization is zero when each RF pulse is applied. The result expressions can be grouped into two terms: a decay term, which is proportional to the initial magnetization M0, and a recovery term, which has no M0 dependence but strongly depends on the spin-lattice relaxation and the equilibrium magnetization Meq. In magnetic resonance pulse sequences using magnetization in transient state, the recovery term produces artifacts and can seriously degrade the function of the preparation sequence for slice selection, contrast weighting, phase encoding, etc. This work shows that the detrimental effect can be removed by signal averaging in an eliminative fashion. A novel fast data acquisition method for constructing the spin-lattice relaxation (T1) map is introduced. The method has two features: (i) By using eliminative averaging, the curve to fit the T1 value is a decay exponential function rather than a recovery one as in conventional techniques; therefore, the measurement of Meq is not required and the result is less susceptible to the accuracy of the inversion RF pulse. (ii) The decay exponential curve is sampled by using a sequence of multiple pulse-trains. An image is reconstructed from each train and represents a sample point of the curve. Hence a single imaging sequence can yield multiple sample points needed for fitting the T1 value in contrast to conventional techniques that require repeating the imaging sequence for various delay values but obtain only one sample point from each repetition.     

Effects of SDS on the thermo- and pH-sensitive structural changes of the poly(acrylic acid)-based copolymer containing both poly(N-isopropylacrylamide) and monomethoxy poly(ethylene glycol) grafts in water

The effects of SDS on the structural changes of the thermally induced polymeric micelles from a graft copolymer comprising poly(acrylic acid) (PAAc) as the backbone and poly(N-isopropylacrylamide) (PNIPAAm) and monomethoxy poly(ethylene glycol) (mPEG) as the grafts in aqueous solution are studied. At low temperature, SDS micelles form via the hydrophobic association of SDS molecules with the PNIPAAm grafts at a critical aggregation concentration of SDS (cac(SDS)) much lower than its critical micelle concentration. Consequently, the critical aggregation temperature of the graft copolymer is elevated. The corresponding structure of the thermally induced polymeric micelles is characterized by an abrupt reduction in the particle size and an increased tendency toward formation of the monocore structure with a more compact and hydrophobic PNIPAAm microdomain being developed. On the other hand, upon the polymeric micelle formation at high temperature, the copolymer-bound SDS micelle structure is disrupted and the dissociated SDS molecules migrate to the core-shell interface with their alkyl chains residing in the liquidlike region of the hydrophobic PNIPAAm microdomain. The correlation between the polymeric particles and copolymer-bound micelles is further substantiated by showing the change of the colloidal particle size in response to changes in cac(SDS) via adjusting the pH of the aqueous copolymer/SDS solutions.     

Preparation of 4(3H)-quinazolinones from aryldiazonium salt,nitriles and 2-aminobenzoate via a cascade annulation

One-pot synthesis of 3-aryl-4(3H)-quinazolinones has been realized through a cascade annulation. Reaction of aryldiazonium salt with a nitrile provides in situ generation of a reactive nitrilium ion, which is attacked by the amino group of 2-aminobenzoate followed by cyclization to deliver the desired product. This strategy offers a convenient and easy access to a wide range of functionalized quinazolinone.     

Identification of odor signature chemicals in cocaine using solid-phase microextraction-gas chromatography and detector-dog response to isolated compounds spiked on U.S. paper currency

Solid-phase microextraction (SPME) combined with gas chromatography (GC) is optimized and applied to the analysis of street-cocaine samples followed by the field-testing of isolated chemicals using certified detector dogs. SPME proves to be a very sensitive and rapid method for isolating odor chemicals from street-cocaine samples. SPME-GC and activated charcoal strip (ACS)-SPME-GC signature profile methods are developed for the detection and quantitation of cocaine-odor chemicals, including the optimization of controllable variables such as fiber chemistry, extraction time, and desorption time. The volatile odor chemicals in representative illicit cocaine samples are identified and quantitated by the ACS-SPME-GC signature profile method and direct injection. Field tests with drug detector dogs show methyl benzoate to be the dominant signature odor chemical along with cocaine on U.S. currency at a threshold level of approximately 1-10 microg when spiked or when 10 ng/s methyl benzoate is diffused from polymer bottles, which is required in order to initiate an alert. No other substance studied initiated consistent responses by the drug dogs. The results indicate that the microgram levels of cocaine that have been reported on circulated U.S. currency are insufficient to signal an alert from law-enforcement trained drug detector dogs.     

Determination of Pd,Rh, Pt,Au in road dust by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g⁻¹ for Pd, Rh, Pt and Au, respectively, in original dust samples.     

Recent trends in nanomaterial-based microanalytical systems for the speciation of trace elements: A critical review

Trace element speciation in biomedical and environmental science has gained increasing attention over the past decade as researchers have begun to realize its importance in toxicological studies. Several nanomaterials, including titanium dioxide nanoparticles (nano-TiO₂), carbon nanotubes (CNTs), and magnetic nanoparticles (MNPs), have been used as sorbents to separate and preconcentrate trace element species prior to detection through mass spectrometry or optical spectroscopy. Recently, these nanomaterial-based speciation techniques have been integrated with microfluidics to minimize sample and reagent consumption and simplify analyses. This review provides a critical look into the present state and recent applications of nanomaterial-based microanalytical systems in the speciation of trace elements. The adsorption and preconcentration efficiencies, sample volume requirements, and detection limits of these nanomaterial-based speciation techniques are detailed, and their applications in environmental and biological analyses are discussed. Current perspectives and future trends into the increasing use of nanomaterial-based microfluidic techniques for trace element speciation are highlighted.