Ultrafast motion of liquids C2H4Cl2 and C2H4Br2 studied with a femtosecond laser

Transient optical Kerr effect of liquids C₂H₄Cl₂ and C₂H₄Br₂ is investigated, for the first time to our knowledge, with a femtosecond (fs) probe laser delayed with respect to a coherent fs pump laser. Coherent coupling and electronic Kerr signals are observed around zero delay when pump and probe overlap. Persisting after the pump-probe overlap are Kerr signals arising from the torsional and other intramolecular vibrations of the trans and gauche conformations; Kerr signals arising from the intermolecular motion are also observed. Vibrational quantum interference is only observed in liquid C₂H₄Br₂ and the related beats data are fitted with the torsional vibrations, 91 cm⁻¹ (gauche) and 132 cm⁻¹ (trans), and the CCBr angle-bending vibrations, 231 cm⁻¹ (gauche) and 190 cm⁻¹ (trans), with dephasing times, 0.45 ps, 0.45 ps, 2 ps, and 1.5 ps, respectively. These vibrational frequencies agree with those obtained in the frequency-domain. That no vibrational mode is observed for C₂H₄Cl₂ might be attributed to ineffective Raman-pumping. Kerr signals observed after the pump-probe overlap are Fourier transformed to give the spectra of the intermolecular motion and the vibrational spectrum, which agrees with the one observed in the infrared absorption and/or Raman scattering heretofore.     

Very high coercivities of top-layer diffusion Au/FePt thin films

The Au/FePt samples were prepared by depositing a gold cap layer at room temperature onto a fully ordered FePt layer, followed by an annealing at 800 °C for the purpose of interlayer diffusion. After the deposition of the gold layer and the high-temperature annealing, the gold atoms do not dissolve into the FePt Ll₀ lattice. Compared with the continuous FePt film, the TEM photos of the bilayer Au(60 nm)/FePt(60 nm) show a granular structure with FePt particles embedded in Au matrix. The coercivity of Au(60 nm)/FePt(60 nm) sample is 23.5 kOe, which is 85% larger than that of the FePt film without Au top layer. The enhancement in coercivity can be attributed to the formation of isolated structure of FePt ordered phase.     

转动分辨的H2+ (X2Σ+g , v+=0-18)真空紫外脉冲场电离光电子谱

测量了氢气离子转动分辨的真空紫外脉冲场电离光电子谱．涵盖了15.30?18.09 eV能量范围内的H2+(X2§+g , v+=0?18,N+=0?5)?H2(X1§+g , v00=0, J00=0?4)的电离跃迁． 通过基于Buckingham-Orr-Sichel(BOS)模型的光谱拟合和对氢气离子振动带H2+(X2§+g ,v+=0?18)的转动光谱的分析, 发现实验上只观察到对应于￠N=N+-J00=0,§2的转动跃迁． 振动量子数v+ 越高，￠N=0的转动跃迁越占主导地位， 而转动谱线强度受邻     

An optimum design and fabrication of lens on luminous uniformity and light extraction of high-power light-emitting diode

The effect of lens inner structure on radiation pattern and light extraction efficiency of light-emitting diode (LED) and the application to artificial light in compact greenhouse is demonstrated. A commercial software package of Trace Pro and one-factor at-a-time (OFAT) method are used to simulate the lens with different inner structure. The optimum parameters of lens inner structure design for the maximum light extraction efficiency and the best uniform luminous are described by the corner radius of curvature, lens width, and lens height, respectively. For a real single LED module, base on the optimum parameters of lens inner structure, the corresponding best luminous uniformity is 62% and corresponding output extraction is 14.11 lm. The maximum uniformity of illumination for LED matrix assembled by LED modules with optimum lens is 88% and corresponding light extraction 1141 lm. In comparison with a commercial artificial light of LED matrix used in agriculture, the high-power LED module with proposed lens inner structure exhibit good improvement in uniformity of illumination and light extraction. This study may provide a practical guideline for design and fabrication of a high-performance lens used in various compact agricultural applications.     

Volume polarization holographic recording in thick phenanthrenequinone-doped poly(methyl methacrylate) photopolymer

Volume polarization holographic recording in phenanthrenequinone-doped poly (methyl methacrylate) photopolymer is obtained. Photoinduced birefringence in a 2 mm thick sample is measured by a phase-modulated ellipsometry. The birefringence induced in this material by linearly polarized beam at 514 nm reaches 1.2×10(-5). In addition, ability for recording volume polarization grating using two different polarization configurations is demonstrated and compared. The experimental results show that the diffraction efficiency of the hologram reaches to ～40% by using two orthogonal circularly polarized beams.     

Barium ferrite particulates prepared by a salt-melt method

Barium ferrite particulates have been prepared by coprecipitation and calcination in a flux of NaCl-KCl. It was found that a flux containing more than 30 wt% KCl tends to seriously deteriorate the magnetic properties of resultant perticulates. The flux with 10 wt% KCl or less showed promising results. A Ba(CoZr)_0.75Fe_10.5O₁₉ particulate showed the best properties, i.e., a saturation magnetization of 68.5, a squareness ratio of 0.49, and a coercivity of 1280 Oe, when calcined in NaCl at 900°C for 4 h.     

Stirling渐进公式的一个新的构造证明

本文用简易的分析工具，对ｎ！给出了一个精确等式，从而导出Ｓｔｉｒｌｉｎｇ渐近公式（２）的一个新的简短证明.     

Influence of depressed-index outer ring on evanescent tunneling loss in tapered double-cladding fibers

A tapered fiber with a depressed-index outer ring is fabricated and dispersion engineered to generate a widely tunable (1250-1650 nm) fundamental-mode leakage loss with a high cutoff slope (-1.2 dB/nm) and a high attenuation for stop band (>50 dB) by modification of both waveguide and material dispersions. The higher cutoff slope is achieved with a larger cross angle between the two refractive index dispersion curves of the tapered fiber and surrounding optical liquids through the use of depressed-index outer ring structures in double-cladding fibers.