Crystal structure and electrical conductivity of cubic fluorite-based (YO1.5) x (WO3)0.15(BiO1.5)0.85- x (0?≤ ?x ≤?0.4) solid solutions

(WO₃)_0.15(BiO_1.5)_0.85 exhibits a tetragonal structure derived from the fluorite subcell. The electrical conductivity of (WO₃)_0.15(BiO_1.5)_0.85 is lower than that of Y₂O₃-doped Bi₂O₃. The structure and electrical conductivity of samples formulated as (YO_1.5) _x (WO₃)_0.15(BiO_1.5)_{0.85- x} (x = 0.1, 0.2, 0.3, and 0.4) were investigated. The as-sintered (YO_1.5)_0.1(WO₃)_0.15(BiO_1.5)_0.75 exhibited a single cubic structure that is isostructural with δ-Bi₂O₃. For x = 0.2, 0.3, and 0.4, the as-sintered samples consisted of a cubic fluorite structure and rhombohedral Y₆WO₁₂. After heat treatment at 600 °C for 200 h, the cubic structures are stable for x = 0.1, 0.3, and 0.4. A transformation from cubic to rhombohedral phase after heat treatment at 600 °C for 200 h was observed in the sample originally formulated as (YO_1.5)_0.2(WO₃)_0.15(BiO_1.5)_0.65.     

Solvent Effects on Aza‐anionic Cycloaromatization of 2‐(2‐Substituted‐ethynyl)benzonitriles

The methanolysis of 2‐(2‐aryl ethynyl)benzonitriles is accelerated when the polar aprotic solvents are added, which could enhance the 6‐endo pathway and give isoquinolones, though the 5‐exo pathway is occupied mostly. The yields of products would also be in creased.     

Graft interpenetrating polymer networks of polyurethane and epoxy. I. mechanical behavior

Polyurethanes (PU) based on poly(butylene adipate) [PU(PBA)] and poly(oxypropylene) [PU(PPG)] polyols have bean introduced into the diglycidyl ether of bisphenol A (epoxy) to form interpenetrating polymer networks (IPNs) with a PU-grafted epoxy structure (graft-IPNs). The tensile strength in both PU(PPG)/epoxy and PU(PBA)/epoxy systems increases with increasing PU content. Maximum values emerge at PU/epoxy ratios between 19/81 and 27/73. This is explained as a result of the presence of the graft structure, which leads to more intimate interpenetration between the PU and epoxy in the graft-IPNs. Dynamic mechanical analysis (DMA) indicates that the PU introduced can be incorporated in either the α or β transition domain of the epoxy. The tensile strength of the resulting graft-IPNs shows a significant improvement as the PU is incorporated in the α transition domain of the epoxy. It is also noted that suitable amounts of PU incorporated in both the α and β transition domains of epoxy can increase the tensile strength of the IPNs, while excessive amounts of PU introduced into both α or β transition domains tend to decrease the tensile strength of the graft-IPNs.     

Synthesis,characterization, and application of light‐emitting copolyfluorenes slightly doped with distyrylbenzene derivatives

Copolyfluorenes PFG1～PFG4 slightly doped with 0.006–0.5 mol % of 2,5‐dihexyloxy‐1,4‐bis(2‐phenyl‐2‐cyanovinyl)benzene (green chromophore) were synthesized by the Suzuki coupling reaction to be evaluated as hosts for white‐light electroluminescent (EL) devices. Their optical, thermal and electrochemical properties were almost identical to those of polyfluorene ( PF ) due to minimal chromophore content. However, the electroluminescent (EL) spectra of the PFGn were very different from photoluminescence spectra in film state. Relative intensity of green emission (ca. 521 nm) in EL spectra are much stronger than those in PL spectra, which can be attributed to charges trapping in the chromophores due to its narrow band gap (E_g ≈ 2.56 eV). The performance of EL devices [ITO/PEDOT:PSS/polymer/Ca (50 nm)/Al (100 nm)] were improved with an increase in chromophore content. The PFG4 device revealed the best performance (6790 cd/m², 1.69 cd/A), and the PFG1 and PFG2 devices exhibited comparable intensity in blue and green emissions. Blend EL devices were fabricated by using the PFGn as the hosts and a red iridium complex [Ir(piq)₂(acac)] as dopant. By controlling the amount of the iridium complex, the white‐light emitting device was achieved with PFG2 , with maximum brightness and CIE coordinate being 4120 cd/m² and (0.31, 0.28), respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 149–160, 2009     

Future teachers’ competence to plan a lesson: first results of a six-country study on the efficiency of teacher education

The study "Mathematics Teaching in the 21st Century (MT21)" focuses beyond others on the measurement of teachers’ general pedagogical knowledge (GPK). GPK is regarded as a latent construct embedded in a larger theory of teachers’ professional competence. It is laid out how GPK was defined and operationalized. As part of an international comparison GPK was measured with several complex vignettes. In the present paper, the results of future mathematics teachers’ knowledge from four countries (Germany, South Korea, Taiwan, and the US) with very different teacher-education systems are presented. Significant and relevant differences between the four countries as well as between future teachers at the beginning and at the end of teacher education were found. The results are discussed with reference to cultural discourses about teacher education.     

Production of carrier-free 188Re in the past ten years in Taiwan

Twenty clinical scale alumina-based ¹⁸⁸W/¹⁸⁸Re generators and carrier-free ¹⁸⁸Re has been produced at the Institute of Nuclear Energy Research (INER-Taiwan) for over ten years. 2845.6 GBq (76.9 Ci) of ¹⁸⁸Re-perrhenate solution has been eluted from generators during the past ten years. We have used the harvesting ¹⁸⁸Re solution for labeling radiopharmaceuticals, such as ¹⁸⁸Re-HEDP, ¹⁸⁸Re-MDP, ¹⁸⁸Re-microsphere, ¹⁸⁸Re-lipiodol, and ¹⁸⁸Re-sulfur colloid, etc. The average eluting yield of ¹⁸⁸Re is 78.6±5.8% that was investigated at 1115 harvesting times from 20 generators. Each generator can be used more than six months but the Millipore needs to be changed every two months for smooth harvesting and high yield of ¹⁸⁸Re solution.     

Synthesis of electroluminescent copoly(aryl ether)s containing alternate 1,4‐distyrylbenzene derivatives and aromatic 1,3,4‐oxadiazole or 3,3″‐terphenyldicarbonitrile segments

New copoly(aryl ether)s ( P1 – P3 ) containing alternate 2,5‐dihexyloxy‐1,4‐di(m‐ethoxystyryl)benzene ( P1 , P2 ) or 2,5‐dihexyloxy‐1,4‐distyrylbenzene ( P3 ) chromophores and aromatic 1,3,4‐oxadiazole ( P1 ) or 3,3″‐terphenyldicarbonitrile ( P2 , P3 ) segments were prepared by Horner reaction ( P1 and P2 ) or nucleophilic displacement reaction ( P3 ). They are basically amorphous materials with 5% weight‐loss temperature above 410 °C. Their absorption, photoluminescence spectra, and quantum yields are dependent on the composition of the isolated fluorophores. The emissions are exclusively dominated by 1,4‐distyrylbenzene segments via excitation energy transfer from electron‐transporting 1,3,4‐oxadiazole ( P1 ) or 3,3″‐terphenyldicarbonitrile ( P2 , P3 ) chromophores. The HOMO and LUMO energy levels have been estimated from their cyclic voltammograms, and the observations confirm that oxidation and reduction start from the emitting 1,4‐distyrylbenzene and electron‐transporting segments, respectively, indicating that both carriers affinity can be enhanced simultaneously. Among the two‐layer PLED devices (ITO/PEDOT/ P1 – P3 /Al), P1 exhibits the best performance with a turn‐on field of 4 × 10⁵ V/cm and a maximum luminance of 225 cd/m². However, P2 emits green–yellow light (555 nm), owing to the excimer emission. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5009–5022, 2005     

Build-up of supercontinuum in heated and unheated photonic crystal fibers using a chirped femtosecond laser

The build-up of supercontinuum in a photonic crystal fiber (PCF) has been investigated experimentally as a function of pump power using chirped 100-fs pulses from a Ti:sapphire laser. As compared with the PCF at room temperature, a new blue-shifted spectral component is observed in the initial steps of supercontinuum (SC) generation when the central part of PCF is heated to 120 °C by a hot plate. In addition, the slope efficiency of SG is slightly improved with the slightly extension of supercontinuum spectrum in blue edge at high pump powers. The change in dispersion property as well as the effective cascading of nonlinear photonic crystal fibers for heated PCF would be the main attributions.     

Experimental limitations in impedance spectroscopy: Part VI. Four-point measurements of solid materials systems

Four-point impedance spectroscopy of solid materials systems is severely hampered by unavoidable voltage-divider effects associated with the reference electrodes. As demonstrated by test circuit studies and experiments with Pt/YSZ/Pt cells (with embedded silver reference electrodes), high impedance reference electrodes can produce distorted and erroneous impedance data. The relationships between these data and the sample properties (conductivity, dielectric constant) and instrument limitations (input impedance/capacitance) are derived. Successful four-point impedance measurements on conductive systems require large effective dielectric constants, which may be unattainable in bulk solids, but are often associated with internal interfaces.     

Asymptotic Stability for a Class of Neutral Systems with Discrete and Distributed Time Delays

In this note, the asymptotic stability for a class of neutral systems with discrete time and distributed time delays is considered. Delay-dependent criteria are proposed to guarantee the stability for such systems. Some numerical examples are given to illustrate that our results are less conservative than previous results.