Degradation induced variation of LC transition of poly(n-undecyl isocyanate)

The first-order thermal transitions including side-chain melting, crystal-LC, biphasic chimney-like, and isotropic transitions of poly(n-undecyl isocyanate) (PUDIC) were investigated by varying its thermal history. After annealing at 140 °C for different periods of time, it leads to different degrees of backbiting degradation into n-undecyl isocyanurate trimer which behaves as a solvent for the rest non-degraded/rigid PUDIC to change into a lyotropic LC from thermotropic transition. Based on the degree of degradation, various amounts of trimers are present and the PUDIC demonstrates different types of thermal transitions found in DSC thermograms due to the variation of the non-degraded PUDIC concentration in solvent trimers. Finally, a phase diagram includes all types of crystallines, LC, and isotropic regions can be drawn according to the DSC thermograms.     

Microemulsions for intravesical delivery of gemcitabine

The objective of this work was to develop a safe and effective delivery vehicle for topical treatment of gemcitabine. The physicochemical properties, drug release rate, drug level in plasma and bladder, and histological changes of tissue after drug administration were investigated. The electrical conductivity, mean size, and viscosity of drug-loaded microemulsions were 0.8-102.0 μS/cm, 116.8-322.5 nm, and 42.9-105.0 cps×103, respectively. Gemcitabine loaded microemulsions showed a slower and sustained release. After intravesical administration of aqueous control and microemulsions treated, the drug concentrations in plasma were 15.11 μg/ml and 2.81-12.82 μg/ml, respectively, and the accumulation in bladder were 18.27 μg and 9.12-64.16 μg, respectively. Microemulsions slightly decreased the systemic absorption and significantly enhanced the accumulation in bladder tissue. Moreover, the preliminary toxicity studies revealed no overt adverse histological changes or tissue irritation by the microemulsion application. Therefore, the microemulsions were suggested to be a promising drug carrier for intravesical chemotherapy.     

Development of a laser-based measurement system for evaluation of the scraping workpiece quality

A laser-based measurement system for evaluation of the scraping workpiece quality that can eliminate contact-induced measurement errors and increase measurement accuracy is proposed. The laser-based measurement system comprises a light-scattering-type triangulation laser, a computer numerical control (CNC) machine tool, and an analog-to-digital (A/D) card. The triangulation laser measures the depth of the scraping spots and the CNC machine tool locates their position. The 3D data of the scraping workpiece is then drawn using the least squares method. Cast iron and Turcite workpieces can be measured. Five parameters of the scraping workpiece, namely peak points per square inch, percentage of points, distribution of heights of points or depth of surroundings, edge shape of the grooves, and flatness, can be evaluated. The scanning rate and sampling rate of the laser-based measurement system are 100 mm/s and 10 KHz, respectively. In the future, an appliance machine based on the proposed system will be designed for the on-line detection of scraping workpieces.     

Efficient broadband silicon-on-insulator grating coupler with low backreflection

We design and fabricate an efficient broadband grating coupler on a 400 nm thick silicon-on-insulator wafer. The measured coupling loss is 3 dB when coupling to a single-mode fiber at 1310 nm wavelength with TE polarization. The spectral FWHM and backreflection are determined to be 58 nm and -27 dB, respectively.     

Application of macroautoradiography and instantimage in radiopharmaceutical research

The evaluation of the pharmacokinetics of pure, beta radiopharmaceuticals is not possible with scintigraphy. Both whole-body autoradiography (WBAR) and Packard Instantimager, a device for rapid imaging, were used to study the whole body distribution of γ- and β-emitting radionuclides (^99mTc-MDP,^99mTc-sulfur colloid, or¹⁸⁸Re-HEDP), and results obtained from both methods were compared. The biodistribution of^99mTc-MDP and¹⁸⁸Re-HEDP were seen mainly in bones including skull, spine, and vertebrae of spine and cardiac and skeletal muscles. The^99mTc-sulfur colloid localized in liver, bone marrow, and spleen. The resolution of WBAR is superior than that of Packard Instantimager. However, the advantage of Packard Instantimager is that rapid imaging within few minutes is possible with it, while WBAR imaging requires several hours to days.     

Quantitative screening and matrix effect studies of drug discovery compounds in monkey plasma using fast-gradient liquid chromatography/tandem mass spectrometry.

A higher-throughput bioanalytical method based on fast-gradient (1 min run time) high-performance liquid chromatography (HPLC) coupled with tandem mass spectrometry (MS/MS) was developed for screen-type analyses of plasma samples from early drug discovery studies in support of exploratory pharmacodynamic studies. The HPLC system equipped with minibore column was interfaced with either atmospheric pressure chemical ionization (APCI) or electrospray (ESI) ionization techniques. The matrix ion suppression effect of both quantitative HPLC/MS/MS analyses was compared using the post-column infusion system. The use of the described methods provided advantages such as a shorter chromatographic region of ion suppression, less solvent consumption and shorter run times in comparison with standard analytical column HPLC/MS/MS methods. The analytical results obtained by both HPLC/MS/MS methods were in good agreement (within 15% of error) and displayed a good correlation with the pharmacodynamic outcome.     

Crystal structure and electrical conductivity of cubic fluorite-based (YO1.5) x (WO3)0.15(BiO1.5)0.85- x (0?≤ ?x ≤?0.4) solid solutions

(WO₃)_0.15(BiO_1.5)_0.85 exhibits a tetragonal structure derived from the fluorite subcell. The electrical conductivity of (WO₃)_0.15(BiO_1.5)_0.85 is lower than that of Y₂O₃-doped Bi₂O₃. The structure and electrical conductivity of samples formulated as (YO_1.5) _x (WO₃)_0.15(BiO_1.5)_{0.85- x} (x = 0.1, 0.2, 0.3, and 0.4) were investigated. The as-sintered (YO_1.5)_0.1(WO₃)_0.15(BiO_1.5)_0.75 exhibited a single cubic structure that is isostructural with δ-Bi₂O₃. For x = 0.2, 0.3, and 0.4, the as-sintered samples consisted of a cubic fluorite structure and rhombohedral Y₆WO₁₂. After heat treatment at 600 °C for 200 h, the cubic structures are stable for x = 0.1, 0.3, and 0.4. A transformation from cubic to rhombohedral phase after heat treatment at 600 °C for 200 h was observed in the sample originally formulated as (YO_1.5)_0.2(WO₃)_0.15(BiO_1.5)_0.65.     

Solvent Effects on Aza‐anionic Cycloaromatization of 2‐(2‐Substituted‐ethynyl)benzonitriles

The methanolysis of 2‐(2‐aryl ethynyl)benzonitriles is accelerated when the polar aprotic solvents are added, which could enhance the 6‐endo pathway and give isoquinolones, though the 5‐exo pathway is occupied mostly. The yields of products would also be in creased.