A Polarization-Stabilized Fiber-Optical Output Infrared Laser Source

In this paper, we successfully invented a polarization controlled light source for coherent or noncoherent fiber communication systems. The structure of our experiment includes 89C51 control board and feedback circuit which can stabilize states of polarization (SOPs) of output light. From the SOP modulation results, the given degree of polarization can be effectively controlled and the polarization state can be arbitrarily changed.     

Sub-100 nm photolithography using TE-polarized waves in transparent nanostructures

The optical near field and its polarization anisotropy in transparent nanostructures were studied by polarization near-field optical microscopy. From experimental results and finite-difference time-domain calculations, we conclude that localized optical near fields exist at topographically higher regions of nanostructures under the TE-polarization condition. Optical near fields with a feature size smaller than 100 nm are applied for contact photomask lithography. We demonstrate photolithographic patterns with 80 nm width by using a 442 nm helium cadmium laser.     

Design and analysis of a new silicon-on-insulator waveguide Michelson interferometer sensor

A new designed and analyzed silicon-on-insulator (SOI) waveguide Michelson interferometer (SMI) sensor is proposed in this paper. The authors compare an optical SMI sensor, a silicon-on-insulator Bragg waveguide grating (SBG) sensor, and a fiber Bragg grating sensor (FBG) for temperature sensing in medicine applications. The SMI sensor has 20 times sensing more accuracy than the FBG sensor. Moreovr, the full width at half maximum (FWHM) of the pass-band frequency responses of our proposed SMI can be designed much narrower than FBG and SBG sensors for sensing resolution enhancement. Further, the improved characteristics of the SMI demonstrated in this paper could pave the way for future high density temperature monitoring medicine applications.     

Translation drag coefficient of a self-similar assembly of spheres immersed in an incompressible fluid.

On the basis of deterministic fractals and the Rotne-Prager hydrodynamic interaction tensor, we confirm the asymptotic as well as the finite size scaling of the friction coefficient lambda of a self-similar structure. The fractal assembly is made of N spheres with its dimension varying from D < 1 to D = 3. The number of spheres can be as high as N approximately O(10(4)). The asymptotic scaling behavior of the friction coefficient per sphere is lambda approximately N(1/D-1) for D > 1, lambda approximately (lnN)(-1) for D = 1, and lambda approximately N(0) for D < 1. The crossover behavior indicates that while in the regime of D > 1 the hydrodynamic screening effect grows with the size, for D<1 it is limited in a finite range, which decays with decreasing D.     

Design of broadband RF pulses with polynomial-phase response

The achievable bandwidth of common linear-phase RF pulses is limited by the maximum feasible B1 amplitude of the MR system. It has been shown previously, that this limitation can be circumvented by overlaying a quadratic phase in the frequency domain, which spreads the power across the pulse duration. Quadratic-phase RF pulses are near optimal in terms of achieving minimal B1max. In this work, it is demonstrated that further B1max reduction can be achieved by combining quadratic with higher-order polynomial-phase functions. RF pulses with a phase response up to tenth order were designed using the Shinnar-Le Roux transformation, yielding considerable increases in bandwidth and selectivity as compared to pure quadratic-phase pulses. These benefits are studied for a range of pulse specifications and demonstrated experimentally. For B1max = 20 microT and a pulse duration of 2.1 ms, it was possible to increase the bandwidth from 3.1 kHz for linear and 3.8 kHz for a quadratic to 9.9 kHz for a polynomial-phase pulse.     

1X2 and 2X2 SOI Switch Applying in Optical Communication Network

We proposed a 1 × 2 and 2×2 SOI switches for applying in fiber optic communication network. The optical path loss and signal-to-noise ratio are evaluated and compared in this paper.     

A novel 1 × 2 optical power splitter with PBG structures on SOI substrate

A novel 1 × 2 optical power splitter in size of 8.0 μm × 4.2 μm is presented in this paper, by using photonic bandgap (PBG) structures on silicon-on-insulator (SOI) substrate. The splitting ratio can be adjusted by changing the air hole position to get wide tuning range. The design is examined by the commercial finite-difference-time-domain (FDTD) software for various splitting ratios. Some approximated formulas are obtained through curve-fitting to facilitate design process.     

Synthesis of 3-(3′-Acetyl-5′-aroyl-1′,3′,4′-oxadiazolyl-2′)-chromones

A general method has been proposed for synthesizing 3-(3-acetyl-5-aroyl-1,3,4-oxadiazolyl-2)-chromones that has been based on conversion of 3-formylchromones to acylhydrazones and of theacylhydrazones into the heterocyclic chromones.     

Computational study of the halogen atom-benzene complexes

The structures of halogen atom-benzene complexes were investigated by modern DFT and ab initio computational methods. The spectroscopic properties of the complexes are also predicted and are in good agreement with experiment where such data have been reported. The fluorine atom-benzene complex is predicted to be a sigma complex due to the strength of a C-F bond. The chlorine atom-benzene complex is predicted to have an eta(1) pi complex structure, which is only slightly more favorable (1.1 kcal/mol with the BH&HLYP/6-311++G method including the ZPE correction) than a sigma complex but is significantly more stable (4.4 kcal/mol with the BH&HLYP/6-311++G method including the ZPE correction) than the eta(6) pi complex. The bromine and iodine benzene complexes are also predicted to prefer an eta(1) pi complex structure.