Solution properties of cellulose triacetate. I. Fractional precipitation

Using petroleum ether as a precipitant and chloroform–acetone mixture as solvent, six fractions of cellulose triacetate were obtained by fractional precipitation. The molecular weight of each fraction was obtained from osmotic pressure measurements carried out on chloroform solutions. It was shown that virtual nonfractionability of cellulose triacetate with regard to molecular weight occurred in this system. This behavior was also observed in attempts to fractionate it from tetrachloroethane or acetic acid solutions. These results are explained by the hypothesis that specific polymer–solvent interaction takes place due to hydrogen bonding.     

Incoherent inelastic neutron scattering studies of potassium bicarbonate and caesium hydrogen dinitrate

Inelastic neutron scattering spectra of KHCO₃ and CsH(NO₃)₂ have been obtained in the region 400 → 2400 and 400 → 2800 cm^?1 respectively. The in- and out-of-phase bending vibrations of the hydrogen bonds have been observed and assigned. For CsH(NO₃)₂ the two bending modes are closer in frequency than in KHCO₃ and they are not resolved from the antisymmetric stretch.     

Solution properties of cellulose triacetate. II. Solubility and viscosity studies

The solubility of cellulose triacetate in a range of solvents was measured, and the results for tetrachloroethane, chloroform, and acetic acid were compared with those from initial phase separation in solvent–nonsolvent mixtures and viscosity–concentration studies. The correlation found between solubilities, precipitation values, and values of the Huggins viscosity constant is discussed with reference to the type of polymer–solvent interaction proposed previously to explain fractionation behavior. A qualitative comparison of solubility–swelling behaviour was also made for a very low molecular weight cellulose triacetate sample in a wide range of solvents. Results are compared with those for higher molecular weight samples and discussed with regard to the cohesiveenergy densities of solvent and polymer. Some attempt has been made to predict suitable solvents for cellulose triacetate, based on consideration of their molecular structures.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Total syntheses of epothilones B and d

A convergent, total synthesis of epothilones B (2) and D (4) is described. The key steps are Normant coupling to establish the desired (Z)-stereochemistry at C12-C13, Wadsworth-Emmons olefination of methyl ketone 28 with the phosphonate ester 8, diastereoselective aldol condensation of aldehyde 5 with the enolate of keto acid derivatives to form the C6-C7 bond, selective deprotection of acid 52, and macrolactonization.     

Spider Silk-Improved Quartz-Enhanced Conductance Spectroscopy for Medical Mask Humidity Sensing

Spider silk is one of the hottest biomaterials researched currently, due to its excellent mechanical properties. This work reports a novel humidity sensing platform based on a spider silk-modified quartz tuning fork (SSM-QTF). Since spider silk is a kind of natural moisture-sensitive material, it does not demand additional sensitization. Quartz-enhanced conductance spectroscopy (QECS) was combined with the SSM-QTF to access humidity sensing sensitively. The results indicate that the resonance frequency of the SSM-QTF decreased monotonously with the ambient humidity. The detection sensitivity of the proposed SSM-QTF sensor was 12.7 ppm at 1 min. The SSM-QTF sensor showed good linearity of ~0.99. Using this sensor, we successfully measured the humidity of disposable medical masks for different periods of wearing time. The results showed that even a 20 min wearing time can lead to a >70% humidity in the mask enclosed space. It is suggested that a disposable medical mask should be changed <2 h.     

Characterization of Roasting Time on Sensory Quality,Color, Taste,and Nonvolatile Compounds of Yuan An Yellow Tea

Roasting is crucial for producing Yuan An yellow tea (YAYT) as it substantially affects sensory quality. However, the effect of roasting time on YAYT flavor quality is not clear. To investigate the effect of roasting time on the sensory qualities, chemical components, odor profiles, and metabolic profile of YAYTs produced with 13 min roasting, 16 min roasting, 19 min roasting, 22 min roasting, and 25 min roasting were determined. The YAYTs roasted for 22 min got higher sensory scores and better chemical qualities, such as the content of gallocatechin (GC), gallocatechin gallate (GCG), free amino acids, solutable sugar, meanwhile the lightness decreased, the hue of tea brew color (b) increased, which meant the tea brew got darker and yellower. YAYTs roasted for 22 min also increased the contents of key odorants, such as benzaldehyde, nonanal, β-cyclocitral, linalool, nerol, α-cedrol, β-ionone, limonene, 2-methylfuran, indole, and longiborneol. Moreover, non-targeted metabolomics identified up to 14 differentially expressed metabolites through pair-wise comparisons, such as flavonoids, phenolic acids, sucrose, and critical metabolites, which were the main components corresponding to YAYT roasted for 22 min. In summary, the current results provide scientific guidance for the production of high quality YAYT.     

Simultaneous Determination of Six Immunosuppressants in Human Whole Blood by HPLC-MS/MS Using a Modified QuEChERS Method

A high-performance liquid chromatography-tandem mass spectrometry method was established for the simultaneous determination of mycophenolic acid, mycophenolate mofetil, tacrolimus, rapamycin, everolimus and pimecrolimus in human whole blood by optimizing the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) preparation method. Whole blood was extracted into ethyl acetate, salted out with anhydrous magnesium sulfate, and purified with ethylenediamine-N-propyl silane adsorbent. The supernatant was evaporated under nitrogen until dry and finally reconstituted in methanol. Chromatographic separation was performed on an Agilent Poroshell 120 EC-C18 column in methanol (mobile phase A)-water (optimized for 0.1% acetic acid and 10 mM ammonium acetate, mobile phase B) at a 0.3 mL·min⁻¹ flow rate. Electrospray ionization and positive ion multiple reaction monitoring were used for detection. The time for of analysis was 13 min. The calibration curves range of tacrolimus, rapamycin, everolimus and pimecrolimus were in the range of 1–100 ng·mL⁻¹, mycophenolate mofetil in the range of 0.1–10 ng·mL⁻¹ and mycophenolic acid at 10–1000 ng·mL⁻¹. All correlation coefficients were >0.993. The coefficients of variation (CV, %) for inter-day and intra-day precision were less than 10%, while the spiked recoveries were in the range of 92.1% to 116%. Our method was rapid, sensitive, specific, and reproducible for the simultaneous determination of six immunosuppressants in human whole blood. Importantly, our approach can be used to monitor drug concentrations in the blood to facilitate disease treatment.     

Level Statistics Crossover of Chiral Surface States in a Three-Dimensional Quantum Hall System

Recent experiments have demonstrated the realization of the three-dimensional quantum Hall effect in highly anisotropic crystalline materials, such as ZrTe|_5 and BaMnSb_2. Such a system supports chiral surface states in the presence of a strong magnetic field, which exhibit a one-dimensional metal-insulator crossover due to suppression of surface diffusion by disorder potential. We study the nontrivial surface states in a lattice model and find a wide crossover of the level-spacing distribution through a semi-Poisson distribution. We also discover a nonmonotonic evolution of the level statistics due to the disorder-induced mixture of surface and bulk states.