A novel design using meshed-planar fan-electromagnetic bandgap (MP-FEBG) structure for ultra-wideband (UWB) antenna

A concept to combine the plane fan antenna with the meshed-planar electromagnetic bandgap (MP-EBG) structure is proposed; and then, based on the theory, a novel ultra-wideband (UWB) antenna with double-deck meshed-planar fan-electromagnetic bandgap (MP-FEBG) is designed. The structure of the sector is beneficial to the increase of the antenna bandwidth. The double layer structure can greatly reduce the size of the antenna, and the aperture structure can easily adjust antenna's performance. The antenna is compact in size, suitable for UWB applications. An antenna model was established on the substrate of FR4 and at least 79.1% dimension of the antenna was reduced by the traditional UWB antenna in the related documents. The simulation results show that the antenna can achieve a wide bandwidth from 3.20 to 15.78 GHz with return loss less than −10 dB and exhibit stable antenna gain. Furthermore, the measurement result is in better consistence with the simulation result.     

基于RBF神经网络的较低浓度下同步荧光光谱的溢油鉴别

针对海面溢油样品的含量难以确定,同时考虑到海水掺杂及风化等问题的影响,提出了在较低非线性浓度范围内采集溢油嫌疑样品的同步荧光光谱,获取其训练样本集,利用主成分分析法(Principal com-ponent analysis,PCA)提取其特征光谱,结合径向基函数(Radial basis function,RBF)神经网络对肇事样本和嫌疑样本进行模式识别的方法。通过对相近油源原油样品分类识别研究表明:该方法仅需单次对肇事样本同步光谱测量,再借助数据分析,就可以很好区分相近油源溢油样品,外扰对识别率影响也不大。RBF神经网络算法识别率在92%左右。该结论对海洋环境中溢油的实时检测及油指纹数据信息库的建立有重要意义。     

Directed segregation in compartmentalized bi-disperse granular gas

A bi-disperse granular gas in an asymmetrical two-compartment system is studied experimentally.The presence of asymmetry within the range of our experimental parameters results in a directed segregated state and a directed clustering state.This deterministic system does not depend on the initial conditions.A modified flux model based on Lohse’s flux model for bi-disperse granular gases is derived.The modified flux model explains qualitatively the experimental results.     

Highly efficient Cherenkov radiation generation in the irregular point of hollow-core photonic crystal fiber

Highly efficient Cherenkov radiation(CR) is generated by the soliton self-frequency shift(SSFS) in the irregular point of a hollow-core photonic crystal fiber(HC-PCF) in our laboratory.The impacts of pump power and wavelength on the CR are investigated,and the corresponding nonlinear processes are discussed.When the average power of the 120 fs pump pulse increases from 500 mW to 700 mW,the Raman soliton shifts from 2210 nm to 2360 nm,the output power of the CR increases by 2.3 times,the maximum output power ratio of the CR at 539 nm to that of the residual pump is calculated to be 24.32:1,the width of the output optical spectrum at the visible wavelength broadens from 35 nm to 62 nm,and the conversion efficiency η of the CR in the experiment can be above 32%.     

一种改进的基于信息传播率的复杂网络影响力评估算法

评价网络中节点的信息传播影响力对于理解网络结构与网络功能具有重要意义.目前,许多基于最短路径的指标,如接近中心性、介数中心性以及半局部(SP)指标等相继用于评价节点传播影响力.最短路径表示节点间信息传播途径始终选择最优方式,然而实际上网络间的信息传播过程更类似于随机游走,信息的传播途径可以是节点间的任一可达路径,在集聚系数高的网络中,节点的局部高聚簇性有利于信息的有效扩散,若只考虑信息按最优传播方式即最短路径传播,则会低估节点信息传播的能力,从而降低节点影响力的排序精度.综合考虑节点与三步内邻居间的有效可达路径以及信息传播率,提出了一种SP指标的改进算法,即ASP算法.在多个经典的实际网络和人工网络上利用SIR模型对传播过程进行仿真,结果表明ASP指标与度指标、核数指标、接近中心性指标、介数中心性指标以及SP指标相比,可以更精确地对节点传播影响力进行排序.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。     

基于单次旋转的旋转非对称面形误差绝对检测技术研究

绝对检测技术是剔除干涉仪系统误差进而提高面形检测精度的有效手段。基于单次旋转的绝对检测技术由被测球面绕光轴旋转前后的检测数据,采用基于最小二乘法的Zernike多项式拟合,剔除系统误差,获得被测面的旋转非对称面形误差。详细推导了理论计算公式,分析了单次旋转角度对算法检测精度的影响,并和多次旋转法作了对比,其残差均方根(RMS)值约为1.5nm。该方法只需一次旋转两次检测,在保证检测精度的同时简化了检测过程。     

Effects of Nb substitution for Zr on the phases,microstructure and magnetic properties of Co80Zr18−xNbxB2 melt-spun ribbons

The phases, microstructure, and magnetic properties of Co₈₀Zr_18−xNb_xB₂ (x=1, 2, 3, and 4) melt-spun ribbons were investigated. The small substitution of Nb for Zr in the Co–Zr–B melt-spun ribbons resulted in the improvement of magnetic properties, especially the coercivity. The main effect of added Nb on the coercovity of Co–Zr–Nb–B melt-spun ribbons, originated from modification of the grain size of Co₁₁Zr₂ phase. The coercivity of the Co–Zr–Nb–B melt-spun ribbons depends on the annealing temperature. The optimal magnetic properties of H_c=5.1 kOe, and (BH)_max=3.4 MGOe were obtained in the Co₈₀Zr₁₅Nb₃B₂ melt-spun ribbons annealed at 600 °C for 3 min.     

PN结电容与正向直流偏压的关系

半导体PN结具有电容的性质．在正向直流偏压下,理论计算表明,PN结扩散电容的对数与正向偏压成正比．实验发现,当正向偏压小于30mV时,这种线性关系是成立的;当正向偏压大于30mV时,会偏离这种线性关系．由于PN结还具有电阻特性,对交流信号的相位有影响．随着正向偏压增大,交流信号的相位变化出现一极值．如果将PN结等效为一个电容和一个电阻并联,就可以定性解释这种变化关系．     

Effect of overlapping Debye spheres on structures of 2D dusty plasmas

In dusty plasmas, overlapping Debye spheres around dust grains could produce an attractive force between them. Its effects on static structures of two-dimensional (2D) dusty plasmas are studied here by using molecular dynamics simulations. Results, in terms of the equilibrium radial distribution function, are compared with those deduced from purely repulsive Debye-Hückel or Yukawa potential for different Coulomb-coupling and screening parameters. The effect of the attractive force is found quite noticeable for usual experimental conditions, and becomes more pronounced for larger screening parameter κ. In particular, it is observed that for large κ the attractive force is dominant, and dust grains tend to aggregate and form patterns with scattering voids.