Preparation and Characterization of Functionalized Polyaniline-Based Nanocomposite as an Antibacterial Agent

Polyaniline-co-phenylenediamine (PAn/PDA) nanocomposite has been prepared in the aqueous medium using sodium dodecyl benzene sulfonate (DBSNa) and hydroxypropylcellulose (HPC) as a surfactant. The tests used in this research to characterize the products were SEM, TEM, FTIR, UV–Visible and TGA for morphology, particle size, chemical structure and stability. The results confirm that the spherical nanocomposites (40–90 nm) were formed with high thermal stability. It is shown in the results that the physicochemical properties of poly(alkyl substituted anilines) are depended on the substituent groups that are bonded to N-position. The prepared nanocomposites were then tested for the antibacterial properties against three pathogenic strains. The antibacterial properties of nanocomposites were investigated by disk diffusion, minimum inhibitory concentration (MIC), minimum bactericidal concentrations (MBC), and bactericidal kinetic methods. The disk diffusion result indicated that the diameter of the inhibition zones of PAn/PDA–HPC nanocomposite was 9, 11, and 10 mm against E. coli, P. aeruginosa, and S. aureus respectively. It was found that the value of MIC of PAn/PDA–HPC nanocomposite against E. coli, P. aeruginosa and S. aureus were 2.5, 1.25 and 2.5 mg/mL respectively. The evaluation results revealed the PAn/PDA–HPC nanocomposite exhibited excellent inhibitory activity against both gram-negative and gram-positive bacteria.     

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

Supercritical carbon dioxide extraction and analysis of lipids from <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> using gas chromatography

The influence of six different supercritical carbon dioxide extraction conditions on the quantity and quality of the extracted lipids from Chlorella vulgaris (C. vulgaris) was examined using experimental design. The investigated parameters included dynamic extraction times (45 and 90 min), pressures (300 and 350 bars) and a modifier (with and without ethanol). By using a grinding method prior to the extraction, cells were disrupted resulting in an enhanced extraction yield. The results showed that the total lipid yields increased by increasing the pressure, extraction time and the modifier. Applying harsher extraction conditions increased the extraction of longer-chain fatty acids (FAs), changed the FA compositions and enhanced the total lipid yield. Using transesterification, the extracted lipids were converted to biodiesel. The biodiesel physiochemical properties were estimated using empirical equations based on the fatty acid methyl ester contents. Furthermore, analysis of the protein content of remaining biomass showed a decrease in protein content with increasing the lipid extraction yield.     

Synthesis of new dyes containing double tetrazole groups for sensitization of TiO<Subscript>2</Subscript> nanoparticles in dye-sensitized solar cells

Di(1H-tetrazol-5-yl)methane is employed as a new electron acceptor group in the synthesis of two metal-free organic dyes containing triphenylamine donor group. Dye-sensitized nanocrystalline TiO₂ solar cell (DSSC) applying these novel dyes is constructed for consideration of their photovoltaic properties. The electronic properties of the dyes are also considered with the aid of theoretical calculations. The DSSC constructed from 4-(2,2-di(1H-tetrazol-5-yl)vinyl)-N,N-diphenylaniline (T1) shows a short-circuit photocurrent density of 13.38 mA cm^?2, an open circuit voltage of 578 mV, and a fill factor of 0.54, with a resulted solar energy-to-electricity conversion efficiency of 4.18% under simulated 1 sun irradiation (100 mW cm^?2). This result reveals that the dye with the di(1H-tetrazol-5-yl)methane anchoring group injects more electrons to the conduction band of TiO₂ in comparison with its analogs with single tetrazole ring in their anchoring group. It is found that in spite of a red-shift of the absorption spectrum resulted from the lengthening of the molecule, the dye with two di(1H-tetrazol-5-yl)methane groups gives lower performance than the dye with a single electron acceptor.     

Stochastic optimization of an urban rail timetable under time‐dependent and uncertain demand

Urban rail planning is extremely complex, mainly because it is a decision problem under different uncertainties. In practice, travel demand is generally uncertain, and therefore, the timetabling decisions must be based on accurate estimation. This research addresses the optimization of train timetable at public transit terminals of an urban rail in a stochastic setting. To cope with stochastic fluctuation of arrival rates, a two‐stage stochastic programming model is developed. The objective is to construct a daily train schedule that minimizes the expected waiting time of passengers. Due to the high computational cost of evaluating the expected value objective, the sample average approximation method is applied. The method provided statistical estimations of the optimality gap as well as lower and upper bounds and the associated confidence intervals. Numerical experiments are performed to evaluate the performance of the proposed model and the solution method.     

On the intersection graph of a finite group

For a finite group G, the intersection graph of G which is denoted by Γ(G) is an undirected graph such that its vertices are all nontrivial proper subgroups of G and two distinct vertices H and K are adjacent when H ∩ K ≠ 1. In this paper we classify all finite groups whose intersection graphs are regular. Also, we find some results on the intersection graphs of simple groups and finally we study the structure of Aut(Γ(G)).     

Reinvestigation of the Synthesis of Ketanserin (5) and its Hydrochloride Salt (5.HCl) via 3‐(2‐Chloroethyl)‐2,4‐(1H,3H)‐quinazolinedione (2) or Dihydro‐5H‐oxazole(2,3‐b)quinazolin‐5‐one (1)

The synthesis of ketanserin ( 5 ) and its hydrochloride salt ( 5.HCl ) using respectively equimolar amounts of 3‐(2‐chloroethyl)‐2,4‐(1H,3H)‐quinazolinedione ( 2 ) with 4‐(parafluorobenzoyl)piperidine ( 3 ) and dihydro‐5H‐oxazole(2,3‐b)quinazolin‐5‐one ( 1 ) with hydrochloride salt of 4‐(parafluorobenzoyl)piperidine ( 3.HCl ) is reinvestigated. The one‐pot reaction of ethyl‐2‐aminobenzoate with ethyl chloroformate and ethanol amine has afforded 3‐(2‐chloroethyl)‐2,4‐(1H,3H)‐quinazolinedione ( 2 ) (86%) that was then refluxed with 4‐(parafluorobenzoyl)piperidine ( 3 ) in ethyl methyl ketone in the presence of sodium carbonate to obtain free base of ketanserin (87%). In another attempt, a very pure hydrochloride salt of ketanserin ( 5.HCl ) was synthesized using equimolar amounts of dihydro‐5H‐oxazole(2,3‐b)quinazolin‐5‐one ( 1 ) and hydrochloride salt of 4‐(parafluorobenzoyl)piperidine ( 3.HCl ) by a solvent‐less fusion method. Thus, under optimized conditions, 180°C and a reaction time of 30 min, the powder mixture was transformed into glassy crystals that were initially readily soluble in chloroform but were transformed afterwards over time (2 h) to white precipitates ( 5.HCl ) suspended in chloroform with a yield of 72%.     

Spectroscopic studies and molecular orbital analysis on platinanaphthalenes and ring-fused B-N platinanaphthalenes

The electronic structure and properties of the platinanaphthalenes, and ring-fused B-N platinanaphthalenes isomers have been explored using the hybrid density functional mpw1pw91 theory. The energetic aspect shows that stability of Ptb and Pta isomers are isoenergetic in platinanaphthalenes. On the other hand, BNa1 isomer is the most stable isomer of ring-fused B-N platinanaphthalenes. This is compatible with principles of minimum energy and minimum polarizability in ring-fused B-N platinanaphthalenes. Molecular orbital analysis shows increasing of hardness in ring-fused B-N platinanaphthalenes isomers. Also, electronic spectra analysis indicates that, in all the molecules HOMO-1 → LUMO transition makes the major contribution in most intense electronic transition.     

Efficient Synthesis of Pyrrolo[1,2-f]phenanthridine Derivatives via Dipolar Cycloaddition of Phenanthridine,Activated Acetylenes,and Ethyl Bromopyruvate

The three-component reactions of phenanthridine, activated acetylenes, and ethyl bromopyruvate through both of simultaneous and stepwise process are surveyed. The reactions afforded the corresponding pyrrolo[1,2-f]phenanthridine derivatives in good yields without using any catalyst and activation.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]