A selective electromembrane extraction of uranium (VI) prior to its fluorometric determination in water

A novel method for the selective electromembrane extraction (EME) of U⁶⁺ prior to fluorometric determination has been proposed. The effect of extraction conditions including supported liquid membrane (SLM) composition, extraction time and extraction voltage were investigated. An SLM composition of 1% di-2-ethyl hexyl phosphonic acid in nitrophenyl octyl ether (NPOE) showed good selectivity, recovery and enrichment factor. The best performance was achieved at an extraction potential of 80 volts and an extraction time of 14 minutes Under the optimized conditions, a linear range from 1 to 1000 ng mL⁻¹ and LOD of 0.1 ng mL⁻¹ were obtained for the determination of U⁶⁺. The EME method showed good performance in sample cleanup and the reduction of the interfering effects of Mn²⁺, Zn²⁺, Cd²⁺, Ni²⁺, Fe³⁺, Co²⁺, Cu²⁺, Cl⁻ and PO₄³⁻ ions during fluorometric determination of uranium in real water samples. The recoveries above 54% and enrichment factors above 64.7 were obtained by the proposed method for real sample analysis.     

Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

CuO‐CeO2 Nanocomposite: A Highly Efficient Recyclable Catalyst for the Green Synthesis of 1,8‐Dioxooctahydroxanthenes in Water

CuO‐CeO₂ nanocomposite is reported as a highly efficient and recyclable catalyst for the green synthesis of 1,8‐dioxooctahydroxanthenes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any losing of its efficiency.     

NH2SO3H and H6P2W18O62 · 18H2O-Catalyzed,Three-Component,One-Pot Synthesis of Benzo[c]acridine Derivatives

We report here two simple methods for the synthesis of benzo[c]acridine derivatives from three-component, one-pot condensation of 1-naphthylamine, dimedone, and a variety of substituted aldehydes in the presence of a catalytic amount of NH₂SO₃H or H₆P₂W₁₈O₆₂ · 18H₂O under solvent-free conditions at 120 °C or in refluxing ethanol.     

Efficient Synthesis of Bis-Coumarins Using Silica-Supported Preyssler Nanoparticles

Reaction of aldehydes and 4-hydroxycoumarin in the presence of catalytic amount of silica-supported Preyssler nanoparticles led to synthesis of bis-coumarins in excellent yields.     

Solvent‐Free Chemoselective Synthesis of 1,1‐Diacetates Catalyzed by Cu(NO3)2 · 3H2O

1,1‐Diacetates have been synthesized by the reaction of a variety of aldehydes with acetic anhydride in the presence of cupric nitrate as catalyst under solvent‐free conditions. Ketones were not converted to the corresponding diacetates under these conditions.     

Synthesis,characterization and theoretical evaluations of HMDS promoted chemoselective O-alkylation of uracils

The sodium salts of the conjugated bases of uracils undergo highly chemoselective O⁴-monoalkylation when treated with various alkyl halides in dry DMF, while the use of methyl iodide results in N¹+N³-dimethylation. Theoretical evaluations of the chemo- and regioselectivity along with X-ray crystallographic data are presented.     

Evaluation of the cyclotron production of 165Er by different reactions

Erbium-165 with 10.3 h physical half-life decays completely by electron capture to the ground state of stable isotope ¹⁶⁵Ho and it is an ideal radio lanthanide for Auger electron therapy. Excitation function of ¹⁶⁵Er via ^natEr(p,x)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁶Er(p,2n)¹⁶⁵Tm → ¹⁶⁵Er, ¹⁶⁵Ho(p,n)¹⁶⁵Er and ¹⁶⁵Ho(d,2n)¹⁶⁵Er reactions were calculated using ALICE/ASH (Hybrid and GDH models) and EMPIRE 3.1 codes and then were compared with the reported measurement by experimental data and TENDL-2011. Physical yield and target thickness were evaluated with attention to excitation function, stopping power and SRIM code. ¹⁶⁵Er was produced using the sedimentation technique through the ^natEr (p,x)¹⁶⁵Tm → ¹⁶⁵Er reaction. The deposited target was irradiated with 15 MeV proton beams at 20 μA current for 1 h. The ¹⁶⁵Tm production yield was 26 MBq/μA h at the end of bombardment.