Rubber blend/clay nanocomposites based on the 50/50 (wt %) natural rubber/butadiene rubber was prepared by the latex method via mixing the latex of 50/50 NR/BR blend with different amounts of the aqueous sodium montmorillonite (Na-MMT) dispersion and co-coagulating the mixture. XRD and TEM were used to characterize structure of the nanocomposites. It was found that fully exfoliated structure could be obtained by this method only when the low loading of layered silicate (up to 5 phr) is used. With increasing the clay content, both non-exfoliated (stacked layers) and exfoliated structures can be observed simultaneously in the nanocomposites. Nanocomposites showed mechanical properties better than the clay-free volcanizate. Moreover, modulus, tensile strength, elongation at break and tear strength increased significantly by increasing the clay amount up to 5 phr and then remained almost constant by further increasing the clay content. Improvement in the mechanical properties by increasing the clay loading up to 5 phr was attributed to the nano-reinforcement effect of Na-MMT. TGA results indicated an improvement in the main decomposition temperature by increasing the clay amount. 相似文献
A simple and efficient synthesis of pentasubstituted pyrroles has been developed using a one-pot, two-step reaction. The synthesis of a series of 4-hydroxypenta-1,3-diene-tricarboxylates from alkyl acetoacetates and dialkyl acetylenedicarboxylates in the presence of K2CO3, followed by cyclization with amines, gave the corresponding pyrroles in excellent yields. 相似文献
In this research, we develop dual modality molecular imaging and also radio-immunotherapy (RIT) bioprobes, in the form of modified superparamagnetic iron oxide nanoparticles (SPIONs) conjugated to radiolabeled antibodies, for PET and MRI of HER2 expressing cancers as well as a PH sensitive drug carrier by embedded an anticancer agent for cancer therapeutic applications. The bioprobes were developed by conjugating 64Cu labeled trastuzumab (herceptin) and rituximab (Anti CD-20) antibodies to modified SPIONs. The SPIONs were modified with carboxymethyl chitosan and functionalized with acrylic acid (AA). Also, with the purpose of identifying more effective bifunctional chelator (BFC), we compared the properties of novel BFC, p-NO2-Bn-PCTA with the commonly used DOTA-NHS for radio-immunoconjugate preparations. Moreover, a chemotherapy drug, doxorubicin, was then loaded onto engineered nanoparticles for targeted intracellular drug delivery and selective cancer cell killing. Resulting radio-immunoconjugated-SPIONs were evaluated for molecular imaging and effective targeting of the HER2+ receptors in SKBR3 cell lines and breast tumor bearing Balb/C mice. Therefore, our biocompatible SPIONs could serve as a promising multifunctional theranostics nanoplatform in dual modality imaging guided RIT of HER2 overexpressing cancer applicable to drug delivery and controlled drug release for trigger both intrinsic and extrinsic pathways of apoptosis. 相似文献
For the first time, a polypyrrole–carbon nanotubes–silicon dioxide composite film coated on a steel wire was prepared by an electrochemical method. Scanning electron microscopy images showed that this composite film was even and porous. The prepared fiber was used as an absorbent for the headspace solid‐phase microextraction of benzene, toluene, ethylbenzene, and o‐xylene, followed by gas chromatographic analysis. This method presented an excellent performance, which was much better than that of a polypyrrole–carbon nanotube fiber. It was found that under the optimized conditions, the linear ranges were 0.01–200 ng/mL with correlation coefficients >0.9953, the detection limits were 0.005–0.020 ng/mL, the relative standard deviations were 3.9–6.4% for five successive measurements with a single fiber, and the reproducibility was 5.5–8.5% (n = 3). Finally, the developed method was successfully applied to real water samples, and the relative recoveries obtained for the spiked water samples were from 91.0 to 106.7%. 相似文献
A headspace solid‐phase microextraction method was developed for the preconcentration and extraction of methyl tert‐butyl ether. An ionic‐liquid‐mediated multiwalled carbon nanotube–poly(dimethylsiloxane) hybrid coating, which was prepared by covalent functionalization of multiwalled carbon nanotubes with hydroxyl‐terminated poly(dimethylsiloxane) using the sol–gel technique, was used as solid‐phase microextraction adsorbent. This innovative fiber exhibited a highly porous surface structure, high thermal stability (at least 320°C) and long lifespan (over 210 uses). Potential factors affecting the extraction efficiency were optimized. Under the optimum conditions, the method LOD (S/N = 3) was 0.007 ng/mL and the LOQ (S/N = 10) was 0.03 ng/mL. The calibration curve was linear in the range of 0.03–200 ng/mL. The RSDs for one fiber (repeatability, n = 5) at three different concentrations (0.05, 1, and 150 ng/mL) were 5.1, 4.2, and 4.6% and for the fibers obtained from different batches (reproducibility, n = 3) were 6.5, 5.9, and 6.3%, respectively. The developed method was successfully applied to the determination of methyl tert‐butyl ether in different real water samples on three consecutive days. The relative recoveries for the spiked samples with 0.05, 1, and 150 ng/mL were between 94–104%. 相似文献
Colloid Journal - Preparation of complex nano- and micron-sized non-spherical particulate geometries still remains a challenge. One potential approach is the utilization of natural templates with... 相似文献
Journal of Solid State Electrochemistry - A facile and sensitive approach is introduced to precisely determine trace amounts of prostate specific antigen (PSA) by gold nanostructures deposited on... 相似文献
This study has concerned the development of polymer composite electrolytes based on poly(vinyl butyral) (PVB) reinforced with calcinated Li/titania (CLT) for use as an electrolyte in electrochemical devices. The primary aim of this work was to verify our concept of applying CLT-based fillers in a form of nano-backbone to enhance the performance of a solid electrolyte system. To introduce the network of CLT into the PVB matrix, gelatin was used as a sacrificial polymer matrix for the implementation of in situ sol–gel reactions. The gelatin/Li/titania nanofiber films with various lithium perchlorate (LiClO4) and titanium isopropoxide proportions were initially fabricated via electrospinning, and ionic conductivities of electrospun nanofibers were then examined at 25 °C. In this regard, the highest ionic conductivity of 2.55 × 10−6 S/cm was achieved when 10 wt% and 7.5 wt% loadings of LiClO4 and titania precursor were used, respectively. The nanofiber film was then calcined at 400 °C to remove gelatin, and the obtained CLT film was then re-dispersed in solvated PVB-lithium bis(trifluoromethanesulfonyl)imide (PVB-LiTFSI) solution before casting to obtain reinforced composite solid electrolyte film. The reinforced composite PVB polymer electrolyte film shows high ionic conductivity of 2.22 × 10−4 S/cm with a wider electrochemical stability window in comparison to the one without nanofillers.
Journal of Cluster Science - This work reports on the outcome of the calcination of gold nanoparticles incorporated polyacrylonitrile nanofibers in air which results in the formation of gold... 相似文献