A novel sensor of cysteine self-assembled monolayers over gold nanoparticles for the selective determination of epinephrine in presence of sodium dodecyl sulfate

A novel sensor of cysteine self-assembled monolayers over gold nanoparticles modified gold electrode has been constructed for the determination of epinephrine in presence of sodium dodecyl sulfate (Au/Au(nano)-CysSDS). Electrochemical investigation and characterization of the modified electrode are achieved using cyclic voltammetry, linear sweep voltammetry, and scanning electron microscopy. The Au/Au(nano)-CysSDS electrode current signal is remarkably stable via repeated cycles and long term stability, due to the strong Au-S bond, compared to the Au/Au(nano) electrode. The catalytic oxidation peak currents obtained from linear sweep voltammetry (LSV) increased linearly with increasing epinephrine concentrations in the range of 2 to 30 μmol L(-1) and 35 to 200 μmol L(-1) with correlation coefficients of 0.9981 and 0.9999 and a limit of detection of 0.294 nmol L(-1) and 1.49 nmol L(-1), respectively. The results showed that Au/Au(nano)-CysSDS can selectively determine epinephrine in the coexistence of a large amount of uric acid and glucose. In addition, a highly selective and simultaneous determination of tertiary mixture of ascorbic acid, epinephrine, and acetaminophen is explored at this modified electrode. Excellent recovery results were obtained for determination of epinephrine in spiked urine samples at the modified electrode. Au/Au(nano)-CysSDS can be used as a sensor with excellent reproducibility, sensitivity, and long term stability.     

Phase stability,elastic, electronic,thermal and optical properties of Ti3Al1−xSixC2 (0≤x≤1): First principle study

The structural parameters with stability upon Si incorporation and elastic, electronic, thermodynamic and optical properties of Ti₃Al_1−xSi_xC₂ (0≤x≤1) are investigated systematically by the plane wave pseudopotential method based on the density functional theory (DFT). The increase of some elastic parameters with increasing Si-content renders the alloys to possess higher compressive and tensile strength. The Vickers hardness value obtained with the help of Mulliken population analysis increases as x is increased from 0 to 1. The solid solutions considered are all metallic with valence and conduction bands, which have a mainly Ti 3d character, crossing the Fermi level. The temperature and pressure dependences of bulk modulus, normalized volume, specific heats, thermal expansion coefficient, and Debye temperature are all obtained through the quasi-harmonic Debye model with phononic effects for T=0−1000 K and P=0−50 GPa. The obtained results are compared with other results available. Further an analysis of optical functions for two polarization vectors reveals that the reflectivity is high in the visible–ultraviolet region up to ∼10.5 eV region showing promise as a good coating material.     

Slow insertion kinetics during interaction of a model antimicrobial peptide with unilamellar phospholipid vesicles

The mechanism of interaction between a model antimicrobial peptide and phospholipid unilamellar vesicle membranes was studied using fluorescence spectroscopy, fluorescence lifetime measurements, and light scattering. The peptide, a mellitin mutant, was labeled at position K14 with the polarity-sensitive probe AlexaFluor 430. The kinetics of the interaction of this derivative with various concentrations of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) vesicles was examined. Our work unveiled two novel aspects of peptide-lipid interactions. First, the AB plot or phasor analysis of the fluorescence lifetime studies revealed at least three different peptide states, the population of which depended on the lipid to peptide (L:P) concentration ratio. Second, complex fluorescence kinetics were observed over extended time-scales from 30 s to 2 h. The extended kinetics was only observed at particular lipid concentrations (L:P ratios 20:1 and 10:1) and not at others (30, 40, 50 and 100:1 L:P ratio). Analysis of the complex kinetics revealed several intermediates. We assign these to distinct states of the peptide formed during helix insertion into the vesicle membrane that are intermediate to lytic pore formation.     

Design of highly nonlinear dispersion flattened hexagonal photonic crystal fibers for dental optical coherence tomography applications

In this paper, we propose a highly nonlinear dispersion flattened hexagonal photonic crystal fiber (HNDF-HPCF) with nonlinear coefficients as large as 57.5W⁻¹ km⁻¹ at 1.31 μm wavelength for dental optical coherence tomography (OCT) applications. This HNDF-HPCF offers not only large nonlinear coefficient but also very flat dispersion slope and very low confinement losses. Using these characteristics of our proposed PCF, it is shown through simulations by using finite difference method with an anisotropic perfectly matched boundary layer that this PCF offers the efficient supercontinuum (SC) generation for dental OCT applications at 1.31 μm wavelength using a picosecond pulse easily produced by commercially available less expensive laser sources. Coherent length of light source using SC is found 10 μm and the spatial resolutions in the depth direction for dental applications of OCT are found about 6.1 μm for enamel and 6.5 μm for dentin.     

Broadband light source based on highly nonlinear non-circular core photonic crystal fiber for medical applications

We present a highly nonlinear non-circular core photonic crystal fiber (HNL-NCPCF) with all normal group velocity dispersion (GVD) to design a supercontinuum (SC) light source for optical coherence tomography (OCT) system. Nonlinear coefficient $\gamma$ is increased as large as 66 W^?1 km^?1 at $1.31\mathrm{\mu }\mathrm{m}$ by reducing the effective mode area and core is made non-circular to increase birefringence by putting the square lattice of air-holes inside the silica host. About 85 nm 10 dB spectral bandwidths for 2.5 ps input optical pulse and 140 nm 10 dB spectral bandwidths for 1.0 ps input optical pulse have been observed using the same fiber length of 200 m and input optical power of 15 W. Coherent lengths of the generated supercontinuum light sources are found $8.91\mathrm{\mu }\mathrm{m}$ for 2.5 ps input optical pulse and $5.41\mathrm{\mu }\mathrm{m}$ for 1.0 ps input optical pulse. Therefore, the highest longitudinal resolution for dental OCT at $1.31\mathrm{\mu }\mathrm{m}$ is found about $3.28\mathrm{\mu }\mathrm{m}$ for tooth enamel.     

Separation and identification of volatile compounds from liquid cultures of Trichoderma harzianum by GC-MS using three different capillary columns

A simple, fast, repeatable and less laborious sample preparation protocol was developed and applied for the analysis of biocontrol fungus Trichoderma harzianum strain FA1132 by using gas chromatography-mass spectrometry. The match factors for sample spectra with respect to the mass spectra library of fungal volatile compounds were determined and used to study the complex hydrocarbons and other volatile compounds, which were separated by using different capillary columns with nonpolar, medium polar and high polar stationary phases. To date, more than 278 volatile compounds (with spectral match factor at least 90%) such as normal saturated hydrocarbons (C7-C30), cyclohexane, cyclopentane, fatty acids, alcohols, esters, sulfur-containing compounds, simple pyrane and benzene derivatives have been identified. Most of these compounds have not previously been reported. The method described in this paper is a more convenient research tool for the detection of volatile compounds from the cultures of T. harzianum.     

Electronic structures of AlMoO(y)(-) (y = 1-4) determined by photoelectron spectroscopy and density functional theory calculations

Vibrationally-resolved photoelectron spectra of AlMoO(y)(-) (y = 1-4) are presented and analyzed in conjunction with density functional theory computational results. The structures determined for the AlMoO(y) anion and neutral clusters suggest ionic bonding between Al(+) and a MoO(y)(-) or MoO(y)(-2) moiety, and point to the relative stability of Mo=O versus Al=O bonds. The highest occupied and partially occupied orbitals in the anions and neutrals can be described as Mo atomic-like orbitals, so while the Mo is in a higher oxidation state than Al, the most energetically accessible electrons are localized on the molybdenum center.     

A New Procedure to Measure Near Yield Residual Stresses Using the Deep Hole Drilling Technique

Mechanical strain relief techniques for estimating the magnitude of residual stress work by measuring strains or displacements when part of the component is machined away. The underlying assumption is that such strain or displacement changes result from elastic unloading. Unfortunately, in components containing high levels of residual stress, elastic-plastic unloading may well occur, particularly when the residual stresses are highly triaxial. This paper examines the performance of one mechanical strain relief technique particularly suitable for large section components, the deep hole drilling (DHD) technique. The magnitude of error is calculated for different magnitudes of residual stress and can be substantial for residual stress states close to yield. A modification to the technique is described to allow large magnitudes of residual stress to be measured correctly. The new technique is validated using the case of a quenched cylinder where use of the standard DHD technique leads to unacceptable error. The measured residual stresses using the new technique are compared with the results obtained using the neutron diffraction technique and are shown to be in excellent agreement.