Crystal and solution structures of photochromic spirobenzothiopyran. First full characterization of the meta-stable colored species.

Full elucidation for stable, colorless, and meta-stable colored structures of a new spirobenzothiopyran has been achieved both in the solid state and in a solution. 1',3',3'-Trimethyl-6-nitrospiro[(2H)-1-benzothiopyran-2,2'-indoline] with an ester group as a substituent at the 8-position of 1-sp shows photochromism. The blue-green colored species resulted from UV irradiation (365 nm) in one minute and spontaneously bleaches within one minute in acetone and methanol at 27 degrees C. UV exposure (365 nm) of 1-sp in methanol for 3 h at room temperature results in the growth of deep blue needlelike single crystals of the open form of spirobenzothiopyran, photomerocyanine 1-pmc, whose structures in the solid state and in solution were obtained unambiguously. The X-ray structural analysis of 1-pmc revealed the molecular structure of the zwitterionic photomerocyanine with s-trans,s-trans conformation. 1-pmc is soluble to polar solvents and thermally returns to 1-sp. In the DMSO solution, 1-pmc is found to return slowly to 1-sp (1-pmc gave only 18% of 1-sp for 30 min at 22 degrees C). The detailed NMR studies in DMSO-d(6) including COSY and NOE techniques as well as isotope labeling of the compound showed the structure with s-trans,s-cis conformation in a solution.     

On the problem of potential shifts at glassy carbon electrodes: Part II. Voltammetric analysis of the surface interactions involved in the electrode processes of nitrobenzenes at freshly polished and electrochemically pretreated electrodes

The contribution of the heterogeneous (involving non-adsorbed solution species) and surface path (involving adsorbed species) to the electrode processes of aromatic nitro compounds has been studied as a function of the surface conditions of glassy carbon (GC-20) by linear sweep voltammetry (LSV) and cyclic voltammetry (CV). The influence of adsorption was negligible at the freshly polished electrodes. Oxidative electrochemical pretreatment led to the formation of active sites at which the adsorption of the reactant resulted in enhanced electron-transfer rates. The nature of the adsorption process and the characteristics of the electrode reaction in the adsorbed state were studied in detail for p-nitrotoluene. The adsorption followed the Frumkin isotherm with an interaction parameter of 1.2, indicating moderate attractive interactions between the adsorbed molecules. The rate constant for the adsorbed species was of the order of 10⁵, higher than the apparent heterogeneous rate constant of p-nitrotoluene in the solution phase. The magnitude of the potential shift and the strength of adsorption varied with the relative position and electron-withdrawing power of the substituent in the aromatic ring of nitrobenzene. Free radical coupling was selectively catalysed at electrochemically pretreated electrodes.     

Intramolecular cyclization of nerol and the related (z)-allylic alcohols by means of TiCl4-PhNHMe complex. Synthesis of nezukone

Nerol is cyclized to terpinyl chloride or bromide in the presence of TiX₄-PhNHMe (1:1) complex in dichloromethane at ?23 °C, while cyclization of ($\text{Z}$)-allylic alcohols CH₂=CR-CH₂CH₂CMe=CHCH₂OH (R = H, Me, Cl) produces seven-membered ring products in fair yields.     

A convenient and efficient method for incorporation of pentafluorosulfanyl (SF5) substituents into aliphatic compounds

Both SF₅Cl and SF₅Br undergo smooth, high yield addition to alkenes and alkynes under the mild free radical chain reaction conditions of triethylborane initiation at low temperature, although the SF₅Br chemistry is somewhat limited by its competing high electrophilic reactivity with electron rich alkenes. The SF₅Cl addition reaction is relatively insensitive to a wide variety of non-allylic functionalities.     

Preparation and properties of metallacyclobutanes of nickel and palladium

Bis(phosphine)-3,3-dimethylnickela- and palladacyclobutanes have been prepared by intramolecular C-H insertion reaction of the corresponding dineopentyl metal complexes. Nickelacyclobutane complexes decompose when heated thereby undergoing competitive carbon-carbon bond cleavage to give isobutene and ethylene, with reductive elimination affording 1,1-dimethylcyclopropane and skeletal isomeri-zation of the metallacyclic ring yielding 3-methyl-1-butene, whereas the palladium analog gave no significant amounts of CC bond cleavage products.Added phos-phine was seen to have an effect on CC bond scission of nickelacyclobutane complexes. Nickelacyclobutane complexes in solution are thought to be in equilibrium with olefin-coordinated nickel-carbene complex on the basis of available experimental evidence from hydrogenolysis, carbene-trap reactions with olefins and reaction with carbon monoxide     

XPS analysis of NH3 plasma-treated polystyrene films utilizing gas phase chemical modification

Gas phase chemical modification (GCM) is found to be more preferable as a pretreatment for the XPS surface analysis of polymer materials than the conventional liquid phase treatment because it can circumvent problems such as solvent contamination and swelling. We have tried the quantification of the surface composition successfully by estimating the yield of the reaction from model samples. GCM was then applied to correlate the surface composition of NH₃ plasma-treated polystyrene films with their cell-affinity. The amount of primary-amine and that of carboxylic acid were directly determined by GCM. Although the amount of primary-amine, 15–20% of total nitrogen, did not depend on the treatment intensity, the total amine content for the treated samples increased with the plasma treatment intensity. The quantity of carboxylic acid generated was found to be very small. All treated samples had better cell-affinity than the control. The sample N2 (of medium treatment) showed the best cell-affinity. The most strongly treated sample N3, with larger amine content than N2, showed worse cell-affinity because of the interference by the sputtered SiO₂ on the surface.     

Synthesis of pyrazolo[3,4-d]pyrimidine derivatives using ketene dithioacetals

The cyclization of 5-amino-3-methylthiopyrazole-4-carbonitriles or 4-carboxamides 3a-j , which were prepared by the reaction of ketene dithioacetals 1a,b [1a : bis(methylthiomethylenemalononitrile; 1b : bis(methylthio)methylenecyanoacetamide] with hydrazines (hydrazine hydrate, phenylhydrazine, p-chlorophenylhydrazine, p-nitrophenylhydrazine), with formamide or carbon disulfide proceeded to give the corresponding 4-amino- or 4-hydroxy-3-methylthiopyrazolo[3,4-d]pyrimidines 6a-h in good yields. 3-Aminopyrazolo[3,4-d]pyrimidine derivatives 6i-1 were also obtained by the application of the cyclization reaction of 3,5-diaminopyrazoles with formamide.     

Regio- and stereoselective synthesis of (E)-alkene trans-Xaa-Pro dipeptide mimetics utilizing organocopper-mediated anti-S(N)2' reactions

Proline dipeptides (Xaa-Pro) exist as an equilibrium mixture of cis- and trans-rotamers, which depends on the energy barriers for imide isomerization. This conformation mixture contributes to both structure and function of proline-containing peptides and proteins. Structural motifs resembling these cis- or trans-conformers have served as useful tools for elucidating contributions of proline residues in the physicochemical and biological profiles of structures which contain them. Among such motifs are alkene dipeptide isosteres which mimic cis- or trans-imide using (Z)- or (E)-alkene, respectively. In this report, the first regio- and stereoselective syntheses of (E)-alkene dipeptide isosteres (20, 31, and 35) corresponding to trans-proline dipeptides are described. Key to the synthesis of these mimetics is the anti-S(N)2' reaction of vinyl aziridines such as 15 or vinyl oxazolidinones such as 28 and 32 with organocopper reagents "RCu" (R = CH(2)SiMe(2)(Oi-Pr)). Reaction of cis-vinylaziridine 15 derived from L-serine with organocopper reagent gave a precursor of the trans-L-Ser-D-Pro type alkene isosteres 20, accompanied by an S(N)2 side product. One limitation with the use of such aziridine-mediated methodology is formation of the corresponding trans-aziridine 22, which leads to L-L type isosteres, that is unstable and obtainable only in low yield. On the other hand, both isomers of oxazolidinone derivatives can be easily obtained from N-Boc-protected amino alcohols. The reaction of trans- 28 or cis-oxazolidinone derivative 32 with organocopper reagents proceeds quantitatively with high regio- and diastereoselectivities in anti-S(N)2' fashion. Subsequent oxidative treatment of the newly introduced isopropoxydimethylsilylmethyl group yields trans-L-Ser-L-Pro 31 or trans-L-Ser-D-Pro type isosteres 35, respectively. Of note, synthesized isostere 31 can also be converted to trans-phosphoSer-Pro 42 and trans-Cys-Pro mimetics 44. The present synthetic methodology affords trans-Xaa-Pro alkene-type dipeptide isosteres in high yield with relatively simple manipulation.     

Synthesis and properties of polymers containing sprio(indoline-isoxazoline)

Polymers containing spiro(indoline-isoxazoline) nuclei were prepared by 1,3-dipolar cycloaddition reactions of N,N′-alkylene-bis-3,3-dimethyl-2-methyleneindolines with bis-hydroxamic chlorides. Irradiation of the polymers with UV in solution resulted in novel skeletal rearrangements and resulted in polymers containing benzo-1,5-diazocine-2-one nuclei. Photoconductivities of the polymers were also studied.     

Direct-reading, time-resolving technique in emission spectroscopy and its application to the analysis of iron, steel and iron ores

Summary An attempt of the time-resolution of emission spectra was carried out using a simple pulse generator by impressing a gate pulse on the dynodes of a photomultiplier tube in the direct-reading spectrometer. Examinations were made on the variation of the intensity of spectral line with time in various atmospheres and it was confirmed that the after-glow is the longest in an argon atmosphere.The possibility of avoiding the effect of an interfering spectral line lying close to the analytical line was examined and this was proved to be possible with the analytical line of Si I 2881.58 å and the interfering line of Cr II 2881.93 å. The analytical line of calcium, Ca II 3933.67 å, is interfered by Fe I 3933.61 å and the effect of the spectral line of iron was avoided by the use of the time-resolving technique. This permitted the rapid determination of 0.0010.1% of calcium in iron ores by the direct-reading spectrographic analysis.

---

Zusammenfassung Ein Versuch der zeitlichen Auflösung von Emissionsspektren wurde durchgeführt unter Verwendung eines einfachen Impulsgenerators, indem man den Eröffnungsimpuls auf die Dynoden eines Photovervielfachers in einem direktschreibenden Spektrometer überlagert. Untersucht wurde die VerÄnderung der LinienintensitÄt in verschiedenartigen AtmosphÄren. Man konnte bestÄtigen, da\ das Nachglimmen in ArgonatmosphÄre am lÄngsten dauert.Auch die Möglichkeit der Vermeidung der Störung durch benachbarte Spektrallinien wurde untersucht und gefunden, da\ die Vermeidung der Störung bei der Linie Si I 2881,58 å und der Störlinie Cr II 2881,93 å möglich ist. Die Analysenlinie Ca II 3933,67 å wird durch die Linie Fe I 3933,61 å gestört, was durch die Zeitauflösungstechnik vermieden wird. Dadurch wird es möglich, 0,001–0,1% Calcium in Eisenerzen durch direktschreibende spektrographische Analyse zu bestimmen.