A Bis(azo-imine)palladium(II) System with 10 Ligand pi Electrons. Synthesis, Structure, Serial Redox, and Relationship to Bis(azooximates) and Other Species

The first azo-imine chelate system, Pd(N(H)C(R)NNPh)(2) (Pd(RA)(2)), has been isolated in the form of diamagnetic solids by the 6e(-)-6H(+) reduction of bis(phenylazooximato)palladium(II), Pd(N(O)C(R)NNPh)(2) (abbreviated Pd(RB)(2)), with ascorbic acid in a mixed solvent (R = Ph, alpha-naphthyl). Selected spectral features are described. The X-ray structures of Pd(PhA)(2) and Pd(PhB)(2) have revealed trans-planar geometry consistent with metal oxidation state of +2. Bond length trends within the chelate rings are rationalized in terms of steric and electronic factors. In Pd(PhA)(2) a total of 10 ligand pi electrons are present, each formally monoanionic ligand contributing five. Model EHMO studies have revealed that the filled HOMO (a(u)) in Pd(RA)(2) is a bonding combination of two ligand pi orbitals with large azo contributions. The LUMO (b(g)) is roughly the corresponding antibonding combination. The outer pi-electron configuration of Pd(RA)(2) is (a(u))(2)(b(g))(0). Four successive voltammetric responses, two oxidative and two reductive, are observed. The E(1/2) range is -1.3 to +0.8 V vs SCE for Pd(PhA)(2) in a 1:9 MeCN-CH(2)Cl(2) mixture (Pt electrode). EPR and electronic spectra of the electrogenerated one-electron-oxidized complex Pd(PhA)(2)(+) are described. The azo-imine system is compared with imine-imine and azo-azo systems. Crystal data for the complexes are as follows. Pd(PhA)(2): crystal system monoclinic; space group C2/c; a = 18.167(5) ?, b = 7.420(3) ?, c = 16.527(6) ?; beta = 92.70(3) degrees; V = 2225(1) ?(3); Z = 4; R = 2.61%, R(w) = 3.58%. Pd(PhB)(2): crystal system monoclinic; space group P2(1)/n; a = 5.735(5) ?, b = 10.797(6) ?, c = 18.022(11) ?; beta = 97.73(6) ?; V = 1105(1) ?(3); Z = 2; R = 3.37%; R(w) = 3.40%.     

Microwave specific Wolff rearrangement of alpha-diazoketones and its relevance to the nonthermal and thermal effect

alpha-Diazoketones possess high electric dipole moments, as a consequence of the dipolar nature of the diazocarbonyl functional group. The vectorial analysis, theoretical calculations (PM3 and ab initio), and literature reports based on experimental and theoretical calculations reveal a higher dipole moment for the Z-configuration of the diazo functional group. Microwave irradiation of alpha-diazoketone (1a-m) (Figure 1) promotes Wolff rearrangement specifically via the Z-configuration in excellent yields. The dielectric properties of the solvent govern the course of the microwave rearrangement. 3-Diazocamphor (1m) on microwave irradiation in benzylamine exhibits nonthermal effects to furnish exclusively the Wolff rearrangement product (4m), equivalent to its photochemical behavior. In the presence of an aqueous medium, through solvent heating predominates, leading to the formation of a tricyclic ketone (5) as the principal product, arising from an intramolecular C-H insertion. This behavior is similar to its known thermal and transition metal catalyzed reactivity pattern.     

Synthesis of monohydroxy-functionalized triphenylene discotics: green chemistry approach

This paper presents an environmentally benign procedure for the preparation of monohydroxy-functionalized triphenylenes using simple ionic reagents. Pyridinium hydrochloride, pyridinium hydrobromide, N-methyl pyridinium iodide, N-ethyl pyridinium bromide, and 1-n-butyl-3-methyl imidazolium bromide have been employed to prepare various monohydroxypentaalkoxytriphenylenes, which are valuable precursors for the synthesis of a variety of discotic monomers, dimers, oligomers, and polymers.     

Solvent effect on the rate of decomposition of peroxy compounds

Solvent effect on the rate of decomposition of peroxy compounds was described by multiparameter equations based on the linear Gibbs energy relationship. In the decomposition of dialkyl peroxides, the determining factors are the cohesion energy density of solvents and their ability to electrophilic solvation, which accelerate the process. In the case of hydroperoxides, the nonspecific solvation factor should additionally be taken into account.Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 10, 2004, pp. 1459–1463.Original Russian Text Copyright © 2004 by Midyana, Makitra, Palchikova.     

Molecular dynamics simulation of aqueous NaF and NaI solutions near a hydrophobic surface

We present results from molecular dynamics simulation of aqueous solutions of alkali halide salts (NaI and NaF) at the interface with hydrophobic objects. The primary objective of this study is to investigate the structural properties of the salt solutions at the hydrophobic surface. An alkane crystal has been taken as the parent model for a hydrophobic surface. A hexagonal hole was created on it, which was half a nm deep and 2.5 nm wide. The density distributions of different species (water, anions, and cations) are studied as a function of distance from the surface. While iodide prefers the interface, the fluoride ions stay inside the bulk water region. The higher concentration of iodide ions at the interface drags sodium counterions to the interface. It also decreases the water density at the interface because of steric effects of the iodide ions. The number of contacts between the surface carbons and water decreases in the case of NaI solutions but is unchanged for NaF solutions. The orientation of the water-ion and the water-water hydrogen bond vector orientations near the interface is discussed in detail.     

New conducting polymers, 3. Doping,stability, electrical,and optical characteristics of poly-(P-phenylphosphoethynediyl)

Studies on direct-current electrical conductivity and optical properties of a new solution of processable conducting polymer are reported. Electrical conductivity of thin films of the polymer on glass plate at room temperature was 6×10⁻⁶ S/cm. Study of conductivity with variation of temperature does not provide any definite thermal activation energy, which is in accordance with the amorphous nature of polymer. Optical absorption data adopting the Bardeen equation showed that maximum ‘optical gap’ (E _g ) is 3.30 eV. Doping with Br₂-vapor was found to be only partially effective in decreasingE _g by 0.43 eV. The polymer was found to be quite stable under normal atmospheric conditions. Environmental stability of both undoped and doped polymer has been discussed. Part 2: [5]     

Hydrogenation of schiff bases with group 6 metal carbonyls and sodium methoxide as catalyst precursors

Summary Schiff bases are hydrogenated to secondary amines by H₂ in the presence of [M(CO)₆](M=Cr, Mo or W) and NaOMe in methanol solution at 60–160 °C andca. 100 bar H₂ pressure. The reaction is significantly slower in the absence of NaOMe. In a stoichiometric reaction, [HCr(CO)₅]^– hydrogenatesN- benzylidene-aniline at 75 °C toN-benzylaniline forming [Cr₂(CO)₁₀]^2–.     

Size-dependent properties of Zn(m)S(n) clusters: a density-functional tight-binding study

We present the results of our theoretical calculations on structural and electronic properties of ligand-free Zn(n)S(n) [with n ranging from 4 to 104 (0.8-2.0-nm diameter)] clusters as a function of size of the clusters. We have optimized the structure whereby our initial structures are spherical parts of either zinc-blende or wurtzite structure. We have also considered some hollow bubblelike structures. The calculations are performed by using a parametrized linear combination of atomic orbitals-density-functional theory-local-density approximation-tight-binding method. We have focused on the variation of radial distribution function, Mulliken populations, electronic energy levels, band gap, and stability as a function of size for both zinc-blende and wurtzite-derived ZnS clusters. We have also reported the results of some nonstoichiometric Zn(m)S(n) (with m+n=47, 99, 177) clusters of zinc-blende modification.     

Oxanorbornenes: promising new single addition monomers for the metathesis polymerization

Higher ring-opening metathesis propagation rates of exo-norbornene derivatives over endo derivatives are well established in the literature. Here, we report for the first time that endo-isomers of oxanorbornene derivatives show higher reactivity towards ring-opening metathesis with Grubbs'' 3rd generation catalyst (G3) than the corresponding exo-isomers. A very high selectivity for the reaction of G3 with endo over the exo-isomers could be shown. Furthermore, single molecular addition of the endo-isomers with G3 was observed. On the other hand, pure exo-monomers could successfully be homopolymerized. Mixtures of exo- and endo- monomers, however, prevented the homopolymerization of the exo-monomer. Such mixtures could successfully be copolymerized with cycloalkenes, resulting in alternating copolymers. An oxanorbornadiene derivative could be shown to undergo single addition reactions, exploited in the preparation of mono-end functional ROMP polymers. These could be selectively derivatized via endgroup selective thiol-ene click reactions. A thiol and alcohol end functional ROMP polymer was synthesized, and the efficient end functionalization was confirmed by ¹H NMR spectroscopy and MALDI-ToF spectrometry.

Bridgehead revisited: endo-7-oxa norborneneimide derivatives (green) initiate faster but propagate more slowly than the analogous exo-derivatives (red) in ring-opening metathesis allowing the synthesis of alternating and end functional polymers.