Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method

In this paper, a lattice Boltzmann method is employed to simulate the conjugate radiation–forced convection heat transfer in a porous medium. The absorbing, emitting, and scattering phenomena are fully included in the model. The effects of different parameters of a silicon carbide porous medium including porosity, pore size, conduction–radiation ratio, extinction coefficient and kinematic viscosity ratio on the temperature and velocity distributions are investigated. The convergence times of modified and regular LBMs for this problem are 15 s and 94 s, respectively, indicating a considerable reduction in the solution time through using the modified LBM. Further, the thermal plume formed behind the porous cylinder elongates as the porosity and pore size increase. This result reveals that the thermal penetration of the porous cylinder increases with increasing the porosity and pore size. Finally, the mean temperature at the channel output increases by about 22% as the extinction coefficient of fluid increases in the range of 0–0.03.

     

The selective aerobic oxidation of methylaromatics to benzaldehydes using a unique combination of two heterogeneous catalysts

A unique combination of a supported cobalt complex and the first example of supported NHPI in acetic acid gives a surprisingly stable heterogeneous catalytic system for the selective aerobic oxidation of methylaromatics to benzaldehydes at atmospheric pressure.     

Synthesis of Some Novel γ-Spirolactones

Summary. We report on the addition of dialkyl acetylenedicarboxylate to 1-alkylisatins or tryptanthrine in the presence of triphenylphosphine which leads to highly functionalised novel unsaturated -spirolactones.     

Activation of trimethylsilyl cyanide by potassium phthalimide for facile synthesis of TMS-protected cyanohydrins

Potassium phthalimide was found to be a highly effective and easily accessible organocatalyst for the cyanosilylation of various carbonyl compounds under extremely mild conditions. The corresponding cyanohydrin trimethylsilyl ethers were obtained in high to quantitative yields in solvent-free conditions at room temperature using 2.5 mol% catalyst loading.     

Application of H-point standard addition method and partial least squares to the simultaneous kinetic-potentiometric determination of hydrazine and phenylhydrazine

Simultaneous determination of hydrazine (HZ) and phenylhydrazine (PHZ) by H-point standard addition method (HPSAM) and partial least squares (PLS) regression was carried out based on kinetic data from novel potentiometry methods. The rate of chloride ion production in the reaction of HZ and PHZ with N-chlorosuccinimide (NCS) was monitored by a chloride ion-selective electrode. The experimental data show the good ability of ion-selective electrodes (ISEs) as detectors not only for the direct determination of chloride ion but also for simultaneous kinetic-potentiometric analysis using HPSAM and PLS methods. The methods are based on the differences observed in the production rate of chloride ions. The results show that simultaneous determination of HZ and PHZ can be performed in concentration ranges of 0.5 - 20.0 and 0.8 - 25.0 microg mL(-1), respectively. The total relative standard error for applying the PLS method to 8 synthetic samples in the concentration ranges of 1.0 - 16.0 microg mL(-1) for HZ and 2.0 - 16.0 microg mL(-1) for PHZ was 3.96. In order for the selectivity of the method to be assessed, we evaluated the effects of certain foreign ions upon the reaction rate and assessed the selectivity of the method. Both methods (PLS and HPSAM) were evaluated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ and PHZ in water samples.     

Electrochemical Characterization of Gold 6‐Amino‐2‐mercaptobenzothiazole Self‐Assembled Monolayer for Dopamine Detection in Pharmaceutical Samples

A new sensor, gold‐6‐amino‐2‐mercaptobenzothiazole (6A2MBT), was fabricated via a self‐assembly procedure. Electrochemical properties of the monolayer were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The modified electrode showed excellent antifouling property against the oxidation products of DA, allowed us to construct a dynamic calibration curve with two linear parts, 1.00×10^?6 to 3.72×10^?4 and 3.72×10^?4 to 6.42×10^?4 M DA, with correlation coefficients of 0.997 and 0.992 and a detection limit of 1.57×10^?7 M DA by using differential pulse voltammetry (DPV), respectively. Finally, the performance of the Au‐6A2MBT modified electrode was successfully tested for electrochemical detection of DA in a pharmaceutical sample.     

A mild, clean, and simple synthesis of symmetrical carboxylic anhydrides from carboxylic acides using a polymer supported tosyl chloride

The use of polymeric reagents simplifies routine acylation of carboxylic acid because it eliminates the traditional purification. We describe the use of readily available cross-linked poly(4-vinylpyridine) supported tosyl chloride, [P₄VP].TsCl, in the suspended solution phase synthesis of symmetrical anhydrides from carboxylic acids in the presence of K₂CO₃ in high yields and purity. The products can be obtained by filtration and evaporation of the solvent.     

Linear and nonlinear intersubband optical absorption and refractive index changes of asymmetric double semi-parabolic quantum wells

The optical properties of the asymmetric double semi-parabolic quantum wells (DSPQWs) are investigated numerically for typical GaAs/Al_xGa_1−xAs. Optical properties are obtained using the compact density matrix approach. In this work, effects of the structure parameters such as the barrier width and the well widths on the optical properties of the asymmetric DSPQWs are investigated. The results show that the linear and nonlinear optical properties of asymmetric DSPQW are non-monotonic functions of these structure parameters. The behavior of the refractive index changes of asymmetric DSPQW with the variation of the barrier width is different substantially with that of symmetric DSPQW. Results reveal that the resonant peak values of the total absorption coefficient of asymmetric DSPQW is usually greater than that of symmetric DSPQW. Our calculations also show that the total absorption coefficient of asymmetric DSPQW is larger than that of asymmetric double square quantum well.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.