锑掺杂氧化锡粉体的太赫兹透射特性

以SnCl45H2O和SbCl3为原料,采用液相化学共沉淀法制备锑掺杂氧化锡（ATO）粉体。分析了不同Sb掺杂质量分数条件下,ATO粉体的禁带宽度变化,并对材料在0.2~1.6 THz波段的透射时域和频域谱,以及吸收和屏蔽参数进行了对比分析。结果表明,ATO粉体的禁带宽度随着Sb掺杂量的增加先减小后增大;同时,ATO粉体对THz波的吸收系数随着Sb掺杂量的增加先增大后减小,当Sb掺杂质量分数为9%时,ATO的吸收系数在1.25 THz处达到最大值156.5 cm-1,屏蔽效能在1.24~1.60 THz范围内最高达到45.0 dB。     

Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

随机Bonhoeffer-Van der Pol系统的随机混沌控制

讨论了具有有界随机参数的随机Bonhoeffer-Van der Pol系统的随机混沌现象，并利用噪声对其进行控制.首先运用Chebyshev多项式逼近的方法，将随机Bonhoeffer-Van der Pol系统转化为等价的确定性系统，使原系统的随机混沌控制问题转换为等价的确定性系统的确定性混沌控制问题，继而可用Lyapunov指数指标来研究等价确定性系统的确定性混沌现象和控制问题.数值结果表明，随机Bonhoeffer-Van der Pol系统的随机混沌现象与相应的确定性Bonhoeffer-Van der Pol系统极为相似.利用噪声控制法可将混沌控制到周期轨道，但是在随机参数及其强度的影响下也呈现出一些特点.     

Measurement of branching fractions for B-->eta(c)K(*) decays

We report measurements of branching fractions for charged and neutral B-->eta(c)K decays where the eta(c) meson is reconstructed in the K(0)(S)K+/-pi(-/+), K+K-pi(0), K(*0)K-pi(+), and pp; decay channels. The neutral B0 channel is a CP eigenstate and can be used to measure the CP violation parameter sin(2phi(1). We also report the first observation of the B0-->eta(c)K(*0) mode. The results are based on an analysis of 29.1 fb(-1) of data collected by the Belle detector at KEKB.     

Ultrasonic investigation of amorphous carbon in various frequencies at low temperatures from 2.1 to 300 K

Using pulse echo overlap measurement, the elastic behavior of amorphous carbon has been studied at ambient and low temperatures. The smaller ratio B/G of the bulk modulus to shear modulus and smaller Poisson's ratio σ at room temperature indicate that there is an intrinsic stiffening of transverse acoustic phonons in the amorphous carbon. The acoustic velocity and attenuation for longitudinal modes have been measured between 2.1 and 300 K at three frequencies of 7, 21 and 35 MHz, respectively. Their frequency and temperature dependence are observed. The elastic constant C₁₁ increases with decreasing temperature and show enhanced stiffening at low temperatures. In the 130-220 K region, the abnormal change and effect of longitudinal velocity and attenuation with temperature and frequency, and a phase transition associated with structure relaxations are discussed.     

New approach to Q-P （P-Q） ordering of quantum mechanical operators and its applications

In this paper, we introduce a new way to obtain the Q-P （P-Q） ordering of quantum mechanical operators, i.e., from the classical correspondence of Q-P （P-Q） ordered operators by replacing q and p with coordinate and momentum operators, respectively. Some operator identities are derived concisely. As for its applications, the single （two-） mode squeezed operators and Fresnel operator are examined. It is shown that the classical correspondence of Fresnel operator’s Q-P （P-Q） ordering is just the integration kernel of Fresnel transformation. In addition, a new photo-counting formula is constructed by the Q-P ordering of operators.     

Consistency proof of two denoising methods and the parameter selection of PDE filtering method for ESPI

Electronic speckle pattern interferometry （ESPI） is a nondestructive, whole-field optical measurement technique. The removal of speckle noise is fundamental to extract measurement information accurately. In this letter, two filtering methods based on the oriented feature of ESPI fringes, i.e., the second-order oriented partial differential equation （SOOPDE） and oriented, regularized quadratic-cost function filtering methods, are first proven to be consistent. An important question in solving partial differential equation, i.e., how to select suitable parameters in an adaptive manner, is then discussed. The computer-simulated and experimentally obtained ESPI fringe patterns and phase map are processed by the SOOPDE filtering model with adaptive selective parameters. The qualitative and quantitative analyses demonstrate that the parameters selected by the adaptive method are effective and suitable for the SOOPDE filtering model.     

近地面三阵子天线估计电磁波到达角和极化参数

从自由空间中的三阵子天线求入射电磁波极角和方位角的基本原理出发, 结合电场各个分量与极化方式之间的关系给出了左手极化波计算波达角的公式, 及地球表面上方三阵子天线判断入射波极化方向的方法; 本文提出了一种新颖的滤除地面反射波的方法, 保证了波达角的求解精度; 利用获得的高精度的波达角和测得的电场强度, 计算出了电磁波的各种极化参数, 这些极化参数可以作为电离层研究和电磁波在电离层中传播研究的参考. 关键词： 地球表面 三阵子天线 波达角 极化参数     

矿物中药钟乳石的X射线衍射Fourier指纹图谱

研究矿物中药钟乳石X射线衍射Fourier指纹图谱.对10批主产地的钟乳石药材X射线衍射Fourier图谱进行分析,建立钟乳石X射线衍射Fourier指纹图谱,并通过相似度计算,区分钟乳石、其他含钙矿物中药、同种化学试剂CaCO3.主成分相同的矿物中药利用X射线衍射Fourier指纹图谱无法完全区分,但钟乳石与同种化学试剂CaCO3的X射线衍射Fourier图谱区别显著.利用X射线衍射Fourier指纹图谱可以很好的区分含有不同化学成分的矿物药,而对于主成分相同的矿物中药,就不能简单地利用它们的X射线衍射Fourier指纹图谱加以区分,即X射线衍射Fourier指纹图谱仅具有相对的专属性.     

Mn42Al50-xFe8+x合金的磁性和磁热效应

研究了Mn₄₂Al_50-xFe_8+x合金的结构、磁性和磁热效应. 通过成分调节, 居里温度T_C在室温附近一宽温区连续可调, 分别为270 K (Mn₄₂Al₄₂Fe₁₆), 341 K (Mn₄₂Al₄₀Fe₁₈)和370 K(Mn₄₂Al₃₈Fe₂₀). 磁化强度在相变温度处发生一陡降, 热磁曲线和等温磁化曲线均未观察到热和磁的滞后, 表明发生一可逆的二级相变. 在各自居里温度附近, 0-5 T的外磁场变化下磁熵变峰值分别为2.48, 2.52和2.40 J·kg^-1·K^-1. Mn_50-xAl_50-yFe_x+y合金的磁熵变峰值虽然与许多优良的磁制冷材料相比并不大, 但是制备该化合物的原材料价格非常低廉, 制备工艺简单, 加工成型也较容易, 化合物本身耐腐蚀性、延展性较好, 且在居里温度附近发生的是可逆的二级相变, 无晶格或结构的变化, 有利于制冷剂的多次循环使用. 关键词： 磁性 磁热效应 二级相变