光学成像在疾病诊断中的应用

当前，医生们利用各种成像技术与疾病进行斗争，其中光学成像技术是获得高分辨率图像的新方法，其原理是每种生物介质具有各自特有的光谱特性，可赖以区分病变组织和正常组织，或对潜在问题准确定位。而光学相干层析则是最精确的光学成像技术，可提供１０～２０μｍ量级的高分辨率及比迄今为止任何其他技术都高的灵敏度。本文着重讨论光学相干层析术的基本原理及目前发展状况     

EIS型光寻址电位传感器及其对液体分析的研究

介绍了ＥＩＳ型光寻址电位传感器系统，并以实验为基础，研究了偏置电压，光调制频率，光功率等参数对ＥＩＳ型光寻址电位传感器光电压的影响，并提出了优化参数，为光寻址电位传感器在液体分析中的应用奠定了基础。同时发现光电压与待测液ｐＨ之间具有超能斯特响应关系的现象。     

用特征多项式构造相移干涉相位提取算式

用相移干涉术测量物体表面形貌时，各种误差因素特别是相移器移相误差的影响使得表面形貌的测量偏离了实际值，甚至会产生形貌失真的现象。采用傅里叶分析的方法对相位提取算式作了理论分析，并根据特征多项式设计分析理论构造了新的、对移相误差不敏感的相位提取算式。经实验验证，该算法有效地提高了相移干涉仪测量表面形貌的Ra值，重复测量精度达5倍以上，使测量结果更接近实际值。     

Resolution and sensitivity enhancements in strong grating based fiber Fabry–Perot interferometric sensor system utilizing multiple reflection beams

We investigate an asymmetric intensive fiber Bragg grating (FBG) defined Fabry–Perot (F–P) sensor system decoded by a multiple-path-matched Michelson interferometer. The interrogation of higher order reflection beams cannot only solve the problem of the degraded resolution induced by the spectral mismatch of the FBGs, but also amplify the effect of the fiber strain on the phase of the light. We demonstrate multiple reflection beams in the F–P cavity based on the concept of the FBG effective length for constructing respective interrogation interferometers, and present a cost function with optimized system parameters to improve noise properties. The performances of interrogating the second, third and fourth order reflection beams are compared in a strain sensing experiment arrangement. Under the condition of the same optical path length mismatch, the interrogation of the fourth order reflection beam can achieve 9.8 dB sensitivity enhancement and 3 dB resolution promotion compared with the result using the second order reflection beam.     

蓝宝石晶体的光谱精细结构、零场分裂参量及晶体结构

运用不可约张量算法和群理论构造了C3v对称晶场中3d5组念离子的252阶可完全对角化的微扰哈密顿矩阵.用此矩阵计算了Al2O3:Fe3 晶体的光谱精细结构、零场分裂参量(D,a-F)、品体结构,其理论计算值与实验值相符合,并研究了自旋四重态、自旋二重态分别对基态能级的影响,证明了自旋四重态对基态能级的贡献是主要的,自旋二重态对基态能级的贡献虽很小,但却是不可忽略的.进一步研究了SO梢合作用、SS耦合作用对Al2O3:Fe3-品体的光谱精细结构和零场分裂参量的影响,结果发现SO耦合作用是最主要的,SS耦合作用也是不可忽略的.     

A tunable and reconfigurable microwave photonic filter based on two cascaded modulators and a dispersive medium

A novel tunable and reconfigurable microwave photonic filter based on two cascaded modulators and a dispersive medium is proposed, theoretically discussed and experimentally demonstrated. A single-wavelength LD and a modulator (either a Mach-Zehnder modulator or a phase modulator which can avoid the dc bias drift problem) are used to obtain a multi-wavelength optical source. By adjusting the modulation frequency and the bias voltage on the modulators, the wavelength spacing and the relative amplitude of the optical tones change, thus making the filter tunable and reconfigurable. The experimental results show that the proposed filters have good tunability and reconfigurability and the mainlobe-to-sidelobe ratio of around 25 dB is achieved.     

Effects of the microstructure slab with pillars on light extraction of GaN light-emitting diode

The positive z direction relative light extraction efficiency of GaN light-emitting diodes with microstructure slab is calculated by three-dimensional finite-difference time-domain method, where the microstructure slab consists of a graphite lattice of pillars. The results show that the two-dimensional graphite-arranged pillars suppress light extraction. When there is a thick pillar in the middle of the pillars, the structure can enhance light extraction of the light-emitting diodes. The tower-like pillars, which are thin on the top of the pillars and thick on the bottom of the pillars, benefit the light extraction when the angle of the tower-like pillars is proper.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

X射线光栅微分相衬成像视场分析

X射线光栅微分相衬成像对由轻元素构成的物质的内部探测具有传统吸收成像无法比拟的优势, 尤其在癌症的早期诊断和轻元素材料及器件的无损检测等领域应用潜力巨大. 大视场成像是影响该技术从实验室走向实际应用的重要因素. 针对大视场成像的客观需求, 基于菲涅耳衍射原理和光栅结构特征, 建立了量化物理模型用于分析影响成像视场的因素, 提出了实现大成像视场的有效途径, 为未来大视场光栅微分相衬成像方法的设计和应用提供理论依据.     

声子角动量与手性声子

在经典的物理学理论中,声子广泛地被认为是线极化的、不具有角动量的.最近的理论研究发现,在具有自旋声子相互作用的磁性体系(时间反演对称性破缺)中,声子可以携带非零的角动量,在零温时声子除了具有零点能以外还带有零点角动量;非零的声子角动量将会修正通过爱因斯坦-德哈斯效应测量的回磁比.在非磁性材料中,总的声子角动量为零,但是在空间反演对称性破缺的六角晶格体系中,其倒格子空间的高对称点上声子具有角动量,并具有确定的手性;三重旋转对称操作给予声子量子化的赝角动量,赝角动量的守恒将决定电子谷间散射的选择定则;此外还理论预测了谷声子霍尔效应.