Selective synthesis and characterization of single-crystal silver molybdate/tungstate nanowires by a hydrothermal process

Selective synthesis of uniform single crystalline silver molybdate/tungstate nanorods/nanowires in large scale can be easily realized by a facile hydrothermal recrystallization technique. The synthesis is strongly dependent on the pH conditions, temperature, and reaction time. The phase transformation was examined in details. Pure Ag(2)MoO(4) and Ag(6)Mo(10)O(33) can be easily obtained under neutral condition and pH 2, respectively, whereas other mixed phases of Mo(17)O(47), Ag(2)Mo(2)O(7,) Ag(6)Mo(10)O(33) were observed under different pH conditions. Ag(6)Mo(10)O(33) nanowires with uniform diameter 50-60 nm and length up to several hundred micrometers were synthesized in large scale for the first time at 140 degrees C. The melting point of Ag(6)Mo(10)O(33) nanowires were found to be about 238 degrees C. Similarly, Ag(2)WO(4), and Ag(2)W(2)O(7) nanorods/nanowires can be selectively synthesized by controlling pH value. The results demonstrated that this route could be a potential mild way to selectively synthesize various molybdate nanowires with various phases in large scale.     

水煤气变换反应的微观动力学分析──Cu基催化剂上H_2S中毒失活原因的 Monte Carlo 模拟研究

用ＢＯＣＭＰ方法及ＭｏｎｔｅＣａｒｌｏ模拟技术，对Ｈ２Ｓ导致Ｃｕ基催化剂失活的原因进行了计算分析。研究结果表明，当原料气中存在Ｈ２Ｓ时，ＷＧＳ反应的活化能明显高于无Ｈ２Ｓ时的活化能，随着表面Ｈ２Ｓ浓度的增大（θ＝０，０．１０，０．２５），反应的活化能也逐渐变大（其大小比为１∶１．３４∶３．３），究其原因可归结为Ｈ２Ｓ的存在使得反应物分子的吸附热减小，从而使Ｈ２Ｏ的解离吸附（ＷＧＳ反应的速控步骤）活化能增大。     

Measurement of the half life of126Sn using a radiochemical method

The half-life of¹²⁶Sn has never been measured accurately. The value quoted in the literature is approximately 10⁵y, which was measured in 1958. In the present work we measured accruately the half life of¹²⁶Sn to be (2.5±0.2)×10⁵y using a radiochemical method.     

A facile synthesis of bifunctional phospholipids for biomimetic membrane engineering

We report a facile synthesis of bifunctional phospholipid conjugates by acylation of N-protected lyso-phosphatidylethanolamine with 12-acryloxy-1-dodecanoic acid and followed with deprotection and conjugation with biotin, FITC, Texas Red, or EMC groups. The lipid conjugates can be used to generate a multifunctional substrate-supported phospholipid membrane via bioconjugation reaction to biotin or covalent attachment to EMC at their hydrophilic terminus. In addition, conjugation to fluorophores, FITC or Texas Red, provides a convenient mechanism to monitor lipid membrane formation and stability. Significantly, in situ photopolymerization of the acrylate group at the end of one of two hydrophobic alkyl chains stabilizes the phospholipid membrane.     

Electronic effects steer the mechanism of asymmetric hydrogenations of unfunctionalized aryl-substituted alkenes

Density functional theory (PBE and B3LYP) was used to study asymmetric hydrogenations of alkenes catalyzed by an iridium imidazolylidine oxazoline complex. The calculation predicts that the alkene preferentially coordinates to the site trans to the carbene. The coordinated alkene then reacts first with the H2 ligand, then with the hydride to form alkane. Finally, the alkane is released by equilibrating with extrinsic H2 and alkene. Enantioface selectivities for hydrogenations of trisubstituted alkenes seem to be driven primarily by steric interactions with the adamantyl part of the ligand; only the smallest substituents can adopt a site close to it. Application of this theoretical model leads to correct predictions regarding the experimentally observed sense and magnitude of the enantioselectivities.     

Mechanistic evaluation of the halocyclization of 4-penten-1-ol by some Bis(2-substituted pyridine) and Bis(2,6-disubstituted pyridine)bromonium triflates

The halocyclization reaction of 4-penten-1-ol mediated by various bis(2-substituted pyridine) and (2,6- disubstituted pyridine)bromonium triflates (P(2)Br(+)OTf(-)) was investigated to determine the influence of the substituents on the mechanism of reaction. In all cases, the reaction proceeds via a two-step process where the starting P(2)Br(+) reversibly dissociates to a reactive monosubstituted PBr(+), which then is captured by 4-penten-1-ol to form halocyclized product (2-bromomethyltetrahydrofuran). The dissociation rate constant of P(2)Br(+) (k(d)) is sensitive to the steric bulk at the 2- and 6-positions, and in the case of the 2, 6-dicyclohexylpyridine or 2,6-dicyclopentylpyridine, the P(2)Br(+) species are too unstable to isolate. The partitioning ratio of the reactive intermediate (PBr(+)) between reversal and product formation (k(-)(d)/k(2)) is not particularly sensitive to the nature of the pyridine, the limiting values being 3-7 except in the case of bis(2(-)-menthylpyridine)bromonium triflate where the k(-)(d)/k(2) ratio is approximately 80. The reaction of 4-penten-1-ol and its OD isotopomer with bis(lutidine)bromonium triflate was investigated to determine the deuterium kinetic isotope effect (dkie) on the bromocyclization reaction. The (k(-)(d)/k(2))(H/D) ratio is 1.0, indicating that the rate-limiting step for the bromocyclization is probably formation of a PBr(+)-4-penten-1-ol complex which does not involve substantial changes in the bonding of the OH. The cyclization of 4-penten-1-ol and 4-pentenoic acid mediated by bis(2(-)-menthylpyridine)bromonium triflate produces an enantiomeric excess in the cyclized products of only 2.4% and 4.8% respectively.     

Ring-opening Polymerization of e-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.     

催化反应热诱导激光光偏转分析法测定尿素

报道用催化反应热诱导激光光偏转法测定痕量尿素。发现将脲酶制成一定浓度的乙醇浓液能显著地增强激光光偏转信号强度。探讨了增强作用机理以及光偏转号强度与尿素浓度的关系，并应用于尿样中尿素含量的测定，结果满意。     

六氰合铁酸铜钴在蜡浸石墨电极表面的电化学沉积

首次报道了电化学沉积的混合金属六氰合铁酸盐修饰电极作为电流型传感器的研究。针对六氰合铁酸盐修饰电极在中性和碱性条件下的不稳定性，采用混合金属电沉积的方法，成功地提高了电极的稳定性，所得到的修饰电极在 ｐＨ ４～１０之间均表现出良好的稳定性。该电极的响应时间（ｔ９５％）为 ０．５ｓ，并对Ｆｅ３＋／Ｆｅ２＋电对表现出良好的电催化作用。催化氧化峰电流与Ｆｅ２＋的浓度在１．０×１０－４～６．５×１０－２ｍｏｌ/Ｌ范围内呈很好的线性关系，检测下限为 １．４×１０－６ｍｏｌ／Ｌ。