溶液酸碱性对金纳米粒子在端基功能化单分子膜表面组装影响的SERS光谱研究

在4,4’-二硫联吡啶在Au表面形成自组装单分子层膜的基础上,采用表面增强拉曼散射光谱(SERS)研究了在不同pH值条件下金纳米粒子在4,4’-二硫联吡啶自组装单分子膜/Au体系表面的组装。研究结果表明,由于处于单分子膜表面的吡啶环中氮原子的质子化程度随溶液环境中pH值的变化而变化,使得金纳米粒子与单分子膜表面间的结合作用程度不同,由此会引起金纳米粒子在单分子膜表面的覆盖度存在差异,并最终导致所观测到的4-巯基吡啶自组装单分子膜的SERS光谱强度存在明显的差异。而且,令人感兴趣的是,所观测到的SERS谱峰强度随金纳米粒子组装时pH值的变化呈现出明显的规律性。结合分子结构特征的分析,初步阐明了SERS谱峰强度随pH值这一组装条件的改变而发生规律性变化的内在原因。     

The growth temperatures dependence of optical and electrical properties of InN films

InN films grown on sapphire at different substrate temperatures from 550°C to 700°C by metalorganic chemical vapor deposition were investigated. The low-temperature GaN nucleation layer with high-temperature annealing (1100°C) was used as a buffer for main InN layer growth. X-ray diffraction and Raman scattering measurements reveal that the quality of InN films can be improved by increasing the growth temperature to 600°C. Further high substrate temperatures may promote the thermal decomposition of InN films and result in poor crystallinity and surface morphology. The photoluminescence and Hall measurements were employed to characterize the optical and electrical properties of InN films, which also indicates strong growth temperature dependence. The InN films grown at temperature of 600°C show not only a high mobility with low carrier concentration, but also a strong infrared emission band located around 0.7 eV. For a 600 nm thick InN film grown at 600°C, the Hall mobility achieves up to 938 cm²/Vs with electron concentration of 3.9 × 10¹⁸ cm⁻³. Supported by the National Basic Research Program of China (Grant No. 2006CB6049), the National Natural Science Foundation of China (Grant Nos. 6039072, 60476030 and 60421003), the Great Fund of the Ministry of Education of China (Grant No. 10416), the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20050284004), and the Natural Science Foundation of Jiangsu Province of China (Grant Nos. BK2005210 and BK2006126)     

Engineering beneficial structures and morphologies of M-N-C oxygen-reduction catalysts derived from different metal-containing precursors

Morphologies and structures of M-N-C catalysts are the key factor for controlling the formation of catalytic active sites, which are directly connected with the electrocatalytic activities for oxygen reduction reaction (ORR). By combining different metal sources (metal-free, Co, and Fe) with polyaniline (PANI) and para-phenylenediamine functionalized GO (PGO), morphologies and structures are tuned to accelerate the ORR activity. Compared with metal-free catalyst, metal-containing catalysts show better ORR performance because of the possible synergistic effect between metal and N atoms. In particular, the improved ORR activity of Fe-PANI-PGO catalyst is obtained by rotating disc electrode (RDE) at 1600 rpm in 0.1 M KOH electrolyte. The Fe-PANI-PGO electrocatalyst has the enhanced half-wave potential of 0.89 V and the high stability with only decreasing 7 mV of half-wave potential after 10,000 cycles, implying increased number and strengthened structures of active sites. Combined with various means of characterization, advantageous morphologies and structures including large electrochemically active surface area, high graphitization degree, and thick carbon structure with more pyridinic nitrogen boned with metal atoms can greatly enhance the ORR activity and stability of the catalyst.

Open image in new window

Graphical abstract

     

Characteristics and Kinetics of Thermal Degradation of Fluoroether Rubber

An advanced, heat-resistant fluoroether rubber (FM-20) was subjected to dynamic thermogravimetric analysis (TGA) in the air atmosphere. The results suggested that its thermal degradation process can be divided into two parts. As the heating rate increased, the initial decomposition temperature and degradation temperature would move to higher ranges. The apparent activation energy of thermal decomposition, calculated by the Kissinger, Friedman and Flynn-Wall-Ozawa methods were 209, 240, and 211kJ/mol, respectively. Furthermore, the probable thermal degradation mechanism was also analyzed by the Coats-Redfern method. As a result, the most reasonable thermal degradation mechanism of FM-20 was g (α) = α^3/2     

On the Generalized Heisenberg Supermagnetic Model

In this paper, we construct the generalized Heisenberg supermagnetic models with two different constraints and investigate the integrability of the super integrable systems. By virtue of the gauge transformation, their corresponding gauge equivalent counterparts are derived, i.e., the super and fermionic mixed derivative nonlinear Schrödinger equations, respectively.     

飞秒脉冲通过多层体光栅后的衍射光强分布

基于单层体光栅的耦合波理论和矩阵光学知识,推导出飞秒脉冲通过多层体光栅衍射后的耦合波方程,并由此得到衍射光强谱和瞬时衍射效率表达式.研究结果发现衍射光强谱和瞬时衍射光强分布是与多层体光栅的结构参量,如中间填充层厚度、光栅层厚度、光栅常量及体光栅材料的折射率调制度有关系的.通过调节这些参量,获得了不同形状和不同宽度的衍射脉冲.该结果可用于设计基于多层体光栅的光通信和光脉冲整形器件.     

〈331〉晶向ZnTe单晶的太赫兹辐射-探测性能理论研究

根据光整流效应辐射太赫兹理论,计算了〈331〉晶向ZnTe单晶的太赫兹辐射性能.通过与〈110〉、〈111〉晶向对比,当晶体方位角为0°或180°时,利用〈331〉晶向ZnTe单晶辐射太赫兹信号可以与〈111〉晶向相当,强于〈110〉晶向.利用电光取样原理,计算了〈331〉晶向ZnTe单晶的太赫兹探测性能,通过理论计算为〈331〉晶向ZnTe晶体有效辐射太赫兹波提供理论依据.     

Jet ejection from droplets near the Leidenfrost temperature

Abstract  

Droplets impinging on a hot surface that is near the Leidenfrost temperature were experimentally investigated. Ejection of jets from the top of the droplet was observed during the transient interaction between the droplet and a hot wall. We term this phenomenon jet ejection from droplets. When the bottom of the droplet initially impacts the hot surface, a jet is to be ejected from the top of the droplet. The jet ejection occurred only at low impact velocities and around the wetting limit temperature. It was not observed when droplets were dropped from large heights or when the surface was at a high temperature.     

Facile fabrication of pomponlike microarchitectures of lanthanum molybdate via an ultrasound route

Pomponlike La₂(MoO₄)₃ microstructures assembled with single-crystalline nanoflakes have been facilely fabricated via a surfactant-assisted ultrasound route for the first time. Various synthesis conditions were examined, such as the surfactant concentration, the molecular structure of surfactants, and the pH value. The obtained pomponlike microstructures were characterized by X-ray diffraction (XRD), (field-emission) scanning electron microscopy [(FE)SEM], transmission electron microscopy (TEM), and nitrogen adsorption/desorption isotherms. It has been revealed that a minimum concentration of sodium dodecylsulfate (SDS) was required for the formation of pomponlike La₂(MoO₄)₃ microstructures. When the SDS concentration is above 0.02 mol L⁻¹, the pomponlike microstructures become more perfect, and the size is also increased with the increasing SDS concentration. Under the same sonication, similar pomponlike microstructures were obtained when a cationic surfactant, cetyltrimethyl ammonium bromide (CTAB), was used instead of the anionic surfactant SDS, indicating that the hydrophobic alkyl chains are an important factor for the formation of the pomponlike La₂(MoO₄)₃ microstructures. It is also found that the pomponlike La₂(MoO₄)₃ microstructures can only be obtained within an optimal pH range of 8.0–9.0 under sonication. Based on TEM, Fourier transform infrared spectroscopy (FT-IR) and solubilization experiment, a formation mechanism of pomponlike La₂(MoO₄)₃ microstructures was proposed, in which the collaborative action of surfactants and sonication plays a key role. Furthermore, the porosity of the pomponlike La₂(MoO₄)₃ microstructures were discussed.     

Experimental simulation of the Unruh effect on an NMR quantum simulator

A triad mode resonance, or three-wave resonance, is typical of dynamical systems with quadratic nonlinearities. Suspended cables are found to be rich in triad mode resonant dynamics. In this paper, modulation equations for cable’s triad resonance are formulated by the multiple scale method. Dynamic conservative quantities, i.e., mode energy and Manley-Rowe relations, are then constructed. Equilibrium/dynamic solutions of the modulation equations are obtained, and full investigations into their stability and bifurcation characteristics are presented. Various bifurcation behaviors are detected in cable’s triad resonant responses, such as saddle-node, Hopf, pitchfork and period-doubling bifurcations. Nonlinear behaviors, like jump and saturation phenomena, are also found in cable’s responses. Based upon the bifurcation analysis, two interesting properties associated with activation of cable’s triad resonance are also proposed, i.e., energy barrier and directional dependence. The first gives the critical amplitude of high-frequency mode to activate cable’s triad resonance, and the second characterizes the degree of difficulty for activating cable’s triad resonance in two opposite directions, i.e., with positive or negative internal detuning parameter.