Cloning, Expression, and Characterization of β-mannanase from Bacillus subtilis MAFIC-S11 in Pichia pastoris

The β-mannanase gene (1,029 nucleotide) from Bacillus subtilis MAFIC-S11, encoding a polypeptide of 342 amino acids, was cloned and expressed in Pichia pastoris. To increase its expression, the β-mannanase gene was optimized for codon usage (mannS) and fused downstream to a sequence-encoding modified α-factor signal peptide. The expression level was improved by 2-fold. This recombinant enzyme (mannS) showed its highest activity of 24,600 U/mL after 144-h fermentation. The optimal temperature and pH of mannS were 50 °C and 6.0, respectively, and its specific activity was 3,706 U/mg. The kinetic parameters V _max and K _m were determined as 20,000 U/mg and 8 mg/mL, respectively, representing the highest ever expression level of β-mannanase reported in P. pastoris. In addition, the enzyme exhibited much higher binding activity to chitin, chitosan, Avicel, and mannan. The superior catalytic properties of mannS suggested great potential as an effective additive in animal feed industry.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Microenvironment Effects in Electrocatalysis: Ionic‐Liquid‐Like Coating on Carbon Nanotubes Enhances the Pd‐Electrocatalytic Alcohol Oxidation

A new catalyst consisting of ionic liquid (IL)‐functionalized carbon nanotubes (CNTs) obtained through 1,3‐dipolar cycloaddition support‐enhanced electrocatalytic Pd nanoparticles (Pd@IL(Cl^?)‐CNTs) was successfully fabricated and applied in direct ethanol alkaline fuel cells. The morphology, structure, component and stability of Pd@IL(Cl^?)‐CNTs were systematic characterized by transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), Raman spectra, thermogravimetric analysis (TGA) and X‐ray diffraction (XRD). The new catalyst exhibited higher electrocatalytic activity, better tolerance and electrochemical stability than the Pd nanoparticles (NPs) immobilized on CNTs (Pd@CNTs), which was ascribed to the effects of the IL, larger electrochemically active surface area (ECSA), and greater processing performance. Cyclic voltammograms (CVs) at various scan rates illustrated that the oxidation behaviors of ethanol at all electrodes were controlled by diffusion processes. The investigation of the different counteranions demonstrated that the performance of the IL‐CNTs hybrid material was profoundly influenced by the subtly varied structures of the IL moiety. All the results indicated that the Pd@IL(Cl^?)‐CNTs catalyst is an efficient anode catalyst, which has potential applications in direct ethanol fuel cells and the strategy of IL functionalization of CNTs could be available to prepare other carbonaceous carrier supports to enhance the dispersivity, stability, and catalytic performance of metal NPs as well.     

稀土-赤霉素配合物的合成与光谱表征

为了研究稀土与赤霉素的相互作用及其生物效应,在乙醇溶液中合成了两种新型稀土(Sm,Dy)-赤霉素(GA3)配合物,并对其进行了元素分析、质谱、紫外光谱、红外光谱、差热分析等表征。结果表明:配合物的组成为RE(GA3-)2Cl.6H2O(RE:Sm3+,Dy3+),镝-赤霉素配合物的热稳定性略高于钐-赤霉素配合物的。所得的两种配合物均易溶于二甲基甲酰胺、二甲基亚砜、甲醇、乙醇,不溶于水和丙酮中。     

Pseudo almost periodic dynamics of delay Nicholson's blowflies model with a linear harvesting term

In this paper, we investigate a class of delay Nicholson's blowflies model with a linear harvesting term, new criteria for the existence and convergence dynamics of positive pseudo almost periodic solutions are established by using the fixed point method and the properties of pseudo almost periodic function, together with constructing suitable Lyapunov functionals. The obtained results extend previously known results, and they also partially answer an open problem proposed by L. Berezansky et al. Finally, an example with simulation is presented to demonstrate the effectiveness of theoretical results. Copyright © 2014 John Wiley & Sons, Ltd.     

Phosphine-catalyzed [4+2] cycloaddition of sulfamate-derived cyclic imines with allenoates: synthesis of sulfamate-fused tetrahydropyridines

Using n-PrPPh₂ as the nucleophilic catalyst, the [4+2] cycloaddition reaction of the sulfamate-derived cyclic imines with allenoates works efficiently to yield various sulfamate-fused tetrahydropyridines in high yields with excellent diastereoselectivities. Using amino acid-based bifunctional phosphine as chiral catalyst, an asymmetric [4+2] cycloaddition reaction was achieved, giving chiral sulfamate-fused tetrahydropyridines in high yields with good enantiomeric excesses.     

Novel Red Phosphorescent Polymers Bearing Both Ambipolar and Functionalized IrIII Phosphorescent Moieties for Highly Efficient Organic Light‐Emitting Diodes

A series of novel red phosphorescent polymers is successfully developed through Suzuki cross‐coupling among ambipolar units, functionalized Ir^III phosphorescent blocks, and fluorene‐based silane moieties. The photophysical and electrochemical investigations indicate not only highly efficient energy‐transfer from the organic segments to the phosphorescent units in the polymer backbone but also the ambipolar character of the copolymers. Benefiting from all these merits, the phosphorescent polymers can furnish organic light‐emitting diodes (OLEDs) with exceptional high electroluminescent (EL) efficiencies with a current efficiency (η _L) of 8.31 cd A⁻¹, external quantum efficiency (η _ext) of 16.07%, and power efficiency (η _P) of 2.95 lm W⁻¹, representing the state‐of‐the‐art electroluminescent performances ever achieved by red phosphorescent polymers. This work here might represent a new pathway to design and synthesize highly efficient phosphorescent polymers.

     

Photo-Induced Ultrafast Electron Dynamics in Anatase and Rutile TiO2: Effects of Electron-Phonon Interaction

The photo-induced ultrafast electron dynamics in both anatase and rutile TiO\begin{document}$_{2}$\end{document} are investigated by using the Boltzmann transport equation with the explicit incorporation of electron-phonon scattering rates. All structural parameters required for dynamic simulations are obtained from ab initio calculations. The results show that although the longitudinal optical modes significantly affect the electron energy relaxation dynamics in both phases due to strong Fr?hlich-type couplings, the detailed relaxation mechanisms have obvious differences. In the case of a single band, the energy relaxation time in anatase is 24.0 fs, twice longer than 11.8 fs in rutile. This discrepancy is explained by the different diffusion distributions over the electronic Bloch states and different scattering contributions from acoustic modes in the two phases. As for the multiple-band situation involving the lowest six conduction bands, the predicted overall relaxation times are about 47 fs and 57 fs in anatase and rutile, respectively, very different from the case of the single band. The slower relaxation in rutile is attributed to the existence of multiple rate-controlled steps during the dynamic process. The present findings may be helpful to control the electron dynamics for designing efficient TiO\begin{document}$_{2}$\end{document}-based devices.     

Progress of Jinping Underground laboratory for Nuclear Astrophysics (JUNA)

Jinping Underground laboratory for Nuclear Astrophysics(JUNA) will take the advantage of the ultra-low background of CJPL lab and high current accelerator based on an ECR source and a highly sensitive detector to directly study for the first time a number of crucial reactions occurring at their relevant stellar energies during the evolution of hydrostatic stars. In its first phase, JUNA aims at the direct measurements of~(25)Mg(p,γ)~(26)Al,~(19)F(p,α)~(16)O,~(13)C(α,n)~(16)O and ~(12)C(α,γ)~(16)O reactions. The experimental setup,which includes an accelerator system with high stability and high intensity, a detector system, and a shielding material with low background, will be established during the above research. The current progress of JUNA will be given.