四氟乙烯-乙烯溶液沉淀聚合

本文编制了一个简易计算机程序,测定了氟氯烷溶液沉淀聚合体系中四氟乙烯-乙烯共聚竞聚率:40℃:γC_2H_4=0.156±0.001,γC_2F_4=0.022±0.01670℃:γC_2H_4=0.197±0.001,γC_2F_4=0.055±0.020在此聚合体系中,聚合温度和共聚物组成比对链的规整性都有明显影响。当乙烯在45～55mol%范围内时,共聚物的IR随组成比而变化,利用此规律可简便地测定共聚物的组成比。     

A Novel Polyoxovanadium Cluster Shell: β‐As8V14O42

The hydrothermal reaction of VOSO₄, As₂O₅, piperazine and H₂O produces [H₂N(CH₂)₄NH₂]₄[β‐As₈V₁₄O₄₂(SO₄)]·2HSO₄ ( 1 ), which is the first arsenic‐vanadium cluster containing a spherical β‐As₈V₁₄O₄₂ shell. The structure of this compound was characterized by single crystal X‐ray diffraction, elemental analysis, TG, and IR spectrum. Crystal data for 1 : Orthorhombic, Cmcm, a = 15.369(1) Å, b = 16.404(1) Å, c = 25.772(1) Å, V = 6497.4(9) ų, Z = 4.     

Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

Solvent extraction of uranium(VI) with benzyloctadecyldimethylammonium chloride (BODMAC) from highly concentrated chloride solution

The ²²²Rn emanation fraction (EF) released from the technically enhanced naturally occurring radioactive material (TE-NORM) wastes at certain sites of petroleum and gas production was determined. The samples were analyzed by γ-ray spectrometry to determine the activity concentration of the ²²⁶Ra content, of which the ²²²Rn emanation fraction was calculated. The results showed that the ²²²Rn emanation fraction differs in the oil and gas production sites and it is independent of the activity concentration of ²²⁶Ra. This revised version was published online in August 2006 with corrections to the Cover Date.     

Development of a modified beta-cyclodextrin based fluorosensor for dipyridamole

2,6-O-diethyl-β-cyclodextrins were prepared and immobilized onto silica gel to develop a fluorosensor for dipyridamole. The analytical performance characteristics of the proposed sensor for analysis of dipyridamole were as follows: the detection limit was 0.8 nmol/L with a relative standard deviation of 1.4% for 10 determinations of 50 nmol/L of dipyridamole. The modification of β-CD improved the sensitivity and selectivity for measuring dipyridamole. The recommended method has been successfully tested for the determination of dipyridamole in clinical samples (urine and pharmaceutical preparations). Received: 23 January 1997 / Revised: 14 April 1997 / Accepted: 21 April 1997     

动力学分光光度法测定微量草酸的研究

本文详细讨论了草酸对锡－苯基荧光酮－溴化十六烷基三甲基铵三元络合物显色反应的催化动力学条件，建立了动力学光度法测定微量草酸的新方法，本法Ｓａｎｄｅｌｌ灵敏度为７．４ｎｇ／ｃｍ＾２，草酸浓度在０－１．０μｇ／ｍＬ范围有良好线性关系，方法可直接用于菠菜中草酸含量的测定。     

Liquid-liquid extraction of thorium(IV) and uranium(VI) with three ether-amide type tripodands

N,N,N',N',N',N'-Hexaethyl-2,2′,2'-(nitrilotrisethyleneoxy-2-benzyloxy)tris(acetamide) (L3) has been prepared and characterized by using IR, ¹H NMR and positive-ion FAB mass spectra. The extraction of Th⁴⁺ and UO₂ ²⁺ with N,N,N',N',N',N'-hexaethyl-2,2',2'- (nitrilo-trisethyleneoxy)tris(acetamide) (L1), N,N,N',N',N',N'-hexaisopropyl-2,2',2'-(nitrilotrisethyleneoxy)tris(acetamide) (L2), and L3 was studied at 20±1 °C as a function of diluent, concentration of free extractant in organic phase and concentration of picrate in aqueous phase. It was found that the extracting powers of L1 and L2 for Th⁴⁺ are almost identical. The extracting power of L2 for UO22+ was slightly higher than that of L1. The difference in terminal groups (ethyl or isopropyl) of the extractants (L1 and L2) with same backbone has a little effect on the extracting power for both Th4+ and UO22+. The extracting powers of L3 for both Th4+ and UO22+ were larger than those of L1 and L2. The extractants (L1 and L3) having the same terminal group (ethyl) with different backbones have obviously different extracting powers for Th4+ or UO22+. The extracting powers of all three extractants L1, L2, and L3 for Th4+ were larger than those for UO22+. The compositions of extracted species in organic phase were predominantly ThL(Pic)3NO3 and UO2L(Pic)NO3, respectively (L denotes L1, L2 and L3). This revised version was published online in July 2006 with corrections to the Cover Date.     

A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ

The styrene-butadiene rubber (SBR) cured by dicumyl peroxide was reinforced by magnesium methacrylate [Mg(MAA)₂], which was added into SBR directly or prepared in situ in SBR through the neutralization of magnesium oxide (MgO) and methacrylic acid (MAA). The experimental results show that the SBR vulcanizates reinforced by Mg(MAA)₂ prepared in situ have better mechanical properties than those reinforced by Mg(MAA)₂ added directly. The SBR vulcanizates with Mg(MAA)₂ prepared in situ are semi-transparent, but those with Mg(MAA)₂ added directly are opaque. The Fourier transform infrared analysis shows that the polymerization conversion of Mg(MAA)₂ in the SBR vulcanizates with Mg(MAA)₂ prepared in situ is much higher than that in the SBR vulcanizates with Mg(MAA)₂ added directly. The scan probe microscopy photographs show that the particles in the SBR vulcanizates with Mg(MAA)₂ prepared in situ are much finer and disperse more evenly than that in the SBR vulcanizates with Mg(MAA)₂ added directly.     

Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

A 3-D noninterpenetrating diamondoid network of a decanuclear copper(I) complex

The solvothermal reaction of CuCl(2).2H(2)O with pyridine-4-thiol and ethanol yielded a novel photoluminescent 3-D polymeric complex with an interesting decorated diamondoid network that is constructed of decanuclear copper(I) cluster units and mu(4)-Cl ligands. The in situ generation of CuSO(4).5H(2)O implies the spontaneous occurrence of desulfurization and redox reactions in the present system.