Structures, relative stability and dissociation of [Si,N,C,O]2+ isomers

Fifteen isomers of [Si,N,C,O]²⁺ system are obtained at UB3LYP/6-311G(d) and UCCSD(T)/6-311+G(2df) (single-point) levels. The analyses are made for predicting the structures of optimized isomers, while ionic fragments with lower energies are suggested. The calculated results indicate that linear isomer SiNCO²⁺(²Π) is thermodynamically the most stable species in [Si,N,C,O]²⁺ system, followed by linear SiOCN²⁺ (²Π), SiCNO²⁺ (²Π), and SiC(NO) (²A) with NCO three-membered ring. The order of stability of several kinetically stable isomers is SiNCO²> SiCNO²⁺ (²Π)>SiOCN²⁺>SiC(NO)²⁺>OSiNC²⁺ (²Π). The obtained results by analyzing the isomerizations and ionic fragment patterns show that the signal peaks of [Si,N,C,O]²⁺ are attributed to the contribution of linear SiNCO²⁺ species, which is metastable and can dissociate to the ionic fragments in the mass spectrometry experiments.     

Flow-injection analysis based on a membrane separation module and a bulk acoustic wave impedance sensor – determination of the volatile acidity of fermentation products

A novel flow-injection analysis (FIA) system has been developed for the rapid determination of the volatile acidity of some fermentation products like vinegars and juices. The proposed method is based on the diffusion of volatile acids, mainly acetic acid, across a PTFE gas-permeable membrane from an acid stream into an alkaline stream, and the acids trapped in the acceptor solution are determined online by a bulk acoustic wave impedance sensor based on changes in the conductivity of the solution. It exhibited a linear frequency response up to 10 mmol · L^–1 acetic acid with a detection limit of 50 μmol · L^–1, and the precision was better than 1% (RSD) at a through-put of 72 h^–1. The effects of operating voltage for the detector, cell constant of the electrode, composition of acceptor stream, flow rates and temperature on the FIA performance were also investigated. Received: 2 June 1997 / Revised: 7 July 1997 / Accepted: 12 July 1997     

Self-assembled nanoparticle probes for recognition and detection of biomolecules

Colloidal gold nanocrystals have been used to develop a new class of nanobiosensors that is able to recognize and detect specific DNA sequences and single-base mutations in a homogeneous format. At the core of this biosensor is a 2.5-nm gold nanoparticle that functions as both a nano-scaffold and a nano-quencher (efficient energy acceptor). Attached to this core are oligonucleotide molecules labeled with a thiol group at one end and a fluorophore at the other. This hybrid bio/inorganic construct is found to spontaneously assemble into a constrained arch-like conformation on the particle surface. Binding of target molecules results in a conformational change, which restores the fluorescence of the quenched fluorophore. Unlike conventional molecular beacons with a stem-and-loop structure, the nanoparticle probes do not require a stem, and their background fluorescence increases little with temperature. In comparison with the organic quencher Dabcyl (4,4'-dimethylaminophenyl azo benzoic acid), metal nanoparticles have unique structural and optical properties for new applications in biosensing and molecular engineering.     

An investigation of the chemiluminescence reaction in the sodium hypochlorite–folic acid–emicarbazide hydrochloride system

A chemiluminescence method for the determination of folic acid by the sodium hypochlorite–folic acid–semicarbazide hydrochloride system with a new flow injection technique has been established. The new method can perform simple, sensitive and rapid determinations of folic acid. The response to the concentration of folic acid, in the range of 1.0×10⁻⁷5.0×10⁻⁵ g/ml, is linear. The relative standard deviation of the method is 2.3% (C_s=4.0×10⁻⁶ g/ml, n=11). The detection limit is 2.7×10⁻⁸ g/ml. This method is suitable for automatic and continuous analysis, and has been successfully tested for the determination of folic acid in a folic acid tablet.     

Robust self-assembled octadecylphosphonic acid monolayers on a mica substrate

As determined by scratch tests, self-assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) on a muscovite mica substrate were found to be mechanically robust and to serve as a lubricant to protect the underlying mica substrate. For comparison purposes, three polymer films were subjected to scratch tests under the same conditions. The scratch tests were conducted using a diamond-tipped stylus, and the resultant scratches were examined using atomic force microscopy. The excellent mechanical strength of OPA SAMs is supported by analysis with time-of-flight secondary ion mass spectrometry, which suggests that the headgroup of the OPA is strongly bonded to the substrate atoms. The molecular lubrication provided by OPA SAMs suggests that the interaction between the headgroup and the substrate is sufficiently strong to endure significant shear force and that the hydrocarbon chains are able to dissipate shear energy.     

压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

Mass spectrometric study of six cyclic esters

A series of cyclic esters, which are optically active as a consequence of their helical structures, were synthesized to investigate the relationships between their structures and their optical activities. This paper reports the electron impact fragmentation mechanisms of these six cyclic esters. Accurate mass measurements and mass analyzed ion kinetic energy spectrometry confirmed fragmentation patterns. The stability of the fragment ions has a great influence on the fragmentation pathways, but no correlation with the optical activity was found.     

Effects of simultaneously doped and deposited Ag on the photocatalytic activity and surface states of TiO2

Ag-TiO2 catalysts with different Ag contents were prepared via a sol-gel method in the absence of light. Based on the characterizations of XRD, photoluminescence (PL), surface photovoltage spectroscopy (SPS), field-induced surface photovoltage spectroscopy (FISPS), and XPS as well as the evaluation of the photocatalytic activity for degrading rhodamine B(RhB) solutions, it was found that the Ag dopant promoted the phase transformation as well as had an inhibition effect on the growth of anatase crystallite. The PL and SPS intensities were decreased with increasing Ag content, indicating that the Ag dopant could effectively inhibit the recombination of the photoinduced electrons and holes. However, the active sites capturing the photoinduced electrons reduced, while the Ag content exceeded 5 mol %. At rather low Ag dopant concentrations, the migration and diffusion of Ag+ ions were predominant, while at rather high Ag dopant concentrations, the migration, diffusion, and reduction of Ag ions simultaneously occurred. The Ag-TiO2 photocatalysts with appropriate content of Ag (Ag species concentration is from about 3 to 5 mol %) possessed abundant electron traps so as to be favorable for the separation of the photoinduced electron-hole pairs, which could greatly enhance the activity of the photocatalysts. From the results of FISPS measurements, it could be found that the impurity bands and abundant surface states were introduced into the interfacial layer of TiO2 because of Ag simultaneously doping and depositing, which could improve the absorption capability for visible light of the photocatalysts.