Construction and analytical application of ion-selective piezoelectric sensor for atropine sulfate

The method describes the use of a piezoelectric quartz crystal (PQC) as a substitute for ion-selective electrodes. The approach is feasible when the membrane materials are electrically non-conductive and membrane potential measurements are consequently not possible. An ion-selective piezoelectric sensor sensitive to atropine sulfate was constructed by coating a PVC membrane containing activant on one the side of a PQC. On the basis of selective adsorption of atropine ions across the modified film and the sensitive mass response of PQC, the method exhibits a sensitive, rapid response and is easy to operate without pretreatment of the sample. The logarithm of the frequency shift gave a linear relationship with the logarithm of atropine sulfate concentration in the 1.0 x 10(-8)-1.0 x 10(-3) M range with a detection limit of 5.0 x 10(-9) M at pH 7.0. Recoveries were from 98.7-102.2%. Two activants, atropine tetraphenylborate and atropine dipicrylaminate, were synthesized and investigated. Influencing factors were also examined and optimized. The results for real samples obtained by the proposed method agreed with those obtained by conventional methods.     

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

Preparation and characterization of a novel pH-sensitive ion exchange resin

Methylacrylic acid/styrene cross-linked with divinylbenzene is a novel pH-sensitive ion exchange resin. Microspheres of this resin were characterized by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The microspheres showed a pulsatile swelling behavior when the pH of the media changed. The pH-sensitive microspheres were loaded with salbutamol sulfate and the drug-release characteristics were studied under both simulated gastric and intestinal pH conditions. The results obtained showed that the drug release also depended on the pH of the release media.     

Triboelectric pulsed direct current for self-powered sterilization of cellulose fiber

A variety of liquid energy exists in papermaking engineering and has not yet been developed and utilized. In addition, for the papermaking industry, the presence of slime can seriously affect the quality of the finished paper and can lead to paper breaking. The current slime control strategies cannot completely solve the problem and also have some low toxicity. In this study, a method of self-powered sterilization of cellulose fibers by using triboelectric pulsed direct current is reported. A liquid–solid triboelectric nanogenerator (L–S TENG) was used to convert the liquid energy of nanocellulose suspension into electrical energy and convert this electrical energy into pulsed direct current for self-powered sterilization of cellulose fiber. A hydrophobic coating material is used as solid triboelectric material and electrode for sterilization. Driven by L–S TENG, the electrodes exhibited an excellent sterilization rate against four microorganisms including Escherichia coli, Aspergillus niger, Candida albicans, and Klebsiella pneumoniae, which from slime in the papermaking industry. This study could provide a basic research theory for liquid energy harvesting in the papermaking industry, and also provide a new strategy for pulp sterilization.

Graphical abstract

     

Microdetermination of sulfite with a piezoelectric crystal detector

A piezoelectric method is proposed for the determination of sulfite in concentration range 1 × 10^–7–1 × 10^–5 mol/1. The method is based on the redox reaction of sulfite with iodine followed by measuring frequency change of the piezoelectric crystal caused by the unreacted iodine. The method is applied to the determination of sulfite in liquor.     

De novo sequencing of tryptic peptides sulfonated by 4-sulfophenyl isothiocyanate for unambiguous protein identification using post-source decay matrix-assisted laser desorption/ionization mass spectrometry

A simple method of solid-phase derivatization and sequencing of tryptic peptides has been developed for rapid and unambiguous identification of spots on two-dimensional gels using post-source decay (PSD) matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The proteolytic digests of proteins are chemically modified by 4-sulfophenyl isothiocyanate. The derivatization reaction introduces a negative sulfonic acid group at the N-terminus of a peptide, which can increase the efficiency of PSD fragmentation and enable the selective detection of only a single series of fragment ions (y-ions). This chemically assisted method avoids the limitation of high background normally observed in MALDI-PSD spectra, and makes the spectra easier to interpret and facilitates de novo sequencing of internal fragment. The modification reaction is conducted in C(18) microZipTips to decrease the background and to enhance the signal/noise. Derivatization procedures were optimized for MALDI-PSD to increase the structural information and to obtain a complete peptide sequence even in critical cases. The MALDI-PSD mass spectra of two model peptides and their sulfonated derivatives are compared. For some proteins unambiguous identification could be achieved by MALDI-PSD sequencing of derivatized peptides obtained from in-gel digests of phosphorylase B and proteins of hepatic satellite cells (HSC).     

Microfluidics: from dynamic lattices to periodic arrays of polymer disks

We used coupling of flow and geometric confinement to assemble emulsion droplets in two-dimensional gliding lattices with a high degree of order and symmetry. Highly monodisperse discoid droplets with circular shapes were generated in a microfluidic flow-focusing device. Originally, close-packed lattices formed from these circular discoid droplets. Progressive confinement led to the gradual deformation of the circular disks: first, they elongated in the direction parallel to the direction of flow and then transformed into hexagons. Assembly driven by the combination of flow and confinement also allowed for the formation of lattices from droplets with a bimodal size distribution. We used photopolymerization of the monomer droplets to trap the lattice structure in the solid state and produce highly periodic arrays of solid polymer disks.     

动力学光度法测定痕量钴的研究

催化动力学法测定微量Co~(2+)已有报道,方法灵敏度一般在10~(-6)～10~(-10g)数量级,多数用于测定水、血液和高纯物质中的Co~(2+),而测定中药內的痕量CO~(2+)还未见报道。本文研究了氨水介质中Co~(2+)催化二苯偶氮酰肼氧化褪色的新指示反应及动力学条     

Phenyl and Phenylethyl Glycosides from Picrorhiza scrophulariiflora

Three new phenyl glycosides, scrophenoside A ( 1 ), B ( 2 ), and C ( 3 ), and two new phenylethyl glycosides, scroside D ( 4 ) and scroside E ( 5 ), were isolated from the stem of Picrorhiza scrophulariiflora Pennell (Scrophularlaceae), besides five known compounds. On the basis of spectroscopic evidence, the structures of the new compounds were elucidated as 4‐acetyl‐2‐methoxyphenyl 6‐O‐[4‐(β‐D ‐glucopyranosyloxy)vanilloyl]‐β‐D ‐glucopyranoside ( 1 ), 4‐acetylphenyl 6‐O‐[(E)‐p‐coumaroyl]‐β‐D ‐glucopyranoside ( 2 ), 4‐[(1R)‐ and (1S)‐1‐hydroxyethyl]‐2‐methoxyphenyl β‐D ‐glucopyranoside ( 3a and 3b , resp.), 2‐(3,4‐dihydroxyphenyl)ethyl O‐β‐D ‐glucopyranosyl‐(1→3)‐4‐O‐[(E)‐feruloyl]‐β‐D ‐glucopyranoside ( 4 ), and 2‐(3,4‐dihydroxyphenyl)ethyl O‐β‐D ‐glucopyranosyl‐(1→3)‐6‐O‐[(E)‐feruloyl]‐β‐D ‐glucopyranoside ( 5 ).     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.